Are necessary logical hierarchies?

Similar Questions

• I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Re: "drivers and downloads" my computer dell laptop inspiron I6400 / E 1505; Windows vista Home premium, 32 bit OS: I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Hello

  I suggest you try the given below steps that would help you to view the details of the driver.

  (a) type devmgmt.msc into the search box start and press enter.

  (b) in the Device Manager, right click on the device you need to display the version.

  (c) select Properties.

  (d) click the driver tab and display the version of the driver in the Driver Details.

  Hope this information is useful.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• McAfee VirsuScan & Microsoft Security Essentials - that both are necessary?

  I just MSE on my new computer.  It is installed and running.

  I have a subscription with McAfee VirusScan Plus.

  I understand the need for Antivirus software.

  I don't want problems of 'conflict', and I of is not to have more things that I really need to be 'safe' (a relative term).

  Do I have the McAfee and MSE work together on the same computer?

  Which leads to my basic question:

  Should I also install McAfee VirusScan more in addition to MSE?

  Thank you

  Travis

  Sorry I posted CCET question in a comment on another thread. I guess I'm 'ask a question' hope it's the right place.

  Hello

  You must have a program of security/antivirus on the computer even if it is not running
  or used, because they will always load parts of themselves in memory. Even the remains of those
  uninstalled can cause strange problems.

  Frankly I uninstall McAfee and run his removal tool to avoid problems causing leftovers
  left behind.

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry smartphones update AND EVERYTHING to LOSE! Warnings for the updates are necessary

  I was and am still sort of next to me.

  I received an announcement / notice on my blackberry Curve today that I needed an update, now being the novice user to the technology in the sense of phone I did as he asked. I've updated, woooohoooo, fine, now my phone will be even better, right?

  WRONG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  I LOST EVERYTHING, MY PHOTOS (3 TAKES JUST 2 HOURS PREVIOUS) MY VIDEOS AND BUSINESS CONTACTS...

  So what I did? Well, first of all, I cried (it has been a month really incredibly bad), so I'm crazy and cussed and almost taken over my van and drove my phone because how I just lost all the evidence, I would need to win in an upcoming trial. I felt that all hope was lost.

  Well, instead of flipping out that I was going I thought ok, I'll call T-Mobile and speak to a REP Smartberry Blackberry, they will know what to do as always, right? Well, it was a loss of 12 minutes on hold. He said once you update, unless you have made a backup on the computer or have a memory card and saved individually for every single photo and video on what then everythings gone.

  I said I just moved last week and a half and have not been able to download my stuff to the computer and don't know where my cord is, besides I said since when do I need to download everything and worry about losing things due to an update. I update my computer all the time and do not lose photos and others.

  He said to update your BlackBerry is like defragment your computer, you will lose information. Well, I guess ignorance is a blessing because I defragment often and have never lost a file. (I know in all cases)

  Anyway that I felt that he put the nail in my coffin, he don't mind not connect me to a 'specialist blackberry' waisting their time when I don't have back up before an update. I tried to inform him that the update didn't state that I could lose all the data, it didn't care. Let's say I was a little rude with my frustrations and hung up.

  And then I contemplated driving on my new phone and then some.

  I then started my own investigations in my phone. I can't tell you how or where I found it exactly. But I found a way to cancel my download and return to my original settings.

  Well, I thought that I is not got nothing else to lose literally so I tried.

  Guess what?

  I'M A HAPPY CAMPER! No mind thanks to you, T-Mobile or Blackberry forums. But my pictures and my video evidence is back.

  And I can tell you this much, as I fear, the new update can puke!

  For the brief time I got it, he stunk. To now record videos of it tells me to insert a memory card, there is already one in there? And it seemed not so good.

  Technicians of Blackberry, creative or what you have, thanks to include a warning to your customers that they SHOULD back UP THEIR DATA before the UPGRADE IF THEY CARE TO KEEP THEIR FILES.

  IT IS IMPARITIVE FOR NOVICE USERS LIKE ME!

  Signed,

  Sighing a slight sigh of relief in Illinois!

  nothappyatall wrote:

  I'm curious. After spending the last two hours of reading more keep me normally never to read on this subject, is implemented one of the creators of Blackberry, updated, or in fact anyone involved in the success of blackberry never consult or contribute to the issues of standard users? Or is their expertise-oriented only to those also knowledgeable than them?

  Hi and welcome to the forums!

  First of all I'm not an employee of or associated products Blackberry, RIM

  I am a user of devices such as you, I

  I'm glad to hear that you did a good job on your phone! Bravo for you!

  I have two questions:

  I see two posts listed for you, both in this thread,

  "I'M A HAPPY CAMPER! The spirit of no thanks to you two T-Mobile or Blackberry forums. "But my pictures and my video evidence is back... »

  You asked for help in another forum or are you referring to this forum of Blackberry?

  Also, please, let us know what version of the Desktop Manager you have, what kind of PC or MAC, and what version of device operating system that you are using. (on the blackberry, click the icon options)

  Scroll to all on the first page, look for the version in this format vX.X.X.XXX... P; lease send it with your Blackberry model, OK? ')?

  Now second question, do you need manuals, software, or procedures? I want to assure you, that you can access all the correct information for other upgrades. If we can help you with any outstanding issues please let me know.

  A point for you to consider in the future. Just because there is a new version of the software whether 3rd party or device OS, you decide when or if you want to install it. If your phone works well, you can install if necessary when you have the time, a good backup and read about it here. If your phone does not work well (come here first) we can help you solve the two problems or say if you need to upgrade you differently.

  Yes, there are some members of staff who stop every day and works behind the scenes and with users in messages, other that expressing the frustration was there any specific information you need of them?  An article on the upgrade, or by using the desktop software?

  Thank you

  Bifocals

• San Francisco Bay Area necessary Assistance possible

  Hello

  I'm in a bit of a jam and it is possible (about 50/50) that I might need a bit of assistance in the region of the Bay next Thursday or Friday.

  Apple will probably replace the motherboard on my Mac Pro this week.  Unhappy.  It is covered under Apple Care, but the delay impact on my period on April 19 for my film.

  I have about 24 GB of video data of a card Sandisk UDMA 32 gig I want to download so that I can make my final footage next weekend.  I have a 32 gig USB key that we can transfer.

  The footage was shot on a Canon 5 d and I would like to borrow someone PrPro software here in the Bay area, if necessary.

  Otherwise, I could Fed ex card and pay for fedex return as well.

  Thanks for thinking of it.

  Matt Dubuque

  100 trees

  I had not seen this book. I have a 'gift' from Amazon, just burning a hole in my pocket, so I think I know where I'll start. Thanks for that pointer.

  Good luck and wish only to know some folk in SF.

  Hunt

• Need to access info "header / properties" and the use of a 'peek-a-boo' feature that allows an opening not assigned an e-mail message. BOTH are necessary.

  When the list of "incoming mail is received, a few times an e-mail will have a familiar name, BUT the message is NOT the person I know.» A header would reveal which is the familiar name of MASKING. It is located on the right click of an email entering under "properties.", for those who use the Windows Mail service. Upon activation, two panels are available: "general", line information base; and the jury of "Details". [email protected]

    Here is the "Details" on your recent request:
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from dnvrco-pub-iedge - vip.email.rr.com ([107.14.70.244])

           by dnvrco-fep24.email.rr.com
           (InterMail vM.8.04.01.13 201-2343-100-167-20131028) with ESMTP
           id <20150527165815.TQBS12014.dnvrco-fep24.email.rr.com@dnvrco-pub-iedge-vip.email.rr.com>
           for <[email protected]>; Wed, 27 May 2015 16:58:15 +0000
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from [64.151.119.54] (helo [64.151.119.54:45118] =mail24.smtprelayserver.com)
  by dnvrco-iedge04 (envelope-from < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>)
  (ecelerity 3.5.0.35861 r (Momo - dev:tip)) with ESMTP)
  ID 05/42-22770-6A7F5655; Wednesday May 27, 2015 16:58:15 + 0000
  DKIM signature: v = 1; a = rsa-sha1; d =email - od.com; i=@email-od.com; s = dkim;
  c = relaxed/relaxed; q = txt/dns; t = 1432745904; x = 1435337904;
  h = content-type: mime-version: subject: to: to: date: message-id: reply - to;
  BH = BorokUNlliKkKGt/h0t9J5QZRXM =;
  b = ivSHJkJVgtIuuPbdKelm8wrP9MTDBOfWi38tURaeWYyE7irIYrzg8PjdIXA/r9B3Uc8l1gJJ9blRBU2jcN + jKV4C2 + / 5tSrQSrfiqa9l5xBx81Fm8Winq6uvCxyTCUwioUwJ21eUR7FDAXlDmcg7fbRBoG2b4 + f0CvQLBrdPNxU =
  X-wire-Info: OGZkLjEyLjhhMDAwMDA3NmJmNzIzLlJhZ2luZ210PXJvY2hlc3Rlci5yci5jb20 =
  Received: from r2.us - West - 2A .aws .in .socketlabs .com ([54.186.58.227]) by mail30.email - od.com
  with ESMTP; Wednesday, may 27, 2015 12:58:23-0400
  Received: from support3.webapp.phx1.mozilla.com ([63.245.216.223]), of r2.us - West - 2A .aws .in .socketlabs .com
  with ESMTP; Wednesday, may 27, 2015 12:58:14-0400
  Content-Type: multipart/alternative;

    I do NOT have this option on the right-clicked menu.
  

    Yes, I have been fooled, BUT, with a name of an extended family member, who questions such?  However, the message came from an unknown party, pushing some product from Oprah.   I check now.
  

    There are also e-mails I may NOT wish to indicate that I have "read" them via the formal opening process.  I call this the "peek-a-boo" method of opening an e-mail, as it is NOT a formal opening, per my research.  The point is that NOT all you see on the screen IS what you ARE seeing.  Thus the old saying: "Seeing IS believing.", is NOT true.   This is a more current peeking process, an advancement on the old "300 watt bulb behind the envelope" method of finding out contents withOUT opening the letter.  This applies to a sender I am familiar with BUT, the current topic is NOT of interest to me.   Thus, I can use the "Delete" function with complete satisfaction.
  

    Therefore I wish to know HOW I can gain these two features on THUNDER BIRD e-mails?
  

  Thomas J. Baglin
  [email protected]
  27/05/2015

  R.M. said

  Thank you, you, Matt.
  Regarding the "peek-a-boo," about 15 years ago, it was somewhat revealed the Web that some shippers had the ability to detect IF you had opened their missive.

  This is handled by the Web beacons. Thunderbird blocks remote images by default. Web beacons work only if you enable the remote images in specific email.

  From THIS time, it is the GOVERNMENT that has the ability to detect if you open all or part of your receipts "Entrants".

  Interesting point of view, but not quite corr4ect. f they have access to a mail server IMAP "could" determine the status of mail on this server. In the case of POP e-mail that could determine if it has been downloaded. While I do not trust of Government oversight. About the only time where they would do that would be when they are already studying you as an individual. It's a slow late then.

  So, WHY Windows Mail offers this function and the T-bird, NO mail?

  I played with Visual basic using integrated Internet Explorer about 15 years ago and it was a simple toggle to change the display of the HTML displayed in the source. So I would say it is in windows mail, because he was already in Internet explore and it made for a very simple to implement the functionality. Just expose the existing functionality. After all the composition and rendering in Windows mail used Internet explorer.

  Although the header can help tremendously, , what I SEE is NOT NECESSARILY WHAT THAT REALLY is the content of the e-letter.
  

  This is a feature of Thunderbird. It uses the display names from your address book on incoming mail. You can disable it in the menu (alt + T) tools > options > advanced > reading and posting.

  If the follow-up can be done via the 'Key STROKE' method, and YOU do NOT know of it, then a "peek-a-boo" is useful to have, huh?

  Keyloggers are all also able to capture screens and clicks. If your number more ahead.

  It makes me feel, I have a FEW C-O-N-T-R-O-L that I CHOSE to read, and what I based on the content and subject.

  Seriously. encryption of e-mails with s/mime and free email certificates will do more to protect your mail that any kind of fake check before you read. Most of the people may face apparently not having a certificate of personal mail to encrypt their mail and like most internet technologies, we get the lowest common denominator. This is the plain text that scours the internet to an ordinary human-readable text.

  Please when using these forums not your text indent. This is what makes it become very difficult to read and not wrap. I don't know that that is how you were taught in school. I learned the same thing. But it must comply with the requirements of the opportunity.

• Why the two attempts to start are necessary to start the 10 Windows Boot Camp?

  The first attempt to start seems to stall after the first Windows will appear and the monitor did his normal black screen.   A manual power off is required.  The second attempt to start Windows 10 Home functions correctly.  This on a MacBook with OS X installed 10.7.5 late 2006.  This MacBook as the host has Oracle VM in VirtualBox for Mac installed with Windows 7 Home, Windows 7 Pro and Linux Mint installed 17.2 as guests.  All these operating systems work relatively well.  Only two boot problem with Boot Camp is unusual.

  Your 2006 MB does not officially support W10. If you use the startup disk and select Bootcamp, it requires a second reboot? You are using any third party NTFS software.

• How can I know what "Treatment" (as listed in Windows Task Manager) are necessary and who should be "done"?

  Running Windows XP (home edition)

  I recognize some of the process that some I'm not.  Most is listed as 'System' under the name of system, some like the "owner", some as "Network Service", some as "Local Service".  Should I still worry about them?  (I'm hoping to speed things up).  Thank you!

  Hello

  All running services or displayed in the Task Manager are closely related to each other which will help in the management of programs and application.

  You can check the link below: overview of the Task Manager: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/taskman_whats_there_w.mspx?mfr=true

  To improve the performance of the computer, try the steps listed in the links below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx

• Some of the windows home CD files are necessary .___Please home edition insert windows CD-ROM into the drive selected below, and press okay.___E:\i386

  I need the file i386 install languages for Japanese and other oriental languages on my computer. I do not have the disk and I don't know where to download them from the site. It says browse and I know that there is a file i386 on my computer but I don't know which one to choose.

  I want to only download the East Asain languages for Japanese and etc. Thank you for your time

  Hi Alpha_Q,

  You are able to install? I386 files are also saved in your pc under C:\WINDOWS\ServicePackFiles\ServicePackCache

• What measures are necessary for UNTAG vlan by default to port gigabit on SRW208P

  We have 1 VLAN disabled on our standard Cisco Catalyst switches and use our default VLAN 11.  We have recently added some 221 VLAN for voice while implementing a new Cisco UC system.  I can't disable VLAN1, however, I made the default VLAN 11 and 221 VLAN voice.  In management of VLANS, I can UNTAG 11 (VLAN PVID) on all ports but the connection to the Cisco 6506/port Gigabit.  The port still tags VLAN 11 and 221 and removes the brand VLAN (PVID) 1.

  I tried to make changes to the switch when you are connected to the switch and when I do the setting, the switch loses the connection to the 6506.  If I make the appropriate changes to GI (1) when you are connected to GI (2), the change takes effect, however, when I move the connection to GI (1) cable, the port and VLAN 11 configuration changes becomes identified and VLAN1 becomes marked.

  What is needed to prevent this?

  Hello Mike,.

  The roles of smartport negotiated links and seem to have resolved to manually set the port configurations.

  In addition, SX300 series does not support the SPAN distance, therfore silent monitoring does not work between the UCCX and phones when you plug into the switch (s).

• additional connection information are necessary to connect to this network windows 7

  Just for the record, this works very well with Windows XP

  I have a question about Windows 7 and x 8021.  You know with windows 7, you can get the popups and the connection using the PEAP authentication.

  If authentication fails for a reason that you will never see the pop-up again.  The only way to solve this problem is to turn on/off the network adapter or disconnect and reconnect the network cable from the port or enter the settings 802. 1 x and out to get the authentication to occur.

  It's the only way I have found to get the pop - up is displayed so you can see that the additional connection information of the message are required to connect to this network to the network so that you can log on to the network.  I also tried this fix, but it does not solve the issue.

  http://support.Microsoft.

  Is there a solution so if authentication or logon fails the pop-up message is displayed so that you can log in without doing the steps I mentioned above.

  Hello

  I suggest you to report the issue in The Forums Pro TechNet Windows 7 IT: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Tables and lists are necessary!

  I really like to use the Muse and it's perfect for simple sites. However, even simple sites must:

  Feature	Reason
  Tables	Because sometimes a list of items must be presented in a table (list of classes to think or a school play - they are tabulated in the real world. Why not to muse? There are reasons to use tables that are not trained in the old way of online content available! It's silly that the Muse team cannot understand this!
  Lists	It is a natural part of the web. It's a shame that it has been ignored for years Can't understand why Muse build this! We arrived at the Moon - why we cannot build lists?

  EverNote, Onenote, Dreamweaver, Word... even this forum supports the two concepts... why not Muse?

  Support to the lists is 20141.

  Support of tables is not there yet.

• What permissions are necessary to deploy from EGGS/OVF

  Our environment is vCenter 4.1 ESXi 4.1 U1 and U1. We have a lab multitenant environment where users are isolated with Pools of distinct and separate VMS, storage and network resources. Users are all these directors.

  They want to be able to deploy templates of the OVA/OVF, but they get this error (attached image) at this stage. I would like to know the minimum permissions required to allow this, without exposing other resources of tenants.

  I tried to recreate the environment in my lab. I assigned a test user within a pool of resources, network, file VM folder and folder on drive 'administrator' privledges. I then imported the OVF for CapacityIQ without any problem.

  To troubleshoot further, I deleted the access to the list of resources and could choose is no longer a host. I then restored that and removed access to the network folder and got an error saying that I had no right to a network to assign the FVO to.

• necessary logic in the query

  Hi Expert,
  
  I use under query mentioned I join two table but in the second table cclean.vm_cellc_postal_address b I must add one more on condition that
  If con b.street code is 3 digit as 123 and then add the prefix 0 (AND TRIM (a.post_code) = TRIM (b.street_code) ;)
  
  
  SELECT a.address_id AS address_id,
  a.Line_1 AS line_1
  a.City CITY,
  b.Town CITY,
  a.State AS State,
  SUBSTR (b.province, 0, LENGTH (b.province) - 1) AS a province.
  a.clean_status as clean_status,
  b.street_code
  FROM (SELECT ah.address_id, ah.suburb, ah.line_1, ah.city,
  Ah.post_code, ah.state, ah.country, ah.clean_status
  OF cclean.vm_processed_address_history ah
  WHERE ah.suburb IS NOT NULL
  AND ah.post_code IS NOT NULL
  AND SYSDATE BETWEEN ah.effective_start_date
  AND ah.effective_end_date
  AND ah.suburb IS NOT NULL
  AND ah.post_code IS NOT NULL
  AND NVL (UPPER (ah.clean_status), 'NONE') <>'
  AND (UPSTAIRS (line_1) NOT AS 'PRIVATE BAG % %')
  AND SUPERIOR (line_1) NOT LIKE '%p % % BOX.
  )) a,
  cclean.vm_cellc_postal_address b
  WHERE TRIM (UPPER (a.suburb)) = TRIM (UPPER (b.suburb))
  AND (TRIM (UPPER (NVL (a.city, 'dummy_value'))) <>
  TRIM (UPPER (b.town))
  OR GARNISH <>(UPPER (NVL (a.state, 'dummy_value')))
  TRIM (UPPER (SUBSTR (b.province, 0, LENGTH (b.province) - 1)))
  )
  AND TRIM (a.post_code) = TRIM (b.street_code);

  You can use the logic in where condition but not sure about the performance. In any case find the query below with logic

  SELECT a.address_id AS address_id,
  a.Line_1 AS line_1
  a.City CITY,
  b.Town CITY,
  a.State AS State,
  SUBSTR (b.province, 0, LENGTH (b.province) - 1) AS a province.
  a.clean_status as clean_status,
  b.street_code
  FROM (SELECT ah.address_id, ah.suburb, ah.line_1, ah.city,
  Ah.post_code, ah.state, ah.country, ah.clean_status
  OF cclean.vm_processed_address_history ah
  WHERE ah.suburb IS NOT NULL
  AND ah.post_code IS NOT NULL
  AND SYSDATE BETWEEN ah.effective_start_date
  AND ah.effective_end_date
  AND ah.suburb IS NOT NULL
  AND ah.post_code IS NOT NULL
  AND NVL (UPPER (ah.clean_status), 'NONE') '
  AND (UPSTAIRS (line_1) NOT AS 'PRIVATE BAG % %')
  AND SUPERIOR (line_1) NOT LIKE '%p % % BOX.
  )) a,
  cclean.vm_cellc_postal_address b
  WHERE TRIM (UPPER (a.suburb)) = TRIM (UPPER (b.suburb))
  AND (TRIM (UPPER (NVL (a.city, 'dummy_value')))
  TRIM (UPPER (b.town))
  OR CUT (UPPER (NVL (a.state, 'dummy_value')))
  TRIM (UPPER (SUBSTR (b.province, 0, LENGTH (b.province) - 1)))
  )
  AND decode (length (TRIM (a.post_code)), 3, '0' |) TRIM (a.post_code), TRIM (a.post_code)) = TRIM (b.street_code);