AppStack converts full Clone somewhat "non-persistent".

Similar Questions

• Linked clone, pool Non-persistent, Image update?

  Is it possible to update an image of non-persistent pool? I know it's not like a persistent pool where you can update the image, then recompose. But I thought that I might be able to go through the Wizard Setup again and choose my new snapshot and hit finish. But he has not updated one of my virtual desktops.

  Is it possible to update a non-persistent pool clone related? If so how can I go about it?

  If you point the new snapshot of the pool and then remove the existing virtual machine, it will create the new virtual machine based on the new snapshot.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Best installation of the USB driver of practices for non-persistent clones

  Hello

  are there best practices using non-persistent clones and USB driver?

  Client A connects to a linked clone and connects a drive USB flash or something else.

  The installation of the driver is horrible slow on Windows 7:

  • New device found...
  • looking for a driver in driverstore...
  • installing the driver software...

  Tested now and it took more than 8mins.

  After installation, the appliance is ready and can be used. But after disconnecting from the desktop computer updates and each driver installation must be run again at the next connection. We have disabled the Windows updates and specified do not search Windows Update for device driver locations. (Policies-> models-> system administration / Installation of devices-> search order specified for the device driver source locations).

  Clues, why it is so slowly installing drivers and how to prevent the reinstallation of drivers every day

  Thank you and best regards

  Well,.

  We have set. VA was the problem...

  We excluded analyzes the demand for processes drvinst.exe.

  Thank you

• How to enable the redirection of disposable files to 'redirect available on a non-persistent disk files "?

  Hey you,.

  I have a floating pool using View Composer linked clones

  with disposable files Redirection is "do not redirect disposable files", I can

  switch forwarding files disposable to "redirect the disposable files to one.

  non-persistent disk "?  . If it is possible, how

  to do?

  Thank you.

  -

  ---

  Blog to the Viet Nam virtualization technology

  http://congngheaohoa.blogspot.com

  Available disk options cannot be set during the installation of the pool.  If you have an existing pool that has not activated it then I think you need to create a new pool.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Problem backup files of MS Office 2007 to the network share on non-persistent pool

  I use ThinApp to load MS Office 2007 in a non-persistent pool. Whenever I try to save an Office file to a network share start installation of the application. It takes a lot of time. Any ideas on that?

  Thank you

  Sheph003

  Are you sure that the last-born is a factor here?  It seems more that you have not properly packaged.  Have you tried the same operation of the master image?  To avoid problems, the best way to package the ThinApp is using the same basic build vm that you use for your link clones but without all the apps still installed i.e. windows Basic.

  For example I have 2 images - 1 is Windows XP only, the 2nd is a progression of this image with installed software that becomes the parent.  Thinapps are packed on a copy of the image 1 running on VM Workstation.  I know that my image of parent and ThinApp image have the same windows build due to the process, I followed.

  I don't see what last-born can have no effect on your problem?

• accept guests of Java security in Firefox on non-persistent desktops view

  Hi all

  Here's our environment...

  1. view 6.1

  2. a pool Nopersistent offices Windows 7 Enterprise

  3 Java 32 bits version 8 day 72

  4 Firefox 34.0.5

  Run us a Java Application (banner) and when you fire in Firefox it shows 2 application prompt, both applications are trusted publishers is not a matter of trust. Because they are non-persistent desktops that our end users bring each time that they restart it. Whats odd is that we have been able to ignore these warnings with IE using strategies of group two, one to be saved in the "trusted publishers" request certificates store and another to add the URL of the application to IE Trusted Sites. I'm not sure how to work around this problem in Firefox

  I enable the Java Console and turned on a high level of forest exploitation, and when I got one of these application guests I clicked on the option "don't show this new editor applications and the location above. When I did that the Java console displays the following...

  Security: the user granted the privileges to the code forever

  Security: deployment of C:\Users\deptsfs\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs loading certificates

  Security: responsible for deployment from C:\Users\deptsfs\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs certificates

  Security: registration of certificates of deployment in C:\Users\deptsfs\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs

  Security: safe deployment in C:\Users\deptsfs\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs certificates

  I know I'm grabbing at straws here but y at - he called a way to manipulate the contents of the file "trusted.certs" to the user with a logon script via group policy so that Publisher/App/location is always approved?

  Thank you

  So... my grad last idea is to deploy the trusted.certs file in the default profile on your master image and test to see if this file is available in-house for new users. Do you know how to copy a user profile in the default user profile in Windows 7?

• Any way to get the files (not apps) for non-persistent floating desktop?

  Hello:

  We are currently running a pilot to replace our training labs, with the offices of pool floating non-persistent.  Currently, we are trying to find a way to simply deploy a file folder in the end user's desktop folder.  I tried to watch using Thinapp, but that seems to work only if there are executable files.  In our case, we just have a folder of files Excel & Word we want to have on every desk in the pool.  Is it possible to do, without having to use a part 3?  I was looking at possible ways to do it, but so far I only found ways to do it with the Windows user profile.  It is an option, but we would like to do this at the level of the office pool instead.  Basically, just like Thinapp works but just copy or synchronize files rather that install applications.

  I was wondering if anyone else has found a way to do it.  Thanks in advance.

  I would probably put the files in the image as the 2nd post mentioned. Another option would be to use some kind of startup script to copy from a network share. Have you looked at the volumes app?

• Problem automated creation of the pools (linked clone or full clone)

  Hi all!

  Two or three weeks ago I started to experience a very strange error in my environment. (vCenter and vSphere Horizon are version 6.x)

  At the point where I'm trying to create a pool automated , using of linked clone or a full clone, the following error is displayed as follows:

  «The selected snapshot is hardware version 7.» Only ESX 4.0 hosts or homogenous groups of hosts running ESX 4.0 can be selected. »

  
  

  I know that there is a KB ( ) 1028489) reported this error, but it is applied to view 4.X and I'm running the version 6

  
  

  I first thought it was on an old parent VMs and instant, so I created all parents of virtual machines and snapshot material the most recent help of virtual machine. But the error still there.

  
  

  Is there any type of troubleshooting for this problem?

  
  

  Ideas are very much aprecciated.
  

  
  

  Thank you.

  
  

  Best,

  Eduardo.
  

  
  

  
  

  Solved!

  Permissions. In fact, the role attributed to view user.

  Best.

  Thank you

  Eduardo.

• Linked clone saves space as comapred to the full clones

  I read somewhere that linked clone in VMware View lets you save 90% of storage compared to full clone.

  Could someone help me to explain how linked clones created using VMware view lets you save 90% of storage compared to full clones?

  Also there is a difference between a cloned VM from vcenter for VDI full clone created using VMware View?

  Delta-disk is not 40 GB, it starts with a few hundred MB:s and will increase when it is used for a maximum of 40 GB.

  It may present as its 40 GB when looked at in the vSphere Client, but if you look at the actual file you can see that its much smaller.

  Linjo

• Host system logs are stored on non-persistent storage

  After the upgrade of a crowd of ESX4.0 at ESXi5.5, I get 'host system logs are stored on non-persistent storage. I've now changed the location of the log of a shared data store. What happens if this datasore is offline due to a mistake or an interview?

  you will get the error like "" /var/log/.vmssyslogd.err: unable to write the newspaper "that's all." then you will have loss the logs after this time. in order to configure it in drive clean. FYI: this always used to use diagnostic logs, it is important

• Client workspace in a pool of non-persistent offices?

  The customer of the workspace can be used in a non-persistent office pool? A couple of concerns I have with this:

  -l the location of the data cache. I don't want to synchronize whenever I log on a fresh desktop computer. I can change the path to a shared House on the network for example, but is it possible during installation or via GPO?

  -When a user opens a session one computer desktop with a client of the workspace, the office is bound to the user in the workspace of Horizon. This obviously gives problems when a user opens a session to a new non-persistent desktop whenever the user opens a session. Desktop computers will be linked to multiple users and users will have several related jobs. How can this problem be solved?

  It can, but it is not optimized for this use case right now...

  In Horizon 1.0 data will have sync if you install the Agent Horizon on a VDI desktop. No way around that. So at least synchronize only once file, you can redirect the data folder of the 'local' Horizon to a network share or a persistent disk. There is a registry key for this:

  HCCU\Software\VMware, Inc. \Horizon Data\Folder (Reg_SZ) = a folder on a mapped drive, such as a home player or something else that is persistent.

  There should be no problem with that connects several computers. You are right, there is a long list of features, but there is no limitation, so everything should work.

  We are working on many improvements for future versions. This kind of feedback is crucial to decide what features will be implemented when. Please, keep the feedback coming.

• Workstation 8; cannot resize the disk on the full clone

  I have a related clone I want to create a complete clone so that I can expand the virtual hard disk.  But after I created the full clone and try to use the indicator Workstation 8 utility I have an error message: "You can't develop this virtual disk because it is a linked clone."  I tried this three times, with great attention the last two times to read all dialog boxes to make sure I'm not a mistake, but the same error comes back every time.

  Here are the steps I go through:

  (1) turn off the linked clone

  (2) delete all snapshots for the linked clone

  (3) file-> open-> choose the clone of linke

  (4) VM-> manage-> Clone - to pen the Clone Virtual Machine Wizard. in the wizard:

  (5) "The current state of the virtual machine" pick (I tried as long as and create a snapshot and try to clone from that)

  (6) select "CREATE FULL CLONE' (not ' create a linked clone)

  (7) name the new complete cloned machine, and then click on finish

  After about 10-15 minutes, I get a message indicates the complete clone is finished.  I then close VMware, open it back up, open the new full clone that I created and select chose to: edit virtual machine settings-> tab-> click on the hard drive to extend hardware-> utilities-> Expand.  The error box I mentioned above pop and 8 workstations does not indicator the hard drive.and error as described above.

  Am I missing something here?

  If you can confirm the virtual disk of the new virtual machine is not a Flash disk (i.e. with 00000x.vmdk in its name) and the vmware.log file (created after you turn on the virtual machine) shows not all other hard files, you can check if the .vmsd of the virtual machine file contains incorrect entries. Essentially - after making sure that no other hard files are used - you could just delete the .vmsd file.

  André

• See 5 full Clone dedicated - cannot designate OR AD

  When you create a new pool of dedicated full clones, we are unable to specify the unit of ORGANIZATION AD to place computers newly commissioned.  By default, only they are placed in the OU = computers container.  The deployment of linked clones, you can specify the ORGANIZATIONAL unit tab customization.  However, this option is not available when configuring your desktop full clone.

  Does anyone have an aronds work for this?  Are there other options to achieve this by using SYSPREP?  If so, any suggestions would be appreciated.

  Very old thread that can be useful, http://communities.vmware.com/message/959184#959184.   It deals with the use of DSMOVE.exe to select an ORGANIZATIONAL unit of the machine.

• Independent persistent independent vs Non-persistent

  Hello

  Is there someone who can explain to me independent independent persistent vs. Non-Persistent.

  * It is very clear that changes are undone if you turn off the VM.* (or a virtual machine shutdown)

  Restart the virtual machine or VM reset differs from the power off and stop. Maybe you have installed something and he needs a reboot and after the reboot if the machine do not have these things, there is no use of this feature.

  I worked on disc not intentionally and its great.

  Try turning off the POWER or stop the virtual machine and see the habit of these files to be there.

  Consider tender point for the useful and correct answer by clicking on the tab

• How to convert PDF file to non-fillable PDF?

  I need to convert PDF into a non-fillable pdf file on the screen.  How do I do that?

  Hi Schulzelaw,

  Open the PDF in Adobe Acrobat. Click file > print > select Adobe PDF as the printer.

  The document will get flattened and you get a non-fillable PDF

  Kind regards

  Ajlan Huda