When RAW images are needed (if it is stored on the hard drive more slow)?

Similar Questions

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• How to create the image that was stored on the HARD drive

  Hello

  When I fixed my windows, I chose "Restore Factory Setting" options.
  This happens to reformat my hard drive and I lose the "TOSHIBA HDD Recovery" image.

  Is it possible to create this image again?

  Thanks in advance for your help.

  Hello

  The use of the Toshiba HDD image would format the HARD drive, but should not remove the Toshiba HDD image files that are stored on the second partition!
  That's why I put t know why you said you lost the image of Toshiba HDD.
  That is a little strange.

  On the other hand, you can try to create the recovery disk using tool of preinstalled Toshiba Toshiba recovery disc Creator called.
  This tool helps you to create the recovery disk using Toshiba image files stored on the second partition.
  I think you should try this.

  See you soon

• Lightroom uses a library, or are files stored on the hard drive?

  So, Lightroom uses a librbary to store photos and any changes made, or it updates the disk image files?

  I had a Mac in the summer, but subsequently discovered that software Mac (iPhoto & Apperture) stores the images in a library owner rather than update the JPEG files on the hard drive. This makes it useless to me because I need to share files with Windows PCs, which means all the work done on the Mac it is lost (I know that I can export all images changed individually, but it is unfeasable). The lock-in Mac means also the backups are useless, because you need a Mac to read in the library of Apperture saved.

  While hoping that Lightroom is easier to use and allows you to share images on the platforms.

  Thank you.

  Or you can export the complete catalogue on an external drive and place it between the computers.  The catalog file is on the external hard drive, and all you have to do is double-click on it.

• Satellite L650-11F: where are the backup information stored on the HARD drive

  Hello.

  My original Toshiba HDD is a failure and I had to replace it with a new one. I haven't had any recovery DVDs until Windows stopped booting and try to avoid buying one.

  I thought that I copy just my recovery Partition and the master boot record on the new HARD drive which worked well. However I find that this hidden restore partition has only 400 MB and so cannot possibly contain all the necessary information to restore the system.

  I have boot from it, but I don't get any options to restore the default settings. It scans only for problems with Windows, runs a few tests on my records and presents me with advanced options that I can't go because I'm not connected.

  I went searching all about and know that ELSEWHERE THE PARTITION RECOVERY that you still need your Windows partition for recovery work.

  It seems just really stupid because most people will try to restore their default values after damage to their windows (deleted files accidentally or whatever).

  What is the point of keeping a partition hidden with just enough to Prime the system, but then require that certain parts of their partition original windows remains intact in order to restore?

  What I'm trying to know is exactelly what part (files) do I need to restore my computer. I tried to copy the Windows partition on the new disk but its too damaged and he'll take it apart if I try to copy some files or to copy directly (using linux dd or ddrescue).

  I am able to copy some of the unique files, so with little chance I might be able to copy everything that I need. I can't copy the part of the Windows folder however.

  So any1 know where the backup information is stored or has other ideas?

  Thank you in advance and please excuse my bad English.

  Hello

  At first, I must say that your biggest mistake was not not to create recovery discs. With these discs you didn t now have a stupid problem.
  Anyway, in my opinion, only option for you is now buy original Toshiba Recovery disk and install Recovery on the new HARD disk image.

  I put t know how to start the discussion with you and try to offer some answers. Is Toshiba doesn t create recovery CD/DVDs more and original recovery image is saved on the HARD drive. At first he was saved on the second partition of HARD drive and visible for laptop owners. Many people have deleted and do some experiments with these files for recovery. Later after the screwing up of most of them wondered why the recovery installation doesn t work anymore and blaming Toshiba for non-working HARD drive recovery facility.

  You need to just check this forum and see how many comments you can find here all this.

  I think that was the reason why Toshiba has decided to save this image on a hidden partition to avoid such things. Please note that this image of hidden recovery is designed for your laptop only and can be used if your laptop has the factory settings. Any type of change may result with missing option to start the installation of HARD drive recovery.

  Problem is that people don't read the operating manuals and don t understand how it works. To avoid any situation where the installation of the HARD disk can't start or failure HARD disk Toshiba strictly recommended recovery DVD creation. I m wondering really you didn't create these disks.

  At this point, I would like to repeat what I think: you will not be able to do anything, except by using the original installation disc of recovery. To be honest, it is cheap and costs 30 euros. Don t waste your time to play, buy, install the OS, and be happy.

  Bye and good luck

• How recover chat room files that are stored on the hard drive of computors

  every thing typed & received are stored on a computor... How can you retrieve and read?

  all conversations of chat room that are typed etc, sre, stored on a hard drive of computors? I guess it's okay.

  I am wanting to know how to recover these log files. the operating system is vista, note that if his notebook or Notepad, which is the program used for cat.

  The social site is pof (lots of fish)

  any help would be appreciated

  Thank you

  Kellie has

  Hi Kellie,

  Save chat on the computer logs depends on the way chat application is set up and if this app provides an option to change these settings.

  I would say to contact a lot of fish support and check if it helps.
  http://www.POF.com/faq_chat.aspx
   

• What is the path to find where PES 9 data are stored on the hard drive?

  I can't find where the hotos are stored on drive "C" on my PC. I went to the program data > Adobe > 9.0 but can't seem to find the data. Where are these data? I use Windows 7 64-bit. Thanks in advance for your help.

  Dick

  Photos are stored on your hard drive, wherever you put them. PES them don't move unless you tell PSE to do. If you open the organizer and then right-click on the picture and select view properties, it should tell you the directory and the name of your photo.

• Do need me an adapter to replace the hard drive with an SSD

  I want to know before I get out my drive if I need adapter to replace my old hard drive with a drive way SSD SSD drive to connect directly to a MacBook pro six, one?  Or do I need an adapter for the interface on the SSD

  SATA SSD have the same footprint than conventional hard drives (some may be thinner than 2 mm, but the closing screws are adjusted for difference) Although adapters can be provided, you must not use in your MBP.  I installed three SSD in my Mac without adapters.

  Ciao.

• Lightroom will install the catalog in C:, but I need another path for installation because the hard drive c: is an SSD, it is to small for the pictures and the catalogue lightroom. How how to install lightroom on a different HARD drive?

  I need help with installation of lightroom 5 on a HARD drive, for the start of the SSD is to small for the catalog and images. Please can anyone help with information. There is no possibility of EIB "Bearbeiten - Katalogeinstellungen" ist just the way c:/users/...etc fixed. Is the anywere that can help you.

  Thanks FRANK

  Why I can not install Lightroom to a custom through the creative cloud location?

  Lightroom must be installed on your local disk and cannot be installed to a creative custom as other Cloud applications location. Lightroom always installs to the default location and does not take into account any preference you select for a custom location. This behavior is specified.

• You need to remove all files from the hard drive.

  Original title: I need to empty my drive hard so that I can reinstall windows XP - I bought new computer and put my old one family member...

  I don't want my personal info on my old computer.  I was told to empty / delete (?) my hard drive, then reinstall

  Windows xp from the operating system CD.   Even if I throw the old computer, I want all the info removed for security all

  suggestions?

  Hello

  Please take a look at the following article:

  Protect and serve your personal files

• Pavilion 17-f084nf. Need to know how to replace the hard drive

  I do not understand how to get to the series 17-f000 bowels. I want to replace the RAM and HARD drive. There is a manual?

  Maintenance & Service Guide

  See Chapter 5 and 6.  You may need to remove up to 83 screws. You get a tray or paper and lay out how and where the screws go. An alternative is to take digital photos at every step.

• Need to reinstall Vista after replacing the hard drive

  Microsoft website has confused me! Help please! Should I just buy and install vista again?

  * original title - I got my computer fixed and a new drive hard put, I could not find the disks from acer with what he came or the vista disk. Acer disks I found, but how do I buy windows vista? *

  Microsoft website has confused me! Help please! Should I just buy and install vista again?

  Hey LauraR1991

  If you have your acer recovery disks, you need not buy new vista

  you already have a license of vista

  The acer recovery disks are to reinstall vista on how you purchased your computer

  If the disks from acer that you aren't below recovery disks link is to buy vista directly at acer recovery disks

  they sell them at a nominal cost

  Acer Recovery Media purchase program

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Walter, the time zone traveller

• Windows Explorer crashes when you try to copy files (from dvd - rom on the hard drive)

  This is the error I get, copied from the technical details of UAC.

  I tried to create the new account and sfc/scannow
  sfc/scannow pointed out problems and errors, but is unable to repair.
  The Explorer.EXE version 6.1.7600.16450 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: 98c

  Start time: 01ced605f3f95e5c

  Time of termination: 60000

  Application path: C:\Windows\Explorer.EXE

  Report ID:
  Is that the next step of repair window?
  Thanks in advance

  One of the recurring errors in Event Viewer was the 'Source' following 'KScsiPrt ':

  The description for event ID 9 source KScsiPrt is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  If the event is on another computer, the display information had to be saved with the event.

  
  

  The following information has been included in the event:

  
  

  \Device\Scsi\KScsiPrt1

  Which may indicate a problem with the SCSI KernSafe controller.

  Can you try disabling the controller SCSI KernSafe in Manager devices as suggested hereand see if that makes a difference.

  You may need to restart the computer after you disable the driver.

• Do you need to partition the hard drive to install Windows Vista Home Premium?

  I try to install Vista Home Premium on a Dell XPS 420 desktop computer and want to know if the hard disk must be partitioned before that I can do?

  If I need to, how to do?

  Thank you.

  You need at least a partition on the hard drive before you install OS, using management of build-in the windows disk, but there a lot of limit, if it could not reach your goal, you could use the 3rd party freeware

• Resize raw Images? Need help!

  Do I need to resize my raw images when I convert Raw (Nikon D80 NEFF files) of 240 ppi to 300 DPI in TIFF processing?  I'll tell you.  I shoot in Raw, Nikon D80, convert to TIFF to perform the treatment.  The size of the image and the default PPP is 16,133 "X 10.8", about and 240 ppi.  When I shot with JPEG, perfect quality, same device, the file automatically opens with 12 "x 8", about and 300 ppi. "  I can resize the image when I made batch of Raw to TIFF of 300 ppp.  Is how important it?  Most of the photo I don't print not and if I print I usually specify printing size and the laboratory produced the images.  Any help would be appreciated.

  The 13th floor

  No, it will not matter, only the pixel dimensions of importance for the on-screen display

  or on the web. It is important, when you print, but most printers do everything

  the calculations for you when you enter a print size.

  JPEGs and raw images are the same size in pixels, so if you open

  a raw image into elements and go to Image > Resize Image size and value

  the resolution to 300 without resampling box checked, you will see that they

  are the same, so no need to change anything.

  MTSTUNER