Best installation of the USB driver of practices for non-persistent clones

Similar Questions

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.

• Unable to start after the installation of the printer driver

  I have a dell with vista 32 pc I recently replaced a broken with an identical printer printer, but what either the reason society printer when sending to the printer installation instructions sent replacement and this includes reinstalling the driver for the printer, so I followed the directions to reinstall the driver. After all, the n is the desired computer restart, so it was the case, but OS could not open sent me to a silicone black white screen saying there was a problem with windows and does not, and I could launch a system repair or start windows normally. well repair luanching systems but it won't do anything at all and when you try to start normally it's just a black screen with a white bow doubled by a green line through it and now he used to statrt al all? can u help please

  original title: Please help__

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• How to download an application on the USB drive and install it then from there?

  I want to download an app from itunes store from a windows computer, save on the USB drive and then install on my iPad. Please gibve me a hint weather it is possible. Thank you!

  No, it isn't. Live or through iTunes only.

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Installation of the graphics driver working only not on Satellite C640

  I have the Satellite C640. While I was downloading the drivers, installation of the graphics driver does not work.
  My resolution is also maximize up to 1022 X 768, where, as it should be 1366 X 768.

  If anyone can help me solve this problem?

  Hello

  First of all, I would be nice to know some basic details:
  -What C640-xxx you have exactly?
  -What Windows operating system you are using?
  -Do you use with OS preinstalled by Toshiba?
  -Have what graphics driver you tried to install (from Toshiba or other pages?)

  Satellite C640 was equipped with different graphics chips; Intel, ATI and nVidia did you try to install the correct driver?

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Problems with the installation of the graphics driver

  Hello! I need help with the installation of the graphics driver on Pavilion g7 - 1078sr, win7 - x 86. After installing the driver Intel turbo boost technology (sp55027, downloaded here) in Device Manager, in videoadapters I still see Standart VGA graphics adapt (VEN_8086 & DEV_0046 = core i3 integrated video) instead of the Intel HD. Why the drivers are not installed?

  And the second problem. Installation of driver (sp55025) graph says ati is everything is OK, but I can't launch control center and I don't see my graphics card in the list of devices, I only see standard adapters. (.net framework 4.0 installed)  Here is the screenshot of the http://s011.radikal.ru/i317/1206/e3/0de594a696ab.png disorder

  Help me please, cause I can't use my laptop normally. It is an abnormal situation with drivers.

  Hello

  Try to download and install the following drivers.

  First, open windows control panel, open programs and features, Intel Turbo Boost Technology driver right click and select uninstall - when it is finished, restart the laptop.

  Then, download and reinstall the Chipset driver on the following link.

  Driver Chipset.

  After this Setup is complete, restart the laptop.

  When windows has reloaded, download and install the driver from the link below.

  ATI/Intel Installer.

  Again, once the installation is complete, reboot the laptop and check.

  Kind regards

  DP - K

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• Cannot connect Nokia Lumia get one error "MTP Device doesn't have the USB Driver Installation.

  I tried to connect my new Nokia Lumia 920 to my PC and get the error message in my title.  After a repair, always get a message "USB MTP currency has a driver problem".  Tried same thing FixIt. Reinstalled driver always get the same message.  Someone at - it solve this problem?  I have a 64-bit Windows 7 computer.

  If you have solved it is already very good.
  otherwise this can work, because it worked for me :)
  Disconnect your usb phone, then turn off your phone and then plug the USB on the computer and then wait just the phone for start up and wait for about 5 min or so, initially, he could tell not to settle because the phone have not started upward again probably, but it should work after your phone go in it the home screen.
  If this does not work I do not know haha
  thing seems to work when you turn off and turn back on haha

• Automatic installation of the RNDIS driver

  Hello

  Why when you connect a Linux USB Ethernet Gadget for Windows 7/8, and perhaps others, Windows does not install the driver automatically?

  The driver is already on the hard drive and Windows knows the DEVICE class. Should be simple. Am I missing something?

  Best regards

  Ulrich

  Hello

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  Windows uses information files (INF) the installation program to install the following components for a device: one or several drivers that support the device.

  INFs

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff547402 (v = vs. 85) .aspx

  To use the Remote NDIS driver with a USB device, you need a file INF. see this Microsoft article.

  Remote NDIS INF model

  http://msdn.Microsoft.com/en-us/library/ff570620.aspx

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• Installation of the USB - no scanner detected by the software

  I bought Microtec USB scanner ScanMaker6100 but cannot begin to work with it:)

  Recognize the scanner as a Plug & Play device my PC and install it but the software can't find it.

  I tried to scan on another PC to check and it works so I have problem with my TOSHIBA A60?

  I had send my PC profile to support of Microtec and they suggest the following:
  "your installation of USB needs chipset driver. Currently, he works in "universal". Unmanned correct install cannot USB chipsets support entirely. Normally you have the computer driver MB CD when you buy the computer. »

  My USB controllers in Device Manager are installed like:
  Standard enhanced PCI to USB Host Controller
  Standard openHCD USB host controller
  In devices, I see they are ATI SB200 - USB Controller and ATI SB200 - USB 2.0 Controller.

  I really should reinstall / update my USB driver? How? Where can I get these drivers?

  [Edited by: admin July 16 05 12:34]

  Hello

  I don't think you need to install or update the USB drivers. If the scanner is properly installed and recognized there must be another problem. In my opinion, you should try to use the scanner with another program. As far as I know, you can also use Microsoft word and try to import image from a scanner. If Office is installed on your device, try to import something in the word document.

  Good bye

• update the USB driver

  I have updated to service pack 3 and the need to update my USB driver but cannot find an update for Windows XP.

  The drivers of USB ports are "integrated" XP with installation of XP Service Pack 1 / 2 (?), which is automatically part of Service Pack 3.