Are 3 TB hard drives, more likely to fail earlier that say a 2 TB

Similar Questions

• After changing hard drives, I get an error message that says: I need a full version disc windows genuine

  Original title: replacement hard drive configuration issue

  My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?

  Thank you

  Jeff

  Hello

  Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:

  http://support.Microsoft.com/kb/950929

  See also: http://support.microsoft.com/kb/811224

• Hard Drive short DST check failed

  FAILURE ID: 9TXMAW-7RH88Q-XD7WMF-60RN03

  Whenever the hard drive test short DST fails indicating that the hard drive has failed and which needs to be replaced to solve the problem

  This problem could be due to an Application or a driver conflict, virus issues, corruptions of files due to incompatible applications, incorrect judgments, update failures due to conflicts, mounted sudden power so portable, sudden falls etc...

  HP will offer a replacement HDD if the laptop warranty is Active, otherwise you can buy a SATA hard drive in a nearby retail store

  Please make sure that you get at least equal as long as the original one in order to use recovery disks. If you need you can buy a bigger, but not smaller hard drive capacity. For example, if you have a 500 GB hard drive you can improve it to 750 GB hard drive, but not 320 GB hard drive

  Please try the troubleshooting below indicated once the steps:

  Step 01. Remove the battery and unplug the power adapter AC.

  Step 02. Press and hold the power button for more than 30 seconds

  Step 03. Plug the AC power adapter / (leave the battery for now)

  Step 04. Press the power button and check if the unit is operating normally

  If the steps listed above is not enough, then you can try reinstalling the hard disk on your laptop

  If the problem persists again please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and provide recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support)

  Note: Back up all personal data on an external drive if possible. Otherwise, you can connect the faulty HDD through SATA USB adapter with another PC or a PC even after replacing the drive HARD and reinstall the operating system and try to copy / retrieve files. You can also check out the link below for additional help

  http://www.WikiHow.com/recover-data-from-the-hard-drive-of-a-dead-laptop

  Please click on the link in order to identify, prevent, diagnose, and recover failures Drive on HP Portable Hard Drives & Solid State Drives:

  http://h10032.www1.HP.com/CTG/manual/c02876562.PDF

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Windows 7 reports not true after install a hard drive more in PC

  I have a valid and legal copy of win7 ultimate that I bought new in box. I installed and activated on my PC, I want to install a hard drive more in my PC. I put in the new drive and proceed with the installation of my win7 ultimate all goes well until I try to activate windows and told me my copy is not valid. WTF? am I expected to buy windows again just because I want a bigger hard drive?

  More commonly called a charger, it's tool a hacker used to force acceptance of a product key and bypass Activation and Validation of requirements.

  His presence automatically makes any non-genuine when system discovered.

• Hard drive DST short test failed

  My HP Pavilion dv6-6c35dx laptop computer fails to load Windows. I ran diagnostics and got a quick access error (303). HP UEFI Diagnostics for hard drive failed the DST short test with failure code MBX47F 0006QU PXGK01 QT 60 03. Does this mean I need to replace my hard drive? Product ID of my laptop is A6Y53UAR #ABA and I have Win7-64 installed on it.

  Thank you

  Claudine

  Hello

  Your laptop is listed as coming with a HARD drive from 640 GB, but given that there is little difference in cost, you can replace this with a 750 GB option.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 64 of your maintenance & Service Guide.

  ***************************************************************

  Regarding the reinstallation of the operating system, you can create your own installer of Windows 7 USB drive flash as follows.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below--these Images are of a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Once completed, use the Microsoft Tool on the following link to create a USB bootable Windows 7 installer - you will need a 4 GB flash for this drive.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the Windows 7 flash player.  Select the Boot Options menu (usually f9).  Use the arrow keys to select the flash drive and press ENTER.

  If your laptop will boot from it, use the flash player to perform the installation, enter the activation key for Windows on the label of the COA in the request and once the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without the software load extra normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• Satellite L750 - receive messages from ordinary this HARD drive is about to fail

  I have a laptop of PSK2YA - 04K 010 L750 Satellite.
  I get regular messages that my hard drive is about to fail.
  I backed up all my important stuff.
  I did not the recovery discs until I started getting these messages.
  I've been able to create a windows repair disc & also recorded an image of the hard drive on an external hard drive with no problem.

  I bought and installed a Western Digital 750Go WD7500BPKT hard drive replacement.
  I tried to do a system restore using the image I created on my external hard drive
  "I get the following message appears a few seconds after the start of the reimage" the operation failed because of a device error encountered with the source or the destination. (0x8078012D)

  I reassembled the original hard drive & make a set 4 DVD discs using the Toshiba Recovery shortcut.
  I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.
  Don't really know where to go now & am hoping to get a few ideas from people in the know or have been here before.

  HHHHeelp please

  > I tried to do a system recovery using the image I created on my external hard drive

  How did you create this image?

  > I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.

  It looks like the 2nd disc can be read correctly or the 2nd disc was not created correctly.

  I first recommend you to clean the lens of the laser of the reader of CD/DVD alcohol or cotton tip.
  Then try to run the installation by using the recovery disk once more.
  In case this isn't possible, your recovery disk is defective.

  If the recovery disk that is faulty, you have an option to order here:
  http://backupmedia.Toshiba.EU/landing.aspx

  The 2nd option would be clean Microsoft Windows disk usage.
  Missing drivers may be downloaded from the Toshiba UE driver page.

• I removed my xp hard drive to another computer and now it says I need to 'enable '.

  http://support.Microsoft.com/kb/950929/en-us

  I removed my xp hard drive to another computer and now it says that I have to 'activate' and when I try, I get a weird response and they all but hang up on me.  I used this drive for many years, even the screen shows a picture of my table with flowers in a vase.  What is going on?  How can I get this problem?

  Your hard drive, installed on a computer with Windows XP was preinstalled by the computer manufacturer? If this is the case, then you have a "OEM version" of Windows which is linked to the computer first it is installed on and cannot be moved or reinstalled on another computer.

  If however you have a "Commercial" of XP version that you bought in a store, then you should be able to activate by phone, be aware that move the drive from one computer to another is more often go to work and XP may have problems (device drivers and other issues). The best solution is a clean installation (after you back up your data files).

  ==============================================

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• As I was deleting some files from my hard drive, I came across some files that I couldn't remove with a message saying remove wite protection.

  As I was deleting some files from my hard drive, I came across some files that I couldn't remove with a message saying remove wite protection. Help!

  This error indicates that an application is using this file at this point here. If you are unable to remove it, restart your computer and then try to delete it.

  IF YOU ARE NOT SUCCESSFUL WITH THE above METHOD, THEN TRY to USE UNLOCKER, a free application that disables the application using the file that you want to delete.
  Download unlocker from here-http://www.filehippo.com/download_unlocker/
  Click on the above link and click on download the newer version on the right side of the screen.
  Download UNLOCKER from the link given above and install it. (you may need to restart the computer)
  Right-click on the file you want to delete, and then click unlocker.
  A new window opens showing all applications using this file.
  Select all files, and then click on unblock.
  Now right-click on the file you want to delete, and then click on remove.
  YOUR FILE WILL BE DELETED SUCCESSFULLY.
  If you are still unable to delete that file and unlocker shows no application, then follow these steps-
  Right-click on the file you want to delete and click unlocker.
  A small window will appear.
  In the drop-down list, choose delete, and then click ok.
  Your file will be deleted on the next reboot of the system.

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• Loss of change data and the markup for the photos moved originals on external hard drive. How can I get that back?

  I transferred the originals to an external hard drive to free up space on my hard drive.  After doing this, all that I had done some missing photos, as well as all the indicators I used.

  Is it possible to get this back?

  Hi Samuel,

  You have an exclamation point on the images in Lightroom?

  If so please click on the following link: the help of Adobe Photoshop Lightroom | Locate missing photos

  Have you moved the images in Lightroom or out of Lightroom?

  Are you sure you're in the right catalog?

  Concerning

  Sarika

• I want to save video projects in 13 items to locations on my hard drive. How do I do that?

  I want to save video projects in 13 items to locations on my hard drive. How do I do that?

  pweman

  What is the associated operating system your 13 items first? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  For now, I will assume first elements 13/13.1 on Windows 7, 8, 8.1, or 10 64-bit.

  I'll answer as you asked, regarding registration of project files first elements 13/13.1 to a custom location instead of the default Documents, Adobe, first, 13 items, 0.

  1. open a new project working space Expert, go to Menu/save as, name the project, and set the location save in.

  or

  2. open a new project in the workspace Expert, go to file Menu/New/Project and the new project dialog box, which allows you to set a location record in custom for the file project as the project name. Here, you can change the settings to manually set the predefined project if the project is do not do it correctly based on his analysis of the properties of the first file slipped to its timeline.

  Just in case, see Edit Menu/preferences/Scratch disks which you can set with the same name as the project.

  Adobe Premiere Elements help. Working with "scratch disks"

  Just in case, consider pointing each project and record assets at its own folder to your location record in. This will make it easier when you decide to don't want don't not project any longer.

  If by chance, you should ask on the registration of exports from the project, please see the location record in the area of export settings.

  Please review and consider. Any questions, feel free to ask.

  Thank you.

  RTA

• Pavilion 2206TX: hard drive DST short test failed

  Hard drive DST short test failed.

  For a few days, my laptop is not starting.

  Run the diagnostics showed "hard drive DST short test failed.

  I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

  I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

  Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

  Help, please.

  Hello
  
  Yes, you can use your friend recovery media in your. It should work.
  
  I'm not able to find a recovery media for your model of third-party vendors too.
  
  No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.
  
  Concerning
  
  Visruth

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I thought about it! I went into the plug ins on Chrome and changed a setting. Thank you!

  Marie Larsen

  Real estate capital

  801-597-9926-cell

  [email protected]

  http://www.marielarsenrealtor.com/> www.marielarsenrealtor.com

  'f' Logo Marie Larsen-Equity real estate

  https://g.twimg.com/Twitter_logo_blue.PNG Marie_Realtor

• When RAW images are needed (if it is stored on the hard drive more slow)?

  I just bought an SSD that will roughly triple my reading speed, but since it's only 160 GB I'cant afford the luxury to keep all my data on it.

  I know there are many threads here about the best hard drive configurations, but just how would keeping that data (files 12 megapixel CR2) RAW affect my LR experience (once 1:1 previews have been returned and stored on the ssd)?

  For example, refinement of development would be insensitive?

  Robert Karlsson

  I'd do it but the LRcat previews and hides on the disc and the actual image on a standard disk performance files. Treatment you just write on the disc were the images are found when you save the changes to the files xmp either external or internall and only this disk reads when generating previews, so the actual performance increase will come from the LRcat and previews being on the disc fast and if space is at a premium (as it will be of course with only 160 GB to play with.

  If you were really organized could import the images particual group, work on the SSD and when you are done move elsewhere... but the time required to do this can defeat the purpose. Try a few game different ups and let us know how it goes as I can consider buying a small SSD if it does not give improvements.