Apps will not refresh when installing Apps is disabled in the Restrictions.

Similar Questions

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• Windows Update fails to install KB2539636, KB2468871, KB2533523. Will not work when installing manually or the other.

  I tried to make these updates manually, but they don't always work. I run Windows Vista 32-bit. Despite receiving an error message when installing updates via Windows Update or manually, when I go to the stop, the icon to install the updates always appears next to the stop button. I click to install updates day and then stop, but when I start my computer again the icon is still there, which indicates that they have not installed correctly.

  Manually update an error message of "> Code update here< does="" not="" apply,="" or="" is="" blocked="" by="" another="" condition="" on="" your="" computer.''="" is="">

  When trying to update by using Windows Update, it seems that everything is going as it should (the update is downloaded, it is made a point of restoration etc.) but after they have finished installing, I get an error message in the sense of "updates not installed correctly. An unknown error has occurred. ».

  This is the first problem I had with the Windows updates. Can anyone help?

  Thank you very much

  Nathan.

  Some people have reported that manually download and install updates succeeded in fact.

  Updates:

  1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
  2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
  3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)

  Make sure you download the one appropriate for your system.

  http://support.Microsoft.com/kb/827218 (ie X 86 32-bit =)

  Install as administrator.

• CS5 will not update when installing on computer 2

  Hi all,

  I installed the version student CS5 on my laptop from disks.  It's the 2nd computer on that I get it.  According to the website of Adobe, this is allowed.  Installation seems to be fine... I can open and edit jpeg photos in PS.  I can't update all the programs in current versions.  Whenever I try, I get an error "some updates could not be installed".  Any thoughts?

  Thank you

  E

  MacbookPro OS 10.8.5

  Try the update from this link: Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  Benjamin

• Current pictures will not transfer when syning. They did in the past. I use a Motorola Droid.

  When I plug into the USB port with the Droid line begins the synchronization operation, but photos latest I took don't yield.  What can I do?

  Thanks for your help.

  Hi dlynch211,

  This can happen if some synchronization settings have changed in Motorola Droid. You can try to check the synchronization settings and see if it helps.

  You can also consult the Motorola support link:

  https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/48689/~/droid-x---transfer-files-to%2Ffrom-my-computer

  Hope this information is useful.

• iTunes will not launch when my iPhone is connected to the pc

  He used to work.  When I open itunes manually iphone 6 syncs and appears in itunes.  Most of the fixes I've seen are for Mac etc..  Is this still a problem of ios on my phone?  I have the latest update to 9.2.1. He has not worked in quite awhile, do not remember what is the last update, he worked with.

  I did a lot of tests by Apple.  Everything was working and in order.  Diagnosis of NAB, which is located in the menu helps in itunes.  The only thing that seemed wrong was that I was not to run the program as an administrator, who I am.  I close itunes and right-click on the icon of itunes and click on "run as Administrator".  I unchecked the option to "automatically sync when this iphone is connected."  Then, I closed itunes.  Right clicked on itunes and "Ran as Administrator" once again I then checked "automatically sync when this iphone is connected".  Close itunes again (while I was doing all this I disconnect and reconnect the iphone).  Then, I plugged in my iphone to firewire (connected to the laptop), once again and low and here's open itunes.  Hop this help someone as well.

• Windows 8 will not let me install acrobat 11, I have the older browser

  I bought a new computer windows 8 and is went to my profile and wanted to download the latest Acrobat Standard 11 on this new computer. When I double click on the download button, it says that my browser is not supported. He said something like I put it to upgrade to the latest version of Internet Explorer,... who I... .and then he says something perhaps that Flash player is wrong... but then I check and Adobe says I have the latest version of the flash player...

  any help on why I can't get the standard AA recongize my browser?

  Thanks David... it seems that my problem might with Windows8 not having the ability to update itself... after I finally solved the problems of Windows8 update... then I was able to access and download the standard Adobe XI... I was using IE 10... and tried to download it from "my account history".

• Debug: the console window will not close when debugging stopped probably because of the windows update.

  http://social.msdn.Microsoft.com/forums/en-us/vsdebug/thread/e6d4a4f5-7002-401a-90E1-6174d7f9e3ca

  Please follow the link above. My question is, if this problem is fixed or us will be suspended and be getting used to the pressure on the button restart.

  Hello

  The question you have posted will be well suited in the MSDN Community. Click on the link below.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New tab page is not refreshed when I delete a site

  I have two problems with the new tab page:

  1. The new tab page will not refresh when I delete a site. I can click on the [X] button to delete a site, but nothing seems to happen. The site remains on the new tab page until I have refresh or reload the page.
  2. Firefox restores all the sites that I delete the new tab page, the next time that I restart Firefox.

  Found the problem:

  DOM. Storage.Enabled apparently affects the new tab behavior (bozhe me!)

  I had mine set to false; Apparently, it breaks the new tab page. Changing to true restored expected behavior.

  Would be nice if the entries in About: Config to http://kb.mozillazine.org/ included a description interconnected how change these options will affect/guy features in Firefox. (And while I'm wishing I join $ 1 million, a pony, and peace in the world). Is life...

  Thanks for your help crazyskeggy and Tylerdowner

• I am trying to print coupons from a Web site. It says I need I'm trying to install Coupon Activator. Then when I try, I get an error message. It will not let me install on my computer.

  I want to print coupons from my computer.  Activator coupon says I need to install it, when I try to install and run the program I get an error message.

  I am trying to print coupons from a Web site. I try to install Coupon Activator. Then when I try, I get an error message.  It will not let me install on my computer.

  Hi Dustin,

  Thanks for posting. You will have to contact the support for the program in which you can not install. If you encounter problems, install any programs please let us know with the exact error message.

  Thank you!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My gmail does not refresh when I connect to my account.

  Original title: gmail is my sign into account but will not regenerate

  my gmail does not refresh when I connect to my account. I know I have mail in my Inbox because it is there on my phone.

  If your gmail email address is your user name Microsoft Account, it is not actually going to receive incoming emails by default.  For example, you can go to www.outlook.com and sign in with your Microsoft Account (your gmail address), but there is no email because the email is really going in the Google Web site.  There is one step more that it takes to get your gmail emails flowing through them so you options for how do.

  1. Configure your Microsoft account to 'pull' your gmail emails
     This method sets the upward so that the Microsoft Account connects to Gmail, downloads email and then displays them on your computer Windows 8.  You make this unique facility of inside Outlook.com.  I've written about how to do it on my blog here (I wrote it for a different purpose, but the steps are identical).

     If you perform this step, you can also delete your Google account from your phone and setup of your phone to synchronize with Outlook.com instead.  You will always get and send emails with your Gmail address, it uses just Outlook as server.

     or

  2. Add your Gmail for Windows 8 Mail App separately
     This option is easier to install, but I do not personally (just because of how Gmail behaves a little different). But there is no problem with him.  I've written about how to do it also with a video demonstration: Use Gmail in Windows 8.

     If you use this option, go to your Mail application settings and uncheck the "E-mail" to your Microsoft Account (the first listed email account) so that you do not have two accounts showing in your email application.

  I would like to know if you have any questions or problems.

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My lexmark X 7550 printer will not display when uac is enabled.

  Original title: user account problems

  My lexmark printer will not display when uac is enabled. I have a lexmark X 7550. Someone has any ideas

  Hello

  1. what happens when you try to print the User Account Control (UAC) is enabled? You get the error message? After return the correct error message if applicable.
  2. you are connected to a user administrator account?
  3. don't you make changes on the computer before this problem?

  I suggest you install the latest printer driver and check.
  http://support.Lexmark.com/index?locale=en&ProductCode=LEXMARK_X7550&UserLocale=en_US&segment=download&OS=WINDOWS_VISTA&page=downloadsList&oslocale=en_US

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517