Appointment mysteriously refused to sync - it worked very well - Palm 755 p, HotSync Manager 7.0.2 Outlook 2007, XP Pro, USB

Similar Questions

• I get message "USB device not recognized", but two USB devices are actually works very well. Poster sometimes Device Manager 'unknown device', then it will disappear and reappear.

  Poster sometimes Device Manager 'unknown device', then it will disappear and reappear with the error message.  Sometimes, I see the message even when there is nothing in the USB port.

  Hi malsnano,

  I see that usb devices do not work on xp. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to these usb devices?

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  M odes 2:

  Put the computer in a clean boot state, then check if that helps.

  How to solve the problem by performing a clean boot state:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in step 3: to reset the computer as usual.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart the computer and Windows XP will automatically reinstall all USB controllers.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• Cannot sync iphone calendar SE back to Oulook (Outlook synchronization works very well)

  Just bought iPhone SE (in lieu of 5 c).  I use Outlook on my PC for the Contacts and calendar.  My vision is synchronize Contacts to and FROM my new thin phone, calendar is only one-way synchronization.  I can sync the new events FROM Outlook to my phone, but cannot sync new calendar items, I got on my phone into Outlook.

  When I go in the calendar APP on my phone and click here to see the calendars are listed, he said FROM MY PC and calendar is checked.

  When I go into SETTINGS-Mail, Contacts, calendars and look at the Contacts - default account it says MY PC, but I don't have the same option for the calendar.

  It's only my calendar app that is not synchronized to my PC, the contacts app works very well.

  Can anyone help please?

  Have you tried a cloud calendar & contact sync? (Gmail, Exchange, Outlook, Yahoo, etc.)

  It's instantaneous, no lag/delay, always up to date.

• I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not Lightroom app.

  I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not the App mobile Lightroom Dave

  Hello

  There is no feature that can do this in Lightroom Mobile from now.

  You can post your comments/idea here Photoshop community customer family

  Thank you

• After years of work very well and no recent change, my thunderbird now refuses to retrieve emails from one of my 3 email addresses. What should I do?

  Last week he had slowed down considerably in the recovery of messages to this e-mail address, but now it doesn't work at all. The other three addresses properly.

  The email address that does not work very well on my phone and on the webmail, but not on thunderbird.

  You can do this:

  • Create new folders if necessary.
  • Move all emails that are in the Inbox in the appropriate folders.
  • Delete emails you don't want to.
  • When the Inbox is empty, do a right-click on the Inbox, and then select "compact".
  • then try Get Mail.

• Work very well iMac 27 mid-2011 with 4MEM error code

  Hi, I have an iMac 27 inches, mid-2011 with 4 GB installed original (Elpida so-DIMM) so I improve it with 4 new 4 GB Kingston (ram value) KVR1333 PC3-10600 1333 Mhz DDR3 DIMMS for a total of 16 GB, after that my iMac works very well for three years with the daily use of any question and everything seems normal in "about this Mac" and in the "memory" tab no software issues no kernel panic , anything with a strange behavior, until three years after the upgrade memory, now I run AHT because the other reason (I can't work with a new MBP Mid 2012 airdrop both with El Capitan OS X) and it shows me a 64/4MEM/40000000: 0x8893cb98 error code, I reset the NVRAM and SMC, and same result AHT , so use MemTest86 from a V6.3.0 of bootable CD (full test upward at the end time spent 23 hours) and V4.3.7 showing no error in the two tests, also I ran mdsched.exe RAM Memory Sticks Checker windows (I have Windows 7 64 bit family Premium installed in bootcamp) and no ram detected error.

  While I should care that error? should I change my Ram modules?

  Thanks in advance

  You have a faulty memory card or the slot. That's what the error means generally. Make an appointment with the Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.

• You tube use work very well for me in Fire Fox... Now the habit... I don't remember changing anything whatsoever.

  You tube shows just a black screen, works very well in internet explore.

  Haven't upgraded or changed versions of firefox or added any plug=ins Im awarer of.  Had several automatic updates come through of other programs, such as flash, ect.  But I have refused to upgrade firefox due to having to give up screen grab which I love too much to do it, so have stayed with  older version.
  

  Had no problem with you tube in the past.
  

  First, you must immediately update to Firefox 15.0.1. There are major security issues in Firefox solved in 15.0.1 7.

  In regards to your add-on, it will probably work in Firefox 15 (addons are now default to compatible). If this isn't the case, you can try to install https://addons.mozilla.org/en-US/firefox/addon/screengrab-fix-version/ which is an update on the same module version.

  After update, let me know if the youtube problem is still happening.

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have the UI which downloads the file in file multiprt transfer in chuncks. It worked very well in a previous version of firefox, but now ajax calls gets abandoned?

  I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.

  Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!

• Firefox does not display my photo site properly, or play music from it on my new computer. I have 2 other PC and it works very well on those.

  Just set up a new PC and downloaded Firefox. It will not display correctly my Zenfolio Photo site or it will play music that accompanies the slideshow on the home page. I have 2 other PC and it works very well on them. All are Windows 7 Home Premium.

  Yes. He uses Flash to show the images and music. Go to tools-> Add-ons and check the Plugins. Make sure that Shockwave Flash 16.0.0.305 is not set to never turn on. I keep me always activate.

  If you do not see flash, can get Adobe Flash here: https://www.adobe.com/products/flashplayer/distribution3.html and the EEG for the Plugin-based browsers.

  If flash is installed, then it sounds like something is blocking.

• One of my computers works very well to display my beneficiaries of my bank online and the other computer says that I don't have any beneficiary, worm 35 on both.

  Everything on my online banking Web site works fine except the display of my beneficiaries. It does not, he tells me that I don't have any beneficiary. This function works very well on my backup computer with 16, 32, and 35 versions.

  That's what my Bank said:
  There was some problems with the compatibility of Firefox to view online recipients. Please, try the following steps to clear the cache and delete cookies. If there is still a problem, start Firefox in Mode safe. While you are in safe mode, press the < Alt > or < F10 > to display the toolbar. Then select Tools > Options > advanced > general. Find and stop using hardware acceleration.

  Boot in safe mode to fix the problem, but it's a bit of a pain. A refreshment or a reset seems a little drastic and I would like to know what exactly is the problem before using the shotgun approach.

  Thank you

  Thanks for the replies. I have try to disable hardware acceleration, but probably no connect fees. My only add-on is edge of adblock and I disabled it for the site. The thing is, I don't want to disable either of these elements. I'll just start firefox in safe mode, if I need to access my beneficiaries. I was hoping that someone may know something that is bad in my profile that has carried over from previous versions or another kind of corruption. It seems strange that an entire site could work very well with hardware acceleration, but not to this one point.

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• Use Firefox with flash 10.3.183.75 20.0.1, can not see the video if its built-in Flash. Can see perfectly if they are not incorporated. Chrome works very well.

  http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.

  flash_ready.html
  <!DOCTYPE html>
      <html>
          <head runat="server">
              <title>
                  HTML5 sample video player
              </title>
  </head>
  <body>
   <form id="Schedule" runat="server">
      <div >
  	  <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true">
          </EMBED>
  		</div>
  		</form>
  </body>
  </html>
  
  videoplayer3.html
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Sample HTML5 Video player</title>
  
  </head>
  
  <body>
  
  <h1>Sample HTML5 Video player demo</h1>
  
  <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360">
  	<param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" />
  	<param name="allowFullScreen" value="true" />
  	<param name="wmode" value="transparent" />
  	<param name="flashVars" value="controls=true&amp;poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&amp;src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" />
  	<img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  </object>
  <p>
  	<strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a>
  </p>
  </body>
  </html>

  I used this instead of < embed >. He began working

  < object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >

• GasBuddy web site not working properly with firefox, but works very well with Explorer

  I noticed when I load the site gasbuddy.comweb, it does not work properly. It does not load, simply do not perform as it should. When I try to use gasbuddy.com to explore 9, it works very well. I already tried to work in safe mode and it does not solve the problem with gasbudy.com. Any suggestions on how to solve the problem? I made a discovery, and I'm very careful about deleting my cookies. It seems that when I do the procedure, I'm losing too much info on some web sites - weather.comweatherunderground, etc.. Just do not know how to delete cookies for a problem with the cause of other problems? Thank you.

  Could check you your zoom here:

  ALT + v (open the menu Classic view) > Zoom > Zoom text only

  If I have this on (checked) then the middle column moves to the right and superimposed on the right column. If I have that turned off, then the page zoom correctly.