Similar Questions

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?  I can't open spotify after it has been installed, said "could not open application because PowerPC applications are no l

  I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

  I can't open spotify after it has been installed, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

  Thank you!

  PowerPC applications have not been supported for many years now since, OS X 10.7.x, you need to look for an alternative to this app or contact the developers of Spotify to see if they have a version for El Capitan 10.11.x

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning

• I have connected my iphone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  Your question has already been answered twice. Asking again will not change the answer.

• I have connected my phone to itunes and it asked if I want to spend yesterday I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g yesterday to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  This is because your phone has been hacked to unlock illegally. Update caused it to relock the initial carrier. Only the carrier so that it is locked can authorize to release.

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• straight Arab support left in adobe 2015.5

  Hello

  When I used to install cc 2015 or less that I had to chose if my illustrator or photoshop supports Arabic

  with the automatic installation in the new version I can't do that

  I try to see the active Indo-Aryan option in illustrator and try to police from right to left

  the words are fine, but brands are going crazy

  in older versions 2015 when I install it Arab support, I had this tool

  

  Orientation of the paragraphs from right to left

  This solves the problem

  but in the new version, I can't find this icon! Help, please

  alllllll another option I tried I just need to find this icon in the new version

  You must change the preferences in the Application of CC Office to support Arabic language and install it and more.

• Prepare a document to insert a row that contains the Blob column. Is what sense this correct?

  When we prepare the statement to insert a row that contains the Blob column. Is what sense this correct? And what is the difference? Does anyone know?

  1 Preparestatement.setBlob(parameter number, blob type object)

  2 Preparestatement.setBlob(parameter number, inputstream type object)

  This link shows the test I did.

  https://community.Oracle.com/thread/3680185?SR=Inbox & customTheme = OTN

  When we prepare the statement to insert a row that contains the Blob column. Is what sense this correct? And what is the difference? Anyone know?

  1 Preparestatement.setBlob(parameter number, blob type object)

  2 Preparestatement.setBlob(parameter number, inputstream type object)

  I answered in your other thread and provided a link to the JDBC Dev Guide section, which explains how to work with type LOB and BFILE data.

  Have you read this article from doc?

  Did you read my response to your other thread?

  In java, a BLOB is just the index that gives you access to the content. In your case, you access by selecting a locator BLOB existing and getting his inputstream. This inputstream is what allows you to access the content real blob.

  The Locator is just that; It specifies the LOCATION of the blob content, but NOT the content.

• I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

  I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• CS6 used on PC, it crashed, now trying to download for MAC and received the message that I use a platform that does support.  What does that mean?

  Have had creative cloud on my PC, but it crashed, so I am trying to download the program on my MacBook, but the message said Im using a platform that does not support.  What does it mean and what do I do next?

  Hello

  Because you bought windows CS6, you will not be able to install on a Mac.

  For the change of platform, see:-a product for another language or version of trading platform

  Hope this helps!

• I am trying to download Photoshop and that is, I am under an operating system that photoshop no longer supports. What should I do about it? Thank you.

  I am trying to download Photoshop and that is, I am under an operating system that photoshop no longer supports. What should I do about it? Thank you.

  Hello

  Please see system requirements | Photoshop

  Hope that helps!

  Kind regards

  Sheena

• Android Adobe Reader - Arab support

  Android Adobe Reader - Arab support

  Dear support,

  I am trying to reach the developer for a long time, but the provided e-mail is a mailing list that no one else has the right to publish, to her, except their team.

  
  

  There is a big problem with the Arabic words to search in Arabic PDF with adobe Reader for android. To search for a Word, I write the words backwards, as instead of "Adobe", I write 'ebodA' but in Arabic. I know that your app developers are Indians, but please leave an Arab person show you how he can't look up a word in the Arabic PDF file. Please repair emergency. It is very important for the readers of Arabic language. Thank you for your action.

  Link of the software:

  Adobe Reader - Android applications on Google game

  Best regards

  Kamal Darwish

  Google 234234 game developer

  Hi Kamal,

  Please do not hesitate to submit your request via this forum: community: Acrobat feature requests | Adobe Community

  Best,

  Sara

• Support Assistant: what is the ' task to resign the ghost? "

  I was in the Task Scheduler and seen this task "Ghost resign Task" which runs every hour. What is it?

  Hello

  Thank you for this informtion.

  This more with a colleague, that would cause by another process on the computer (I would not be able to say that, without looking at the computer).

  To compare, when there is something in the Windows registry that has no value and is usually represented with 0, we who would call a "ghost key" in the registry. What you see is essentially the same, but a "ghost task." It does nothing useful or harmful to the computer, to the extent that I could find.

  You can try to follow the process, though, as it should appear in the Manager of tasks under the "processes" as "ghost resign task" (or something similar), if you see that and do a right click on it then choose "instead of opening the file", this will take you to the specific file that is causing the task to run. From here, you can choose to let the task or terminate, this depend on the program by running it.

  I hope in a way that makes sense and provides you with the information you're looking for.

  Thanks for your reply.

• NJR, I have installed connectify on mn pc connection sharing software 2000 computer hp laptop, but it displays a yellow triangle with AP not supported. What do I do?

  Hi I have installed connectify on mn pc connection sharing software 2000 computer hp laptop, but it shows me a yellow triangle with Ap not supported, what to do?

  Hello

  You asked your question in the text of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  Thank you.