Apps denied the lack of test material?

Similar Questions

• App deny the reason: "App appears either too small or too large on the device.

  Unfortunately, the test app time seems to be very long and short answers standard.

  I send my application in January and has received a refusal, a month later at the end of February. The corresponding email a few days later just said "the app doesn't appear correctly on the device, it seems too small or too big on the device."

  Anyone who receives a simular response and give additional assistance?

  (By the way, I tested the course before app on my Alpha device and the Z10 and Q10 Simulator and it still works without any problem at all.)

  Dear samyotte,

  Thank you for your kind support offer :-)

  The very good news is that the app has been approved now :-)

  About the ancient city deny the reason I have no idea - maybe it happened due to the current large amount of applications that need to be reviewed. In any case, I'm really happy of approval!

  Best regards

• When I download the first app in the cloud for testing, there is no "open" button when it is installed. ??!!

  

  Please, try the following steps.

  1. Disconnect from creative cloud.
  2. Revive the creative cloud > connect to it and share the results.

  You can check: launch Adobe Creative Cloud apps

• the lack of simulated material

  I just installed Labview 2015 and DAQmx 15.1.1. I am unable to find digital 6552 or 4130 4110 power supply cards or an i/o card in the list of simulated devices.

  This screenshot shows the entire list that I can see. No power option.

  Do I need additional drivers until I see these devices?

  

  None of those are DAQ devices so expect them to be missing. Download the correct drivers (DC-Power, HSDIO) and go from there. I'm not sure of the digital camera, but I think you can use others with IVI and capacity of simulation.

• App failed to load after the addition of test devices

  Hello

  I made a soft, did a dev ipa and installed on my iPad. Worked.

  But now I need to test it on another iPad as well.

  So I deleted the files mob Prov., added the new iPad and a new mob Prov. files.

  But now the app will install more.

  I made a new app ID > did not work

  I tried to do it again with only the original iPad app > even that no longer works.

  What can be the problem?

  Thank you!

  Restart your iPad and check out them. Also make sure the UDID match.

  Usually this error is due to certificates or UDID lack of files Mobile start-up.

  Recreate the certificates from scratch with the new app ID (do not use ' * ' in the App ID for example com.company. *). Make sure that you have unchecked iCloud in section ID App.

  Set up your devices (Add UDID and device name of the device in the devices section).

  Recreate App with new certificates.

  Remove old syncd APP in the iPad. Sync and install new .ipa

• Test app is in contradiction with the original app in the playbook

  I created an application using webworks for BB10, tried to test on the book of game, installed through BlackBerry Tablet OS chart Help, he worked for another POC, created a new test application using the same file config.xml (that changed the Id and version), after the test I deleted the application of test of the playbook, changed my original, installed in the playbook app , it has installed but... When I click the icon, the old test application open! ??? What could the problem? How to solve?

  Ooops... config.xml: did not...

• Installation/test app on the new simulators after building with older SDK?

  Hello world

  I'm trying to build an application that is compatible with the version of the JDE 4.3.0, but test this application on as many newer devices (Bold, Storm, Curve, etc) as possible.

  I use my Eclipse IDE.

  My journey has been:

  -Build and sign the application in Eclipse, after changing the installed components (window > Preferences > Blackberry JDE > installed components) to 4.3.0.

  -Change the components installed in a JDE later (e.g. 4.7.0)

  -Do NOT rebuild after the change is made

  -Run the debugger for a 4.7.0 - compatible device (e.g. storm).

  However, after you complete these steps, I don't find the app in the Simulator in the Downloads folder or elsewhere.

  These steps are correct?

  Or, what I need to do something else actually install the app in the Simulator?

  Thank you

  J

  Try the base directory, not the java directory.

• I got a new computer and now tried to download the app but it say try test

  I got a new computer and now tried to download the app but it say try test

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Ive bought a subscription for one year for applications, after that download some apps ive noticed that they are in the 30 days test modes. How can I get my creative cloud acknowledged he paid?

  Ive bought a subscription for one year for applications, after that download some apps ive noticed that they are in the 30 days test modes. How can I get my creative cloud acknowledged he paid?

  Try to connect and then reconnect again.

• How to recover my apps which are lacking in the start screen and access?

  Original title: Apps

  IN the start screen several pre-installed applications are missing, for example maps, news, weather, etc. When I want to re install through the store, I get the message that they are already installed. How do retrieve my apps and access?

  Thanks for your help

  Buri Ram, Hi

  Thanks for posting your question in the Microsoft Community.

  I understand you want to know how to get Windows apps like Maps, Weather, News etc on Start menu are missing. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall applications?

  2. don't remove you applications on the start menu?

  Follow the steps below to get the missing apps in the start screen and check the issue:

  a. press the Symbol of Windows and type one of the missing apps Ex name: cards.

  b. you might see maps in the top left corner, right-click on it and click PIN to start from the bottom task bar.

  c. check the missing applications in the home screen to see the Maps application; Get all missing apps in the same way.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• "App: unplug the slave" method

  I tried to use the ' Appslave isconnect "method on a project with a goal of RIO (MyRIO) currently connected and the method completes without error, but it does not cut the target in my project. I tried to play, selecting items in the project window and making even the project window above and active before you make the call without success.

  How this method is intended to be used?  What happens if I multipl target in my project?

  OK - this issue initially came from a position of LAVA and I'll copy paste the answer I posted here even IF not all relevant here in case someone else needs!

  I played a bit more with the feature today and it really seemed that the invoke node called "App: unplug the slave" had to be called in the aim of RT himself to work, as that proposed on the forum of NOR. Then, I tried other tests to see if it is possible to run a VI directly on an RT target (which is located in your project). At first, I thought that it was not possible and that he could not understand until I found this link: http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657 . I think that gives you actually your solution by explaining that each target has its own instance of the application (also the search to 'Work with Instances of application', as a 'Concept' in the help file for LV [2014 in my case]). Is the way to acquire (or at least my way because I couldn't directly give the IP address of the RIO) was:

  -App-> Project.ActiveProject->-> [appropriate Index] targets-> Application-> "disconnect from the slave.

  Notes:

  -"Project.ActiveProject" seems to be a scripting (bottom of bue) VI

  -The property node 'Application' is located near the end of the list

  Silently, it disconnects the cRIO and may be able to delete your popup if done shortly after asking the RT to restart. With the same reference App, you can also programmatically launch a VI to the target host (even by pressing the arrow to run with cRIO selected target.) It could certainly be useful for you too if you need delay the restart to stop the pop up. I want to say, deploy your application for CompactRIO with the "Run As Startup" active, then get the reference of the App, and run a simple VI that resets the CompactRIO after a few seconds late. During this time, call the node to invoke 'Disconnect the slave' and your pop up should be gone...

  Let me know if it works for you!

• App World store submission I have Apps beta or alpha under test?

  App World store submission I have Apps beta or alpha under test?

  Note: I never presented

  Hello

  You can submit your application to the BlackBerry World but don't forget to uncheck the box that says 'release on BlackBerry World-store front', then your application would have been approved, you can add via the BlackBerry World Sandbox testers (in the Developer Portal) and your application will not be seen by clients on the counter.

  Hope this has helped

• To open the app in the simulator of BB 10 Alpha Dev in debug mode

  Hello

  I develop black berry 10 webworks app. I use the latest version of the sdk provided and the dev alpha 10 blackberry Simulator to run the application. I am also using the ripple chrome emulator to test and debug the application.

  I want to debug the application on the simulator using the browser webkit or something like that, but for some reason I'm not able to do.

  While the application of packing, I inserted the - d option. It says on the bb site which

  "With your application running in the Simulator in a desktop browser, type http://:."

  I tried to but could not see the application in debug mode.

  I tried port numbers, since I was on the apache server

  8080,8181,85...

  Could any body help me with this

  Thank you very much in advance

  See you soon

  Because you added the - d option, it should work very well. All you need to do is put the device/Simulator in developer mode (settings-> Security-> Developer Mode) and I guess you have already done this. In almost all cases, I worked with BB PlayBook and BB10 all what you need to do now is the point of your browser Chrome this URL + port:

  http://:1337
  

  The INVESTIGATION period should not be the problem since you already deployed the app on the Simulator, I guess? So give it a try with the port number and it should work now.

• The ripple to test an application WebWorks

  Hi all!

  I'm a Newbie Hello world as WebWorks development is concerned.

  I use ripple 0.9.0.11 on Mac OS 10.6.8.

  Today is a day. I spent several hours already looking for an existing answer to this question.

  My current goal is to create a 12-page HTML document plain vanilla as a standalone application BlackBerry WebWorks, which can be launched by clicking on an icon on the screen.

  I have successfully completed the steps to...

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/creating_an_app_1885567_1...

  ... so far:

  V development

  Packaging your application in undulation

  In other words, I now have a ZIP file and two files, named StandardInstall and OTAInstall, which contain various files CSO, CSL, COD, ALX and JAD. I'm assuming that the build process was successful, and that these files are made up

  My question is: is it possible to use waving on the Macintosh to test whe WebWorks app itself? In other words, how can I get these files and folders on the emulator to test their "offline"?

  Thanks in advance for your ideas,

  James

  Sorry lexogram, there was some confusion with the terminology.

  When I speak of "Ripple", I refer to the emulator in your screenshot.

  When I say "simulators" I refer to stand-alone simulators, real device that look like this:

  

  These simulators are a much more realistic representation of a device that the ripple.

  You can download these simulators here although I don't know if the Mac is supported or not. It is in these simulators that you can select the file (see photo) > load Java application and you will be able to Simulator of your application on a simulator of 'true '.

  Let me know if you have any other questions.

• Blackberry app in the world running on the Blackberry 10 Simulator

  Hello

  I would like to run blackberry apps world that I download on App world on the Simulator.

  I could do with the pre OS 10 simulators, but with the latest it doenst seem to work, no matter what Application download.

  I tried with different versions of the Simulator including 10.2.2_0X1444

  The Simulator to load correctly.

  I can browse the internet, so I know I have connectivity,

  I can go on the App World and then choose an application to download.

  The progress bar then moves as it downloads the file.

  However at this point, I'm getting the problem. Once the file is downloaded then just get the message 'Installation pending '.

  Is it possible to get an app in the blackberry world to run on the Simulator?

  answered my own question...

  Of

  https://DevNet.madewithmarmalade.com/questions/14729/test-launch-of-a-BlackBerry-bar-file-on-a-Devic...

  The reason is basically because the Simulator is x 86/intel architecture and we build for ARM (device architecture).

  We want to support the Simulator, but various other tasks (for example Windows Phone) platform support take priority for the forseable future. There are some difficulties to support the Simulator with an internal architecture on our side, graphics drivers, etc..

  Note that because the binaries, you can run in the device Simulator BB10 and aBB10 are different (if you use BlackBerry own SDK, it will compile two different binary, one for each architecture), you would not even test a real construction identical and there is always possibility of issue on the device, you do not see on the desktop.