Appropriate measures for the first review of Apple without stress

Similar Questions

• The album art to music Apple AirPlay or Spotify is only shown for the first song

  Apple TV 4 running tvOS 9.2

  Antenna of the iPhone 6 s running iOS 9.3.2

  When the music plays to Apple TV since iOS album art appears for the first song in an album or a playlist. After the next song, the album art shows a gray music note. It's intermittent, but it happens often. Seems to happen more consistently with Spotify, but also happens with Apple music.

  I've noticed that when my ATV 4 AirPlaying Slacker Radio. In my case, they are long unique jazz tracks, and the album cover cannot paste at the end of the track. Of course, lazy, don't return because it has already been sent. I guess the software decides she has had enough and deletes the image. You can try to post on the site of feedback to Apple, but I think it will be a low priority.

• I am in charge for the first time.  How long should it take?  I check battery during the charge percentage?

  I'm charging my Apple Watch 1 for the first time.  It has been more than 2 hours, and it shows the green lightning when I touch the face.  How long does take to recharge?  Is there a way to check the level of the battery during charging?  How can I tell when it is fully charged?

  You can take a look at this page of the Apple Watch user's Guide. http://help.Apple.com/watch/#/apd2b717523a

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• Mac keeps crashing "no directory for the bundleID element: com.apple.cloudd.

  My mac mini crashes several times a day.  I have collected several Console logs when the accident took place (see below for more details).  It seems that the problem is:

  "No directory for the bundleID element: com.apple.cloudd.

  I'd like to find out program that is causing the computer down (full machine reboots)?  How can I solve this problem?

  A few details...

  = Presentation of the material =.

  Model name: Mini Mac

  Model identifier: Macmini7, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM version: MM71.0220.B03

  Version of the SCM (System): 2.24f32

  Serial number (System): C07NT9MAG1HW

  Material UUID: FDCB795C-A2BF-5D6D-94F3-F98871A90B89

  = NEWSPAPERS FOR EXAMPLE 1 =.

  Crash at 07:22 (screen displayed this time on the clock at the time of the accident)

  30/11/15 7:16:03.742 PM DashlanePluginService [29307]: iextension: here?

  7:19:40.671 30/11/15 PM firefox [21134]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.

  30/11/15 com.apple.WebKit.WebContent [22900 7:20:37.499 PM]: ignoring controlTimebase defined by customer, because AVSampleBufferDisplayLayer has been added to a Synchronizer

  30/11/15 com.apple.WebKit.WebContent [22900 7:20:45.263 PM]: ignoring controlTimebase defined by customer, because AVSampleBufferDisplayLayer has been added to a Synchronizer

  7:20:55.956 30/11/15 PM firefox [21134]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.

  30/11/15 7:25:11.064 PM distnoted [271]: time absolute # distnote proxy server: time civil 102.815157338: Mon Nov 30 19:25:11 2015 pid: 271 uid: 504 root: no

  30/11/15 7:25:12.403 PM nsurlsessiond [281]: no directory for the bundleID element: com.apple.cloudd

  30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (panicHeaderLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable

  30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (panicMessageLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable

  30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (reportButton) out of (ReportPanicAppDelegate) (NSButton): missing setter or instance variable

  30/11/15 7:25:13.715 PM ReportPanic [280]: ReportPanic cannot stat /Library/Logs/DiagnosticReports/Kernel_2015-11-24-214348_kelley2015s-Mac-mini.p anic

  30/11/15 7:25:14.324 PM pboard [292]: try to break the link previous memory shared when starting returned an error.  Continue...

  = NEWSPAPERS FOR EXAMPLE, 2 =.

  Crash at 08:55 (screen displayed this time on the clock at the time of the accident)

  8:54:09.088 26 11 15 PM QuickLookSatellite [4488]: could not get the extension of sandbox for path=/Users/family/Library/Caches/com.apple.quicklook.satellite. Errno:1

  8:54:09.088 26 11 15 PM QuickLookSatellite [4488]: could not get the extension of sandbox for path=/Users/family/Library/Caches/com.apple.quicklook.satellite. Errno:1

  8:55:10.785 26/11/15 PM firefox [326]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.

  8:57:58.043 26 11 15 PM distnoted [266]: time absolute # distnotete proxy server: time civil 114.108837760: Thu Nov 26 20:57:58 2015 pid: 266 uid: 504 root: no

  8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (panicHeaderLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable

  8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (panicMessageLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable

  8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (reportButton) out of (ReportPanicAppDelegate) (NSButton): missing setter or instance variable

  8:58:04.421 26 11 15 PM ReportPanic [271]: ReportPanic cannot stat /Library/Logs/DiagnosticReports/Kernel_2015-11-24-214348_kelley2015s-Mac-mini.p anic

  8:58:04.426 26 11 15 PM nsurlsessiond [272]: no directory for the bundleID element: com.apple.cloudd

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• You try to run the Vertex vprtmupd for the first time

  I am trying to run the Vertex vprtmupd for the first time on a new Linux installation. I'm on 11.5.10.2 and that you ran as the "Quantum program Setup ' without problem has a great!
  
  I tried to run "Quantum Data Update install" and it failed with this error:
  
  HR_6882_HRPROC_ASSERT
  LOCATION py3vntsetup:2
  APP-PAY-06882: Assertion failure detected at the location py3vntsetup:2.
  
  Cause: an internal error has occurred at the location py3vntsetup:2.
  
  Action: contact your Oracle customer representative.
  
  
  I then tried to run, he manuly by typing 'vprtmupd' and this is what happened:
  
  
  Selection of a monthly update function
  --------------------------------
  1 - update of the tax base
  2 - program output
  
  Select: 1
  
  Starts the update process monthly payroll tax.
  
  Enter the Data Source: /u01s/app/oracle/appl/pay/11.5.0/vendor/quantum/data
  Cannot establish a connection with the database of the payroll tax. Check the
  information entered and try again.
  Press Enter to continue...
  
  
  CAVEAT! The update process will destroy the contents of the
  current database before creating a new. Please do
  a backup before continuing.
  
  Any idea? It seems that I need the tax database created before the "vprtmupd" program works. How to create the tax database for the first time?

  I tried to run "Quantum Data Update install" and it failed with this error:

  HR_6882_HRPROC_ASSERT
  LOCATION py3vntsetup:2
  APP-PAY-06882: Assertion failure detected at the location py3vntsetup:2.

  Search MOS 'APP - COMPENSATION - 06882 Quantum' and go through the docs (see below first).

  Enter the Data Source: /u01s/app/oracle/appl/pay/11.5.0/vendor/quantum/data
  Cannot establish a connection with the database of the payroll tax. Check the
  information entered and try again.
  Press Enter to continue...

  Please see if (the Vertex 'diagnos' program fails with "open base failed" [760411.1 ID]) applies.

  Thank you
  Hussein

• Order for the first time lost all work and settings.  It can be recovered?

  Close my new Macbook Pro for the first time.  I lost all my work and my settings.  Almost anything can be recovered?

  He was an administrator account or a guest account?

• ICloud using photo library for the first time

  I am considering switching to iCloud photo library for the first time - mainly so I'll be able to use the new functionality of memories in iOS 10. However, I have quite a large library of Photos on my Mac and I'm worried about the mistakes of synchronization, bugs and any damage my irreplaceable photos. I have a Time Machine backup, but each backup on which generally only lasts a week or so, and with a large library of errors can take some time to appear. Should I be worried? Are there precautions I need to take?

  In view of all the people who use it, there are very few messages on issues. Since you have a backup, you can still recover. You can consider to get a 2nd external and make a copy of your photo library in order to have 2 backups. Depending on the size of your library, you may need to purchase additional iCloud storage as free storage space is 5 GB. With a large number of photos, it will take much time to complete the synchronization. Some people have posted their s took 2 to 4 weeks. Our respective synchronization went well and we had no problem.

  Downgrades and upgrades of storage

• Turn on iPhone 5 s for the first time?

  Hello

  I just bought all new iPhone 5 S in a shop and after I searched (google) answers with regard to the maintenance of the battery, I'm a bit confused. Some say it is wise to drain the battery until the phone turns off and that completely... some people say that is nonsense so that you must charge your phone charge straigh away from the box and don't let not phone to turn off... some are mentioning the procedure 3 hours but I know it's nonsense...

  Can you tell which procedure is best for the first time.

  Thank you very much.

  Here's what I consider some good advice on the pricing of your iPhone:

  When to charge your iPhone or iPad

• When I rt - click message how can I move "Delete msg" of last resort for the first option

  You want to move the Message 'remove' the last option when you right click for the first option.

  I don't know how it's easy that would be, but if you left click ONCE to highlight the message, or if it is already highlighted, you can press the delete key to remove the message.

• Windows7 64 bit. Why the desktop icons all be empty when you run Firefox nightly for the first time?

  Every time after I get a Firefox Nightly update and run it, it will display the next page:
  https://www.mozilla.org/en-US/firefox/nightly/firstrun/?oldversion=30.0 which is fine.
  But when it opens this page, all my desktop icons go clear/white and one by one, they all return with their correct icons. And all this happens in a few seconds.
  Why is the operation of Firefox every night for the first time, my desktop icons?

  I suspect that you have both nightly and Firefox version installed?

  "The Firefox 'about' shows 30.0. and I've now checked for updates and are now running 33.1.1"
  

  It's different from what you have first published here with!
  Firefox 33.1.1 represents the latest version - a 32-bit version.

  Whereas, the version you first posted here with was a generation of 64-bit channel every night from July. Every night is for "Alpha-testers" and is updated every day, where the name of "night".

  Everything that happens in the background on the Windows desktop should not be of concern right now, every night Win 64 bit is several months out.
  If you really want to test the Win 64 Nightly builds, follow and participate in the very different evenings and son of 'channels' on MozillaZine forum is based.

• YouTube load black screen for the first five seconds

  As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

  You can check the problems caused by the recent updates of Flash and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Firefox crashes while loading images for the first time after windows starts upward

  every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
  thing I tried
  Start windows and Open firefox in safe mode (does'nt fix the problem)

  updated 13 solved the problem...!

• Satellite L650D: how long I leave it on charge for the first time?

  recently bought this computer series Toshiba Satellite L650D and I was wondering how long I leave on the royalties for the first time to power?

  Help, please

  Hello

  My laptop is still connected to the power adapter, so would always charge the battery.
  But usually the battery led turn green if the battery should be fully charged.
  Let the adapter connected until this witness would turn to green or blue (based on the model that you bought for)

• How much time must be recharged Satellite Pro U200-10 b for the first time

  Hello

  How long the computer laptop Saturday Pro U200-10 b should there be for the first time?

  Kind regards
  CC

  Hi Christoph

  That s easy. You must charge the battery for laptops up to the battery LED switches to green light or blue. I put t know exactly the LED on the U200 Pro colors.

  A hint; all the details should be in the manual of the user who is always pre-installed on Toshiba laptops
  There, you will find also information about the battery and manipulation.

  Concerning