Office of stream PC to DMP via VLC (UDP stream)

Similar Questions

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• Where to get refund for office 2013

  I'm having this same problem.  I am running Vista.  Why he does not mention this anywhere in the download or the ordering process?  How do I get my money back?  I'm not forking out another couple hundred dollars for updating windows.  It's extremely frustrating!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/trying-to-install-Microsoft-Office-Professional/5022baba-A104-4d10-A13C-aa6c74f6c044 >

  Assuming you bought Office 2013 less then 45 days via the Windows store, start here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Return_Exchange

• Office 2003 and 2010 alongside the other

  Hello

  If I have a version thinapped of Office 2003 and Office 2010 streaming on a desk how it decides what default version to use? (i.e. when has a word of opening the document explorer), so far, I found it uses Office 2010 as a default, but I have a user that has been lacking with Office 2003.

  Kind regards

  Ross

  It depends on what ThinApp you saved. If Office 2003 is registered, the system will use Office 2003.

  If Office 2003 and Office 2010 are recorded, the last being used by the system.

• Why have my images not exported via FTP folders and other files?

  Muse new first site filled with versions of office, phone and Tablet and exported via FTP to third party host. HTML and css, but no pictures in the pictures folder?

  I discovered that some of the files were not loaded when I moved the to the root directory to enable the site.  Once I've spotted and sent them to the root directory, the problem has been resolved.

• import a .dmp file

  Hello world
  
  I'm trying to import the .dmp via the windows command prompt.
  The file size is 5.3 GB.
  When I import (using the imp command), it will automatically exit command prompt.
  I'm using Oracle 11 g.
  
  -
  Concerning
  Animesh

  Hi Anne,.

  You said that you're a .dmp file and according to the Solution of Osama you found error user name.

  I will suggest that you please open the .dmp file in command prompt and look for the default user name.
  Probably your .dmp file will have a username in there.

  Try this!

  Hope this will help you.

  Kind regards
  Jitendra

• Damaged appearing in the Office Viewer pages

  Just published a new edition of a magazine this morning and several pages are getting maimed in the Office Viewer when share us them via social media. See attached image. It only happens with smooth scrolling items. For some reason, the lower - sometimes a few lines, sometimes half of the article - is expanded and the right side is clipped. Some smooth scrolling items are not affected at all.

  See picture attached.

  Here is the link.

  The sheets have been downloaded in PDF format, but we have done since the upgrade to release 26 and have never seen it before.

  Does anyone have an idea what is happening?  We must solve this problem and soon.

  

  Steve, I talked to the members of the team of web viewer this problem of limitation of page break. They are aware of the problem and a fix put in place for v28. Sorry for the inconvenience. Creation of the 'return' of the PNG-based web viewer is the good solution at this time.

• Shoot a video on screen

  I want to rotate the content to display on screens connected to a DMP via a HDMI cable

  But I can't turn the video attached to the configuration of DPM and the image of the screen. The trick I do is 180 degrees

  When I want to rotate an image I have no problem because if you rotate the image but no video.

  Someone he won't?

  Concerning

  Aurelio

  Aurelio,

  
  

  If I understand your question, you want to play a video (VOD or Live Stream) in PORTRAIT MODE.

  If that's what you try to do it, then you can configure DPM to rotate the screen and if necessary

  create a presentation of DMD in portrait mode.  That's all you can do on the side of Cisco DMS.

  
  

  NOW, you must change the content of the source.  Needs to be turned and the videos of the images also

  you will need to be turned.  You must use a tool or an application 3 to rotate the images & videos.

  
  

  The images should be easy.  More graphic software apps for this.  The video can be a little more

  difficult, but it can be done.  I think that some people have used VLC or Adobe Premiere, etc...

  
  

  http://www.Adobe.com/products/premiere/

  http://www.videolan.org/

  
  

  I'm sure there are more out there...

  
  

  Don't forget that we play just the source of content not to touch anything...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

  I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

  I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

  PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

  I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

  Is that what I want to accomplish even possible with the ASA?

  Hi Neal,

  Yes, it's quite possible! below is a loss of things you need to do:

  (1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

  (2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

  (3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

  NAT (outside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Global 1 interface (outside)

  Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

  I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

  Let me know if it helps!

  Thank you and best regards,

  Assia

• Move the pictures to a disk folder

  Hi, is it possible (and especially a good idea) to change the location of the folder my pictures on a disc?  I get free space on a drive with my account of MS Office and backup all my files via the cloud.  Photos etc. However is not in this return upward even if they are stored on an external hard drive.

  Any advice on this would be appreciated.

  Proibably not

  So far, nobody has used successfully any cloud service - for an iPhoto or photo library backup and you certainly can't use it as your library main apartment

  Photo library must be on a local drive connected via a fast wired connection and must be in Mac OS extended (journaled) format and backup must be on the same format

  Now, this isn't a good idea

  LN

• His Cup on Satellite L750D

  First, my sound ceases to die.
  Whether on youtube, video games, or just watch a movie via VLC player, the sound just stops randomly. If I refresh the page (like YouTube), he returned for a few moments, before he dies again.

  The funny thing is, if I plug into one audio of my headphone jack, it again for a while, and then when it stops, I just unplug the unit, and it starts again.
  Go wonder?

  Current drivers:
  HDAD AMD: 7.12.0.7719
  Conexant SAMI: 8.51.1.0

  Thoughts?

  The other issue I have is with my graphic drivers.
  If I try to use the latest drivers, any game I play (tested with MOH:AA and World of Warcraft) randomly hangs my computer, so I have to do a hard reset.

  So now I'm stuck with the drivers from 2011.
  What is happening with this?

  Kind regards

  With regard to the use of drivers of graphics cards:
  I assume that you have downloaded the latest driver for AMD/ATI page?
  Is this correct?
  This GPU manufacturer drivers don t feature additional support which allows you to control the temperature of the GPU.

  I can't say for sure if the high temperature causes the problem, but it might be possible that due to the increase in temperature (temperature increases everything by playing games of high performance) the system hangs. However can the laptop freezes because of compatibility problems between the game and the driver GPU.

  That is why it s recommended to use drivers from Toshiba page even if the driver is a little older.

  With regard to the sound:
  I guess that this problem is related to the Conexant driver and could be easily resolved by upgrading the driver.
  The update can be a little tricky because the laptop is a little older, and look for driver audio Conexant out other models of laptops.

  However, I discovered that Satellite C55 - B supports also the Conexant audio driver. There is a newer version (at this time v8.65.38.50 for Win 7)

  First uninstall the old driver audio Conexant. You can do it in Device Manager.
  After removing the old driver, restart the laptop. Then, install the latest version and restart once more.
  After that, check the sound performance.

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• HP Pavilion Gaming Notebook 15: Error Message received "the operating system is not currently configured torun this application."

  Anyone happen to know what this error message is referring to, or what should I do?

  It unfortunately and it does not say aything else. There only the option to click OK that closes just the box pop up.

  Its been popping up randomly in the past several times I used the laptop. Initially I thought that it was because there was still thinking it would correct after the execution of the latter but its re-appeared again and updates to run. It does not ask respect or other options to solve the problem?

  Send a print screen but don't know how?

  I have not had this laptop of all (about 2 months) and don't expect to have problems of this kind already! Any help appreciated

  Thanks in advance

  Hello

  This problem occurs because of MS Office (tails, corruption).

  Try reinstalling Microsoft Office as follows:

  1. uninstall all MS Office applications in a standard way via Add/Remove Programs, restart.

  2. use instructions and special removal tools to remove completely all MS Office applications:

  -office 2013 or earlier version: install this tool http://download.microsoft.com/download/0/e...16a296a/ork.exe, go to start-> all programs-> Microsoft Office-> Microsoft Office Tools-> Resource Kit Microsoft Office 2003-> removal Assistant, in the Removal Wizard, select 'Comepletely remove all versions of my previous Microsoft Office application' and follow the instructions;

  -for Office 2007, 2010: http://support.microsoft.com/kb/971179

  -office 2013, 365: http://support.microsoft.com/kb/2739501/en

  3. manually remove all objects listed under:

  -C:\Program Files\Microsoft Office

  -C:\Program Files\Common Files\Microsoft Shared\OFFICE *.

  -C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE

  -C:\ProgramData\Microsoft\OFFICE

  4 restart, make sure that the problem is not reproduced more.

  5 install the necessary package of MS Office.

  By clicking the Thumbs-Up is a way to say - thank you! ******
  * Click on I accept as Solution on an answer that solves your problem to help others *.

  I am an employee of HP

  #HPExpertsday

• Desktop MacPro not close

  MacPro desktop w/OS 10.11.3.

  My office closes not fully activated manually via the menu drop-down or on timer.  I get to the screen black with an arrow I have to manually force stop using the front key.  I can't say the journalist crash which is the problem.  I guess I don't know how to read it anyway so need help.

  I asked this question a time back, but the answers do not solve the issue.  I deleted some software, tested and reinstalled same but without any positive results.  It just seems to point to a selection of software (Apple or part 3d) report I did by mistake, many hard drives used for backups or equipment failure.  I wish I knew.

  Suggestions are welcome.

  When you force close to the crash report will not help really.

  Note the time of the next frost. After stopping forced and restarted, open the Console application in the Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Look for entries before that begin with BOOT_TIME because that indicates the beginning of the start

• Windows Update is still at 0% download, MSE does not, update any problems to connect to Microsoft's servers?

  I just installed windows 7 on my laptop and my desktop computer. My laptop works 100% fine without any problem at all. However my office is struggling to download updates via both windows update and to Microsoft essentials security.

  The State of windows update is still ' Windows is downloading updates (all 0%). "and never changes.
  Microsoft security essentials tray status is 'Check updates', and when I restore the window it says "search...". ", but no progress beyond this point. The MSE has only been going on for about a day now, but the Windows update thing has happened since pretty close to the installation.
  I don't know if that helps, but initially I think downloading an update, then remained in the thing of locking system, to the "installation 1 of 4 do not unplug the computer" for 8 to 10 hours, so at that point, I had to disobey microsoft and reset the computer.
  Any help would be appreciated.

  Hello

  References to Vista also apply to Windows 7.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.