Are there examples of DataSocket up-to-date for Labwindows/CVI

Similar Questions

• How to make the false colors on gray-scale image? Are there examples of the imaqSetWindowPalette function?

  Hi ~ I'm using LabWindows/CVI & OR vision. I want to apply false colors on my image of gray, but I don't know how to use the imaqSetWindowPalette() function. Are there examples? or a better idea? Thank you very much ~ ~ ~

  It depends on what you're trying to achieve:

  1 imaqSetWindowPalette() change the palette to display only. This affects the display, but still, the underlying image is grayscale.

  a simple use is:

  {

  const int window = 1;

  Image * image;

  / * retrieve and store your image * /.

  ...

  / * change the palette * /.

  imaqSetWindowPalette (window, IMAQ_PALETTE_BINARY, NULL, 0);

  / * display the image * /.

  imaqDisplayImage (image, window, TRUE);

  }

  as specified in the documentation, the third and the fourth parameter of imaqSetWindowPalette() are used only when the pallet type is set to IMAQ_PALETTE_USER, in this case, you specify the colors you want to use for the display.

  {

  / * declare and fill you the palette * /.

  RGBValue palette [256];

  / * fill your palette here * /.

  palette [0]. R = 0;

  palette [0]. G = 0;

  palette [0]. B = 0;

  .alpha palette [0] = 0;

  palette [1]. R = 255;

  palette [1]. G = 0;

  palette [1]. B = 0;

  palette [1] .alpha = 0;

  / * etc * /.

  / * Use the palette * /.

  imaqSetWindowPalette (range of the window, IMAQ_PALETTE_USER, sizeof (palette) / sizeof (* palette));

  }

  fixed palette, you can also set you palette with an initializer:

  RGBValue palette [256] = {{0,0,0,0}, {255,0,0,0}, {0,255,0,0}}; / * you write 256 color values you want your palette consists of * /.

  2. If you want the palette to be final during the recording of the image with the new applied palette, you can specify the palette in the call to imaqWriteFile().

  3. or you can convert your image to RGB (imaqCast()) then... you're on your own: for some unknown reason, the lookup table in a call to imaqCast() converting grayscale 8 bit RGB is not documented as being used. error in documentation? removal of the deliberate feature? Finally, you can test what happens if you specify one.

• Are there examples of applications developed oracle MAF the playstore?

  Are there examples of applications developed oracle MAF the playstore?  Can someone tell me the name of any published applications? Thank you

  Yes, there are a lot of apps.

  A few references here:

  Customers of Oracle Mobile Application Framework

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• Are there examples that do not require a personal Web server?  I don't not a server for my aps.

  Then return Cirrus, Stratus, it was not necessary for a personal Web server hosting a CGI script.

  I have no need of a server no AS3 because my server is just going to be another peer node on the network

  It is a professional way to manage things too:

  (1) you have a computer with a static IP address that computers call the master peer (Yes word game).

  (2) If you can not afford a computer with a static IP address, you can just create a peer that responds to requests, "are you the server?  Yes, it is easily hackable, but when that you debug, your friends will not be assholes.

  What I want when I contact Cirrus is:

  (1) a list of IP addresses of connected peers.

  And if anyone has the example code:

  (2) the ability to send a "Hello World" to all peers.

  Is this achievable in Cirrus?  Stratus could do.

  the only difference between "Stratus" and "Cirrus (codename)" is the name.

  Cirrus never had a 'peer connected list' function, nor has he ever reported numbers of peers connected in ActionScript IP address/port.

  the example program VideoPhoneLabs has always required some sort of external registration service to register a peer ID for a name and find the ID of peers for a name.

  It is possible to make P2P with Cirrus and no active web server using RTMFP groups (NetGroup, GroupSpecifier and friends). I posted examples of my labs at MAX for years that implement chat and other functions using only of Cirrus. and you can do P2P with groups on a local network with no server at all (not even Cirrus).  See this thread:

  http://forums.Adobe.com/thread/766959

  links to my MAX 2009 and 2010 laboratory materials. and come to my session at MAX this year where I'll cover "Advanced P2P with RTMFP: tips and tricks".

• Is there a way to get the data for submission of form of eloqua using the REST API?

  I was wondering if there is a way to get the data for submission of form of eloqua using the REST API?

  Thank you

  On the page that egan related, there is a 'RawData' field for FormSubmit activities. In this area, the raw sending the form query string is returned.

  Whatever it is, you can get this info from the activities of the API block, or the endpoints data Rest API.

• DLL for LabWindows/CVI 8.0 with the bool data type

  Hello

  I want to use a new SWIR camera in LabWindows/CVI 8.0 (Windows XP 32bits).

  The company delivered with the camera produced a 32-bit dll by using Microsoft Visual C++ 2010. The .dll and .lib and .h files include a working SDK/API (some functions with the bool data type)

  Compilation-online syntax error, variable Boolean is not a data type in LabWindows/CVI 8.0

  Generate the import of DLL-online syntax error library

  I tried to convert bool char (typedef unsigned char bool => no more syntax error but the functions does not work.)

  What can I do?

  Martin

  Hello again, Naumann!

  Microsoft Visual C++ 2010 represents Boolean using 1 byte, as stated by MSDN: https://msdn.microsoft.com/en-us/library/tf4dy80a(v=vs.100).aspx

  I guess that you import C++ functions using the syntax for extern "C". Otherwise, because of the C++ name mangling wouldn't you able to bind C++ library against your code CVI.

  You can also specify how you import C++ functions?

  In addition, because you have not described the problem as a corruption of heads or runtime error, I guess the C++ library function is called correctly the CVI. That said, I tend to believe that the problem is not really in the mechanism of interaction of C/C++, but in the C++ library. If you would start calling a dummy C++ function returning an integer from a simple CVI application that should work, because redefine bool in CVI 1 byte must ensure that settings are correctly transferred onto the stack.

  If you need to create a wrapper function of C++ that is not using bool and calls the C++ function, I expect to return the same result.

  Maybe you are missing a few prior initialization steps required? The provider of the camera also comes all example code?

  Best regards!

  -Johannes

• Are there examples of good code for the display of the preview in the window images?

  I can understand more about the use of folio. xxx, but can not find good examples to use for the preview images.  () Folio.getPreviewImage I tried without success.  Oh, I should mention that it is version 2.  Many examples for version 1.

  Maybe if I get a little more specific.

  I call upward folios through:

  {adobeDPS.libraryService.folioMap.addedSignal.add (function (folios)}

  for (var i = 0; i < folios.length; i ++) {}

  addFolio (folios [i]);

  }

  (}, this);

  Finally, it works in a function where I am collecting and folio data display:

  var productId = folio.productId;

  var html = ' < div id = "" "+ productId +" ">" "

  HTML += ' < a href = "#" > < img class = "shadow" width = "120" src ="border = 0 / > < /a >."

  HTML += ' < br / > < span class = "bold" > ' + folio.title + ' </span > ';

  HTML += ' < / div > "

  it. $el = $(html);

  Folio.title works very well pull up the title, but I can't use folio.getPreviewURL in v2.  Should what code I use to set the src to the preview image?

  Thank you

  Have you looked at the default implementations of the library?

  Based on rendering of FolioItemView, there is a function (follow nested functions!):

  setTimeout (function () { scope. loadPreviewImage()}, 100);

  He referred to this feature (it does not copy):

  	loadPreviewImage: function() {}
  		If {(this.el.parentElement)
  			transaction = this.folio.getPreviewImage var (135, 180, true);
  			transaction.completedSignal.addOnce(this. getPreviewImageHandler, ce);
  		}
  	},

  Go deeper in the getPreviewImageHandler function is where you see the url value...

  If (transaction.state == adobeDPS.transactionManager.transactionStates.FINISHED & transaction.previewImageURL! = null) {}

  it. $el.find (".folio-inch") .attr ("src", transaction.previewImageURL);

  Is also in the code example to provide a preview when the Adobe API is not available:

  (In the service of rendering)

  var json = this.model.toJSON ();

  $folioThumb.attr ("src", json.libraryPreviewUrl);

  If you make any changes to the location of the preview display, you can just replace the class ".folio-inch" to what the class (or id) is the element that you are wanting to render the preview in.

• Are there examples of niScope send software trigger edge

  This is the sub VI:

  

  In my case, PXI-5105 and 6368 are used for the acquisition of synchronization. Post_trig_event and pre_trig_event of data are needed to analyze what analog channel has abnormal evolution. The trig source is not unique, which include several analogue channels. I therefore prefer to use a software to process a lot of data to channel to find the abnormal change and then send a trig signal, which means a trig signal to the PFI or the PXI_Trig. I think that the noScope that send software Trigger Edge works. Can you give me an example of this subroutine VI?

  I've attached an example that uses a software trigger to trigger an acquisition.  The code shows how to use the "niScope Trigger.vi software Send."

  Description of your request, it looks like you want to acquire data continuously and perform a top treatment in LabVIEW to determine when send software trigger.  This can also be done, and I would recommend starting with one of our continuous streaming of examples, like "niScope EX Fetch Forever.vi", which can be found using the example Locator OR under material input and output > Modular Instruments > NOR-SCOPE > Acquisition continues

   

  
  I hope this helps!

  -Nathan

• Why are there several layers of folders 'Application Data'?

  Why does Windows 7 Professional x 64 creates structures of files like this:

  C:\Users\Settings\Application Data\Application Data\Application Data\Application Data\...

  and so on for several levels? For example, one of the user accounts on my computer has 6 six layers of Application Data files. And each Application Data folder is identical under folders, including a subfolder of Application data that leads to the next level of data Application, etc. etc.

  Is it normal for Windows 7, and if so, what does that mean? If not, is this a sign of a problem?

  Thank you for your understanding.

  I finally found my answer.

  Application data 'folder' keeps reproducing itself as a subfolder when you change the permissions for the Application data folder, usually giving you full permissions to the c:\users\ folder. It's exactly what I was doing.

  The Application Data folder is a crossroads, that points to the parent folder.

  C:\Users\\AppData\Local\Application Data\

  points to

  C:\Users\\AppData\Local\

  Spawning occurs when permissions for Application data 'folder' (junction) are changed. Application data must have the following permissions:

  Deny - all - list folder / read data - - this folder only

  Cela (wisely) to avoid recursion when a non Windows 7 aware application scans the Application data 'folder', and this is also the reason for the "Access denied" message you get on some folder in c:\users\. This leads some people, like me, to take complete control of the folder. I should know better.

• Are there examples of portfolio more than the standard ones?

  I was wondering if there are examples more than my Portfolio, also updates page five example provided on the Web site (Adobe portfolio|) Build your own custom Web site)? Cannot find anywhere, which must be due to the fact that this service has just been announced. I would like to see some examples of real customers of CC. Thank you.

  I use DuckDuckgo as my research. I searched on "myportfolio.com", and it was in the returned list.

• Are there examples on how to use ProvisioningService.getProvisionedAccountsForAppInstance ()?

  I'm trying to find an example on how to use ProvisioningService.getProvisionedAccountsForAppInstance ()? (IOM API) without success.

  TIA

  Leo

  Hi Leo

  How are you? Fine? Me too.

  Here is a simple example for you, because I think that the javadoc is not clearly too.

  First of all, you need an instance of the application name. Yes. Not the digital id that was supposed to uniquely identify. The name. You'll like this.

  AppService = oimClient.getService (oracle.iam.provisioning.api.ApplicationInstanceService.class) ApplicationInstanceService;

  Sc SearchCriteria = new SearchCriteria (ApplicationInstance.APPINST_NAME, APPLICATION_INSTANCE_NAME, SearchCriteria.Operator.BEGINS_WITH);

  HashMap vals = null;

  List = appService.findApplicationInstance apps (TS, vals);

  for (ApplicationInstance app: apps) {}

  System.out.println (App.getApplicationInstanceName ()); This one

  System.out.println (App.getApplicationInstanceKey ()); not this one

  }

  Fine. You name? Not the id, do not forget that. Now, follow these steps

  ProvisioningService provService = (oracle.iam.provisioning.api.ProvisioningService.class) oimClient.getService;

  HashMap hm = new HashMap();

  Sc2 SearchCriteria = new SearchCriteria (ProvisioningConstants.AccountSearchAttribute.ACCOUNT_STATUS.getId (), "Configured", SearchCriteria.Operator.EQUAL);

  The list of accounts of = provService.getProvisionedAccountsForAppInstance (thatName, sc2, hm);

  Hooray, you have all put accounts in service!

  What happened to all the accounts? Filters to null, of course

  The list of accounts of = provService.getProvisionedAccountsForAppInstance (thatName, null, null);

  I hope it helps you, Leo. But remember, you still have a lot to learn. It is not documentation. It's you.

  See you soon

  Leo

• Are there examples of what the iPad screen looks like the enterprise level without storefront with a banner of entitilement?

  It seems that all the magazines I opened that DPS has a store front. We want a subscription button to ours with a banner of law, and would mask the iOS subscription. I would like to see some visual examples of this. We are going in this direction and I would also like to know what other resources I should so I can get the design work carried out before the launch. Y at - it a tutorial Adobe TV, I can look at? I read this page: https://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

  Can you direct me to more resources?

  Melissa

  Here is an article on creating a proof of concept apps:

  Creation of Concept Apps for DPS validation | Adobe Developer Connection

  After you build your application development, let us know if you have any questions.

• are there examples of code for services 2.0 web?

  I've implemented insert/update/delete in all flavors with the 1.0 api. I try to use version 2.0 api with c# .net and am not finding any code in the example. I don't need a lot, a sample of a work in c# for web services 2.0 query would be nice. The web services guide does not exactly help here.
  
  Thanks in advance for any help.
  
  JJ

  Here is an example of a query on a custom object

  iceCustomer.CustomObject4 ice = new iLink.iceCustomer.CustomObject4 ();
  ice. URL = session. GetURL();
  iceCustomer.CustomObject4QueryPage_Input iceQryInput = new iLink.iceCustomer.CustomObject4QueryPage_Input ();
  iceCustomer.CustomObject4QueryPage_Output iceQryOutput = new iLink.iceCustomer.CustomObject4QueryPage_Output ();
  iceQryInput.ListOfCustomObject4 = new iLink.iceCustomer.ListOfCustomObject4Query ();
  iceQryInput.ListOfCustomObject4.CustomObject4 = new iLink.iceCustomer.CustomObject4Query ();
  iceQryInput.ListOfCustomObject4.CustomObject4.AccountId = new iLink.iceCustomer.queryType ();
  iceQryInput.ListOfCustomObject4.CustomObject4.QuickSearch1 = new iLink.iceCustomer.queryType ();
  iceQryInput.ListOfCustomObject4.CustomObject4.QuickSearch1.Value = "" = ' "+ DbReader.GetString (0) +" ' ";"
  iceQryOutput = ice. CustomObject4QueryPage (iceQryInput);
  If (iceQryOutput.ListOfCustomObject4.CustomObject4! = null)

  This is an insertion

  ImportTx.CustomObject6 Tx = new iLink.ImportTx.CustomObject6 ();
  Tx.Url = session. GetURL();
  Entry ImportTx.CustomObject6Insert_Input = new iLink.ImportTx.CustomObject6Insert_Input ();
  ImportTx.CustomObject6Insert_Output output = new iLink.ImportTx.CustomObject6Insert_Output ();
  entry. ListOfCustomObject6 = new iLink.ImportTx.ListOfCustomObject6Data ();
  entry. ListOfCustomObject6.CustomObject6 = new iLink.ImportTx.CustomObject6Data [1];
  entry. ListOfCustomObject6.CustomObject6 [0] = new iLink.ImportTx.CustomObject6Data ();
  entry. ListOfCustomObject6.CustomObject6 [0]. Name = (DateTime.Now.ToString + ":" + txType);
  entry. ListOfCustomObject6.CustomObject6 [0]. Description = transaction;
  entry. ListOfCustomObject6.CustomObject6 [0]. CustomObject5Id = iLinkImportKey;
  output = Tx.CustomObject6Insert (input);

  Beware, it's that there is no support for the child objects with Web Services v2.0.

• If I want to be an importer of the image by image, for example - for WebP image format, I set up a SDK importer plugin? Are there examples?

  The title says it all really. Wondering if there is a simpler interface to implement that contains no video or audio, but just a still picture frame.

  I don't care about the export of this format of first, just to be able to read a single image or a sequence of images to use as images.

  Hi Rotem,

  A standard importer plugin is the way to go for an importer of still images.  You could start from SDK_File_Import in the SDK.  There is also a plugin WebM on GitHub:

  fnordware/AdobeWebM · GitHub