San Francisco Bay Area necessary Assistance possible

Similar Questions

• cDAQ-9174 does not work in the Bay area

  Hello

  I have a strange problem. We use a cDAQ 9174 to collect data of voltage. It works very well when we use it in our lab in San Clemente, California. However, when we bring this same cDAQ North to our laboratory in the Bay area, it is no longer connects with the laptop. We plug it in the same way, but the computer does not detect the cDAQ while Northern California laboratory. While at San Francisco International Airport, I even tried to plug the cDAQ to my computer while waiting for my flight, and is not connected with the computer then.

  But when we arrived in San Clemente, California and tried the cDAQ overnight, he connected and communicates very well with the computer.

  It is with the same laptop, cDAQ and power cables and usb. The only thing that has changed is the location. We brought this cDAQ North 3 times and each time it never works in the North, but the day after return to the South in San Clemente, the cDAQ works.

  Can someone explain what is happening? It is difficult to solve the problems because right now the cDAQ works very well even though we are in San Clemente.

  Thank you

  OK, I think I understand why he did not.

  I plugged the DAQ today and noticed that I had some ths same problems as before, he did not communicate with my laptop. Labview programs designed to ensure that it did not. I remember talking to a representative of Labview by telephone and he said that sometimes turns off background services. I went looking and found a service called 'NOR device Loader' was arrested. The executable is called nipalsm.exe.

  I restarted the service and reconnected in my DAQ and it still worked!

  I believe that through this service is stopped, the computer does not load the drivers for data acquisition, so that won't work.

  I was able to reproduce the problem by stopping the service and trying to launch my labview programs, meeting the same mistakes that I've had in Norcal. And I solved the problem by restarting the service.

  We had tried to restart your computer to solve the problem, but I guess that this service is not starting sometimes when the computer restarts.

• Antenna Apple TV screensaver is blocked on San Francisco

  Air screen saver works normally except what happens in San Francisco every time. It was working fine until about two or three weeks.

  Unfortunately there is no way to control what screensaver air rises, outside setting when new are downloaded

  You can give your comments

  http://www.Apple.com/feedback/

• I installed San Francisco as a system font, but I can't use it in one of the Creative Suite applications. Is there a way to get around this?

  Recently, I upgraded my system in San Francisco Helvetica font, but I can't use the San Francisco Police Department in one of the Adobe Creative Suite applications (IE Photoshop, Illustrator, etc.). Is it possible for me to use in these applications? If this is not the case, how can I get a copy I can use the Creative Suite?

  So... Update: week last Apple released version beta of the San Francisco police to iOS9 and developers of El Capitan: Fonts - Apple Developer

  Only available for download from the composition of the Apple Developer ($ 99 / year)- BUT the download link is unavailable today (San Francisco policies |) Apple Developer Forum)

  Once they fix the download and it ends up working with Adobe applications, I will let you know!

• Google shows my weather situation as San Francisco.

  I live in Buckingham (Dallas).  I don't know how this change in San Francisco.  It has just shown one day a couple of weeks and the system won't let me come back to my correct location for the weather.  Called Apple Support and no help.  Referred me to the Weather Channel, but so far, did not get anything else than voice mail.  What happened and how do I get my time back to Buckingham (Dallas)?  I have a Time Machine backup but am wary to try this first.

  Have you checked the Date and time preferences?

• I would like to install firefox on my mobile of San Francisco - can I do this?

  My Orange San Francisco mobile is unlocked to 3UK and I would run firefox on it.

  It is a phone ARMv6. Mobile Firefox requires a phone that has an ARMv7 support. We investigate adding ARMv6 support if there is no concrete timetable for this work.

• I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Re: "drivers and downloads" my computer dell laptop inspiron I6400 / E 1505; Windows vista Home premium, 32 bit OS: I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Hello

  I suggest you try the given below steps that would help you to view the details of the driver.

  (a) type devmgmt.msc into the search box start and press enter.

  (b) in the Device Manager, right click on the device you need to display the version.

  (c) select Properties.

  (d) click the driver tab and display the version of the driver in the Driver Details.

  Hope this information is useful.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr

  I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
  What... do not know any solution.

  Hello

  Please try to post your query in communities:

  General discussion of Photoshop

  Illustrator

  Premiere Pro

  Kind regards

  Sheena

• San Francisco are

  This font is listed as new in El Capitan. It is not in my book of police but I don't like the look of it. Where would download it please?

  As far as I know, you can not download anywhere.  The reason is, designers/developers of the police don't want it available for commercial use.  If you download it, you can use it for documents or something else that can be printed.

• sVmotion failed - dmotion-scsi files are deleted - recover possible?

  After a failed sVmotion using the plugin to the VC, I thought that I could delete the files dmotion-scsi and re - save the vmx file and everything would be fine.  Well, it isn't.

  The vmdk files seem to all have moved successfully, but the registration the vmx, he believes that they are in a different LUN.

  Is it possible to edit the vmx so that it points to the new files vmdk on the LUN that is correct to instead point to the files dmotion-scsi on the old MON (who left) and re - register the vmx so that I can get the comments to the top and running?

  I can post the vmx if necessary.

  OK... check the .vmx make sure that it points the correct hard.  If several hard then 0:1 and so on.

  > scsi0:0.fileName = "vmname.vmdk".

  also, check the hard and make sure that it points to the right - flat hard

  > # Extended description

  > RW 83886080 VMFS "vmname - flat hard."

• Another video card can be installed on a model P2 1120 PC? Also, how many open bays are there?

  I have HP Pavillion Model P2 1120 PC running on Windows 7 Home Premium and I would like to install a video card as quickly. This model will support this? Also, are there front open berries on this model?

  Here are the specifications of your desktop HP Pavilion p2-1120. As you can see on the photo of the motherboard down and NO expansion slot;

  

  In addition, there is only a Bay 5.25 inch ODD (CD/DVD/Bluray) and a 3.5 inch HDD (hard drive) Bay in this system. This means that there NO bays open... internal, external or otherwise.

• Are Windows 8 Possible refund?

  I think I have the inspiron14 5447 in a few days... However there seems to be no option to do so without an operating system (Linux or free back)...

  I really don't like windows 8 and prefer to use Ubuntu :)

  As far as I know, a refund is the only option... How would I go to get a refund for the provided license with the PC, I'll buy? Thanks in advance

  No refund in accordance with the agreement with Microsoft. However, you can buy via the website of business sales, even if you are not a business. Computer with diff OS configuration is possible if you choose a business like this - model

  http://www.Dell.com/us/business/p/laptops.aspx?c=us&l=en&s=BSD& ~ CK = minutes #! facets = 80770 ~ 0 ~ 1791343 & p = 1

  However, it would be more economical to buy the Inspiron with windows and make a system image to save for the future, when you want to sell. The windows operating system belongs to the computer must therefore be included.

• McAfee VirsuScan & Microsoft Security Essentials - that both are necessary?

  I just MSE on my new computer.  It is installed and running.

  I have a subscription with McAfee VirusScan Plus.

  I understand the need for Antivirus software.

  I don't want problems of 'conflict', and I of is not to have more things that I really need to be 'safe' (a relative term).

  Do I have the McAfee and MSE work together on the same computer?

  Which leads to my basic question:

  Should I also install McAfee VirusScan more in addition to MSE?

  Thank you

  Travis

  Sorry I posted CCET question in a comment on another thread. I guess I'm 'ask a question' hope it's the right place.

  Hello

  You must have a program of security/antivirus on the computer even if it is not running
  or used, because they will always load parts of themselves in memory. Even the remains of those
  uninstalled can cause strange problems.

  Frankly I uninstall McAfee and run his removal tool to avoid problems causing leftovers
  left behind.

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.