Are not in the print spooler service and must not be restarted in Windows Vista

Similar Questions

• the print spooler service may not be running

  Hello

  I have 4 computers around here, and I'm trying to get a printserver running on one of them, so we have installed windows 2008, set up as a server to printing etc..
  Now when I try to add the printer to my computer laptop windows 7, it works perfectly, and is the same for one of the windows xp workstations.
  However, when I try to add the printserver on windows server 2003, it starts talking about missing drivers.

  The printer is a HP LJCP3505 PCL6, and he is already working on a normal (eg. non-printserver associated) network.
  I downloaded almost all the drivers, I could find from the HP website, but whenever I try to add them, it tells me that they are not valid drivers.
  and on another computer windows 7, I get the following error message:

  Could not connect to the printer.
  On the server print spooler service could not be executed.
  Restart the spooler or restart the server

  (on a side note: it's a translated error message, our systems are not English)

  I don't know if they are related, but I checked the print spooler service, and it was fine (auto startup, active etc.).
  the same goes for its dependencies.

  Hi LeanderML,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in Technet Windows Server.

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem printer-"the print spooler service does not work.

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  tried to add the printer, but get message "the print spooler service is not running" what I do?

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Not in the print spooler service

  Trying to install wireless printer, but cannot load disk from HP software because "Spooler not to the print service. Had problems of virus recently and suspect damaged printer driver. Where am I going to restore the print spooler service?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the print spooler service in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. After the change is made click apply and then click OK. Restart the computer and verify if it has started. Hope this helps, Gerry Cornell

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• The print spooler service is not running

  I had a virus that I got rid of but now my printer does not print, it comes up with "the print spooler service is not running" and I can't add a printer.  What should I do to solve this problem.

  It's pretty easy to start the print spooler service... but may not stay started.

  To restart the print spooler:

  • Click Start, click Run, and then type services.msc in the run box, and then click OK
  • Scroll down the list until you get to the print spooler and double-click the entry
  • Make sure that the "Startup Type" is "automatic".
  • Click on the button 'Start '.
  • OK your way out

  In the likely case where this isn't a solution permanent for you, when you post, include the following information:

  1. What version of Windows you have, including the service pack (start > run > winver > OK)
  2. What make and model of printer you have
  3. What antivirus you have installed
  4. If your computer was without an antivirus application or current subscription for your antivirus (in other words, how is it you got infected in the first place)
  5. What steps you have taken to determine that your system is now free of malware (i.e. what applications antivirus and antimalware you scanned the system with)

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Error "the print spooler service does not work.

  print spooler - HELP

  my printer disappeared and when I tried to reinstall a message appears that the print spooler service is not runnin - HELP

  Hi masubb1,

  ·         You did changes to the computer before the show?

  You can try the following solutions.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow this guide step by step to solve the problem.

  Printer in Windows problems

• How can I fix the error message "the print spooler service does not work."?

  All printer drivers that I had loaded do not work or have disappeared.  After you download the printer drivers, I got the error message: "operation could not be performed.  The print spooler service is not running. "I have Windows XP.  I need to print now!

  To start the print spooler service, click Start > all programs > Accessories > run. In the run box type in services.msc. In the Windows Services window right-click on print spooler and select open. You will then see the options "Start automatically", and then on the button 'Start Service'. Click on those and then click apply then OK. Who should start the print spooler service, however, if you get an error message, see the link below for more information.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/391f3c57-5d2b-4E88-ADC6-190429a7fdbe

• Get the message that indicates the print spooler service is not running

  Printer to work, cannot get message reads "the print spooler service does not work.

  Hello

  1. could you give us the exact error message?

  Method 1.
  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  Method 2.
  Also, try the methods listed in the section below and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Microsoft.com/kb/308028

  I hope this helps.

  I hope this helps.

• The Print Spool Service does not work

  I use Windows XP and have 2 printers installed.  I had no problems until recently, when I try to print I get an error message that I need to install a printer.  When I went to control panel to check the status of my printers don't have no installed printer.  When I clicked on the "Add a printer" icon, I received a message that the "Service of Spool of printing does not work.".  I can't find anywhere in the menu helps an answer to this problem.  Any help would be greatly appreciated.  I must mention that I restore the computer to an earlier time and he has not made a difference.

  To activate the Print Spool Service, follow these steps:

  1. click on the Start Menu, click Run, type "services.msc" and press ENTER.

  2. in the Services pane, click on "Alert" and scroll down until you see "print spooler".

  3. click on "Start service" or "Restart Service", as the case may be.

  The print spooler service should now be enabled.

  Check if the printing problem is resolved.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.