Are there events for bezel 'SWIPE_UP' 'SWIPE_RIGHT' and 'SWIPE_LEFT '?

So, I make a game that pits two living players against each other to quickly solve a puzzle of screen on. Each turn is timed, but each player receives a pause button. When the game is paused, the screen is covered so that players cannot cheat the timer.

I also have a feature that penalizes a player making a pause the game (by reducing the maximum points available), but the problem is that if use you native scanning of the Playbook movements, it will freeze the app and stop the stopwatch, which is fine, but it bypasses my pause feature and leaves with the puzzle there on the screen.

What I'm looking for is a trigger event, like the current "QNXApplicationEvent.SWIPE_DOWN" but for others, shots of native bezel. I need to replace the native behavior (as you can do with little AIR for Android physical buttons), but I just want to add a specific function to the application to go with the native behavior

I am aware that I will probably to rely on some version of the honor for some, this system, but it is really annoying that I can't cover at least to the top of the screen when the application is placed in the background. It makes all the games of this type, or style games 'Brain Age', cannot conceive properly.

Anyone know if these event triggers exist and I have not found just not them? Most applications will not need them, but, especially for games, I find it shocking, if it is not possible to run a few lines of code enforcement on these events call bezel.

Thank you!

Hey,.

I'm not entirely sure what you're looking for but im going to take it. IM assuming you are trying to find out if an app was minimized and sent in the background? If Yes, there is an event you can listen. Although two events. the first event is the Event.DEACTIVATE. This event is sent when your application is reduced and sent in the background. so his return when a user slides up (and sliding sideways, assuming that also reviewed a minimization). the other event is the Event.ACTIVATE This event is sent when your application is full screen again and the application of over the top of the page.

so in your main application, you should have these lines:

this.addEventListener(Event.DEACTIVATE, onDeactivate);

this.addEventListener(Event.ACTIVATE, onActivate);

(...)

public function onActivate(e:Event):void
{
    //show screen

}

public function onDeactivate(e:Event):void
{
    //hide screen

}

hope that helps. Good luck!

Tags: BlackBerry Developers

Similar Questions

  • Are there any tools to stress test and generate tracing information to analyze?

    I'm looking now from an Android Developer. Are there tools for stress test (Android tool Monkey) a BlackBerry app in the Simulator and the device?

    How can I create a log for blocks of instructions in a class file, similar to what I can do with the android.os.Debug class?

    Thank you.

    You're out of luck on the BB env... I also just Android...

    I don't know all the stress test tool - you will need to write your own...

    You can connect a debugger via Eclipse... you can not a stack trace, UNLESS you catch

    a Throwable or you catches the Exception... and even then your code cannot

    obtain or generate the stack trace... to look in the newspaper of the peripheral events - and IS NOT

    tell you the line number... only the method is in...

    Compared to the Droid - debugging on BB tools are extremely primitive... is a Java 1.1

    implementation as well, so don't think you'll be carrying on your Droid code without a lot of

    changes (ArrayList to the vector... etc.)

  • Are there drivers for the recorder sony icd-bp150 for windows 7

    Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

    Hello sconley3.

    I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

    However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
    Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
    Plug the other end of the cable to the Microphone Jack on the computer.

    You can follow the link below to transfer files using mini cable plug.
    http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

    Kind regards
    ColbyP.

  • Why are there redundant for Microsoft Security Essentials download sites?

    Original title: Microsoft Security Essentials:

    At the insistence of some other people on this community, I decided to start another thread for this exact same topic:

    Why are there redundant for Microsoft Security Essentials download sites? I went on the first site in my search on the web:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=520

    It looks pretty official to me, however, there is only one problem with the above site. Download options are way too vague for us lay people. After publication on the website of MS Community, I was quickly corrected on my ad which does not seem to be an idle thread and offered a link to download the instructions and frequently asked questions that did not work. Much later, I was offered another site to download with different language options and a more detailed description of download:

    http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-all-versions

    Well, I have to ask the same question again, but in a different way: why society billions of dollars allows this kind of nonsense (multiple and various download sites on the web) occur under their name? Excuse me if I look a little frustrated on this problem, but I am!

    Here's what the site was used initially. I still don't know which version to download for use on this site. The only distinction: "amd64" or "x 86". I don't know looking below that mean both.

    Version:
    Date of publication:

    4.4.0304.0

    10/11/2013
    Name of the file:
    File size:

    ENUS\amd64\MSEInstall.exe

    13.0 MB

    ENUS\x86\MSEInstall.exe

    10.6 MB

    Download sites are for companies and technicians who need to deploy these.  Basically, the people who understand and who need these details.

    For consumers (users of this community site), the printable page is simply microsoft.com/security_essentials

    Here, you can easily get the version you need.

  • Are there problems with Firefox 5.0 and 1Password 3.6.1?

    I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
    Are there problems with Firefox 5.0 and 1Password 3.6.1?

    They say you need 1Password 3.6.0 or later to work with Firefox 5.0

    http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

    http://help.agilebits.com/1Password3/firefox.html

  • Are there differences between Windows 7 OEM and the commercial full version?

    Are there differences between Windows 7 OEM and the commercial full version?

    Commercial versions include two disks installing 32 and 64 bits and can be moved to new systems.

    OEM versions are either 32 or 64-bit - only installation disc is included - and cannot be moved to a new system.

  • Are there drivers for Officejet 8500 A910 2008

    I am trying to install an Officejet Pro 8500 A910 on a 32-bit of Windows 2008 Server.  Are there drivers for 2008?

    Here is a link to HP.com that uses drivers you are looking for

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-67133-1&CC=US&DLC=en&LC=en&os=4022&Product=3752456&sw_lang=

  • Are there discounts for employees of the Oracle

    Hello

    I'll take OCPJP 6: exam 1Z0-851 very soon. I have not yet voutcher.

    Are there discounts for employees of the Oracle? Where can I get more information on this topic?

    THX.

    Oracle employees can go to the University of my.oracle.com > Oracle > Certification > certify you > used to access delivery information. You will need to check with your administrator to determine if it will approve the refund.

    Kind regards
    Brandye Barrington
    Certification Forum Moderator

  • My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted the bridge and PS, and I rest

    My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted bridge and PS, and I restarted the computer (Mac). Still the same problem.

    I thank assani, but it wasn't the answer. The problem was, I finally understood, that the "option for generation of quality and preview thumbnails" wasn't on "high quality" as it usually is. I have no idea how this happened as I never change this option.

    Thanks a lot for your help.

    Mitchel Gray

  • Are there bugs for the iPhone 6 in iOS 9.3.2?

    Guys my iPhone 6 running iOS 9.3.1 and recently there was a new iOS version 9.3.2. Are there major or minor issues for this update for the iPhone 6 (9.3.1)? Is - this safe ito update this iPhone 6 to the new iOS 9.3.2?

    Thank you.

    I use 9.3.2 on iOS devices 4 without any problems...

  • Satellite X 200-219: are there drivers for Vista Ultimate 64-bit

    I am trying to upgrade the operating system on the X 200-219 this 32-bit edition of Windows Vista Home Premium to Windows Vista Ultimate 64 - bit Edition.

    The question is, are there drivers available for the satellite X 200 series that support Windows Vista 64-bit systems?

    Also, if I can't upgrade, how can I use a maximum of 4 GB of RAM installed on my system if Windows Vista Home Premium can only see 3 GB max?

    > The question is, are there drivers available for the satellite X 200 series that support Windows Vista 64-bit systems?
    Unfortunately, it does seem that the divers from 32-bit (no matter if it s Vista or XP) are available on the European driver Toshiba page.
    It seems that the Vista 64 bit drivers are not supported at this time.

    > How can I use a maximum of 4 GB of RAM installed on my system if Windows Vista Home Premium can only see 3 GB max?
    Well, usually the memory of 4 GB problem is the limitation of 32 bit OS System.
    http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

    However, I read some reviews and it looks like this after installing Vista SP1, one can recognize all of 4 GB.

  • Tecra A11-13 q - are there drivers for Windows 7 32 bit

    Hello

    I want to buy portable (as in the subject).
    In the shop, there are only 64-bit Windows 7.

    My question - is there drivers for Windows 7 32-bit system if I want to change the system?
    Or I have to use only 64 - bit.

    And another. I found on the web that models the Tecra A11 form are - PTSE4E, PTSE1E, PTSE0E and in stores there are models such as 13 q, q 11, 131? who's who?

    Hello

    Yes, it seems that Win 7 32-bit drivers are available on the European driver Toshiba page.
    Check just.

    But even if the drivers are not available, you can install the Win 7 32-bit operating system.
    In most cases the Win 7 OS devices automatically recognize and install the common drivers in very rare cases, you will need to get the drivers on 3 third-party pages

    But as I said, it seems that the 32-bit drivers are released

    Welcome them

  • Are there plans for the new ESW 500 models switch with PoE capability?

    I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

    Reasons why new ESW 500 switch with PoE capacity are necessary:

    • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:

      • 7945, 7965 and 797 x phones
      • series phones (not yet supported with the SBCS solution) 9900 and 8900
      • PVC2300 Surveillance Cameras
      • AP541N access points
    • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
    • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

    Existing ESW 500 switch PoE capabilities are:

    • ESW-520-8 P: 60W
    • ESW-540-8 P: 120W
    • ESW-520-24 P: 180W
    • ESW-540-48P: 380W
    • ESW-540-24 P: 280W

    PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

    • 8 port: 123.2W
    • 24 port: 369.6W
    • 48 port: 739.2W

    Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

    Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

    / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

    We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

    • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
    • A typical deployment would most PoE devices connect to a switch.
    • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
    • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
    • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

    We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

    Thanks again for the question,

    Stephanie Reaves

    Cisco Small Business

  • Are there any tools I can easily and cheaply convert my URL into something more mobile friendly?

    Hello world

    I have a photography website Toronto-photographers specialized Commercial product photography in the product, Food and Drink photography

    I want to be mobile friendly.  I made my website on Dreamweaver.  Are there any tools I can easily convert this URL into something more mobile friendly?  I am panicking because Google will soon make mandatory for web site to be mobile friendly for good SEO positions.

    Thank you!

    PS - I was just add my URL - why Adobe changes the link to the web site title tag?

    It looks like that you created this site a long time ago, because all I see is that it is designed using old tables shaped.  There is nothing wrong in the use of tables, but as you have already acknowledged that Google might start to penalize the people who still use old outdated technology!

    In any case, to solve your problem, you can redesign your site this weekend using bootstrap information which is already available in the current edition of Dreamweaver or you can download the getbootstrap.com zip file to use in the DW 6.  Something about bootstrap, there are many video tutorials on youtube, and I suggest to spend Friday watching those dear to you get started and trust you to know that it is quite simple for the redesign of your site from scratch.  You already have the text and images, and now you just put them in the format 'bootstrap '!

    The videos are:

    https://www.YouTube.com/watch?v=gqOEoUR5RHg>

    http://www.newthinktank.com/2015/11/learn-bootstrap-one-video/>

    https://www.YouTube.com/watch?v=3cYWiU_HsgM

    There are other institutions and you just have to watch them to get used to begin.

    Some people use Microsoft Visual Studio (Free Community Edition) to create MVC Web sites, using bootstrap / c# / Razor syntax and it is also something you should know.  MVC stands for Model-View-Controller and MS has released a lot of videos on them as well.  However, this is not necessary, but for the sake of interest I mention here just in case you have interest in web development and all that.

    Good luck.

  • Are there alternatives for the large objects through callback JMS?

    Hi, I am developing an application that uses JMS reminder to create this 'multi-threaded feel '. All's well if the data object returns of each MDB is relatively small, but as soon as we ended with the need to send back large objects (for example, an ArrayList of 250 objects k) of the MDB (with 20 MDB active at a given time), it breaks the app when the server ran out of memory when the MDB strikes the setObject method call on the response (server log see extract below). Is there any "known" for JMS problem managing large objects? Are there any other alternatives to recall JMS to create this 'multi-threaded' feature in WLS? Thanks in advance.


    # < 19 October 2010 01:33:16 SGT > < WARNING > < EJB > < RTAN12 > < AdminServer > < ExecuteThread [ASSET]: '13' for queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <><>< 1287423196150 > < BEA-010065 > < MessageDrivenBean threw an Exception in onMessage(). The exception was:
    means: allocLargeObjectOrArray - size of the object: 9273360, elements of Num: 9273344.
    means: allocLargeObjectOrArray - size of the object: 9273360, elements of Num: 9273344
    at java.util.Arrays.copyOf(Arrays.java:2786)
    at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:94)
    in java.io.ObjectOutputStream$ BlockDataOutputStream.drain (ObjectOutputStream.java:1839)
    in java.io.ObjectOutputStream$ BlockDataOutputStream.setBlockDataMode (ObjectOutputStream.java:1748)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1161)
    at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
    at weblogic.jms.common.ObjectMessageImpl.setObject(ObjectMessageImpl.java:157)
    at weblogic.jms.common.ObjectMessageImpl.setObject(ObjectMessageImpl.java:133)
    at com.hp.it.ipg.vfmaps.services.vfdataquery.ejb.VfDataMiner.onMessage(VfDataMiner.java:163)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    to $Proxy123.onMessage (Unknown Source)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:328)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3748)
    to weblogic.jms.client.JMSSession.access$ 000 (JMSSession.java:114)
    to weblogic.jms.client.JMSSession$ UseForRunnable.run (JMSSession.java:5096)
    to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Published by: user651019 on October 18, 2010 11:40

    It is your writing, you have put in place a use case when the application attempts to use on several large objects in parallel. The FMV is just short of the bunch. Looks like the same thing would be whether it's large objects JMS messages, or another type of object...

    Some ideas: (A) release the memory JVM - possibly by setting pagination (see chapter JMS of the Performance and Tuning Guide), (B) reduce the size of the async message line (search for "MessagesMaximum") in the same guide, (C) increase the memory to the JVM, (D) see if its possible to decompose each large into several small objects/messages object, but perhaps especially (E) do not expect to be able to have multiple threads each operate on a very large object separate simultaneously - each object necessarily consume memory while it is accessed - seriously consider reducing the number of concurrent threads according to chapter MDB of the Performance and Tuning guide.

    Tom

Maybe you are looking for