Reference Dell next Business Day Support Provider Uny

Similar Questions

• What is 'Next Business Day Support'?

  Hello

  I would like to know what it means 'Next Business Day Support'. Does this 'day business on-site"identical or something else?

  For the moment, I'm interested a Latitude Dell laptop refurbished on the ebay.co.uk and the portable real is in the United States. The inscription says that there 3 years manufacturer's Dell warranty. When I asked the seller to this topic, what I are unclear responses.

   

  "The way in which the guarantee was designed by Dell is that it must be registered using a USA based address."

  Above was the first answer I got. And after further question, I got this.

  "That's all this we know: according to dell it is: 'Next Business Day Support' January 2017"

  I don't know what it means exactly 'Next Business Day Support'. I know that it guarantees are called 'Day working on-site' and "Next Business Day ProSupport", but never heard of "Next Business Day Support'. Is this something new?

  As I am in the United Kingdom and the laptop is in the United States, the guarantee should be transferable after purchase. And I heard that only 'Service business day following on-site' is transferable on the international scene.

  Could someone throw a light on the issue?

  Thanks in advance.

  LealMusic,

  UK USA warranty transfer can be difficult on a system that we have sold. 10 x difficult for resellers. USA and UK guaranteed specifications differ and can not transfer. These ebay sellers move computers from one area to another without any real knowledge of our policies. You could get a laptop from them that initially sold off Japan Dell. My advice, find the phone you want on the Dell UK Outlet site, NOT a seller on ebay. Our site will explain your warranty offerings.

• Reference Dell V715w printer is supported on Windows 10?

  I'll upgrade to Windows 10. My V715w printer will work, or will I have to replace?

  Rick, I upgraded from Win 7 to Win10 today. I kept all my files and settings. The V715w worked immediately. Do not reinstall or change settings.

• Reference Dell - never!

  I bought two computers in July 2009. I had problems with both of them. Inspiron mini had a problem with wireless, Dell said was my fault. and refused to fix it until I told them. I wanted to return it them. Finally they gave me a free support and support person said that there is something wrong with the computer I received.  Something other than the computer is unbalanced and wobbles when he types. I sent the compture to get fixed and it never got fixed.  I thought I would just deal with it because you get what you pay for.

  In January my XPS studio crashed. Screen has become sell contact of Virgin material and the damage. So I called dell. It took them a month to figure out, and indeed there is something wrong witht the computer. Thus broke computer I couldn't use it for a month. Finally I got the new memory and hard new dirve. The next day, my computer crashed. He spent a month trying to say Dell that something was wrong with my computer. All that time I spent 30-75 minutes on the phone with technical support. It was time that I called 4 days a week. I bought long and costly warrenties on my computer, including hardware and software. Not to mention cell phone chargers. Finally I conviced someone as my computer is really broken and they agreed to send me another computer. I'll go at least a computer that works. Understandable that it would take some time to get my replacement. My replacement date came and went. I called Dell again 45 minutes on the phone.  Then I've been transferred several times. The rep that I talked to said that they have not yet started doing my replacement.  It has been frustrating and I think that he was treated in a disrespectful way, what happened to quality customer service.

  On top of that today I was warned that even if the company has already approved my payment of $ 1,500, they now can't seem to find a record of the transaction and consider my past due account.  Also, they refused to refund my money and couldn't give me any assurance that the situation would be resolved.

  Anyone has any advice on the purchase of an Apple, I hear they have great customer service and wonderful tech support.

  I just wanted you to know that you aren't the only one with all these problems.  I am struggling with for more than a month to replace my computer. Finally, on March 1, they said they would and they have placed an order.  Now a week later it stil is not delivered because they can't find a 'HARD' for my computer.  REFERENCE DELL SUCKS AND I WIL NEVER BUY ANOTHER.    I put a post of "do NOT GET ALL the ANSWERS.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Reference DELL demanding $80 for a share of $5.90

  Laptop Inspiron 5758 bought April 2015, had the power switch replaced under premium support Oct - 15, 2 days after the end of my premium (to July 19) support switch has not yet. Card replacement (of the power T2CVC button) costs between $5.90 and $15, but is out of stock on every site I can find. Reference DELL tell me or send my laptop to be fixed @ $169, either to buy the small Board that DELL has a monopoly on cost me $85 (Anurag Srivasava3 July 21, 12 h 50 HE)

  This is outrageous, this is a new laptop and I expect at least Council (oct-2015) replacement work would be covered or DELL would have at least the care that I have a computer DELL with a hardware fault rather enjoy my situation and make huge profits that they would send me a part at normal price.

  Check out this link.

  Dell Inspiron 17 (5755 / 5758) power of button with cable - T2CVC

  They can notify you when it's back in stock...

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.

• Reference Dell all-in-one printer 922-is not recognized in windows 8

  Dell all in one 922 printer works is not in windows 8

  Hi Linda,.

  You can visit the link next to the Windows Compatibility Center that describes the Dell 922 Photo all-in - one Printer is not compatible with the Windows 8 operating system:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Dell%2Ball%2Bin%2Bone%2Bprinter%2B922&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  However, you can try to install the printer in Windows 2000 or Windows XP compatibility mode and check if this solves the problem.

  Reference Dell Photo All - In - One Printer 922, v.G21, A04

  http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R102523

  To install printer drivers in Windows 2000 or Windows XP compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select available options under Windows 2000 or Windows XP .

  e. click apply and OK.

  See the link below for more information about compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Let me not to renew my annual subscription ACROBAT PRO DC expiration in the next 30 days.

  Let me not to renew my annual subscription ACROBAT PRO DC expiration in the next 30 days. I searched for a way to do online, but concluded, always eventually be directed to support. How should I proceed?

  In case you are unable to contact to support using the link provided, please confirm if you want to cancel the next CC.

  Acrobat Pro DC subscription (annual)

  Subscription Office

  26/06/2014

  Concerning

  Baudier

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference Dell 2007FP vs HP zr22w

  Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.

  Reference Dell 2007FP (handed to nine 30-day warranty) $95

  HP zr22w (new, 3-year warranty) $175

  What would be a good choice?

  Not for the game.

  But need good color, good text, Word process, sometimes a movie.

  The HP zr22w DP, is better than the VGA to connect to my T410s?

  

  Thank you!

  Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

• Reference Dell WinPE 5.0 driver CAB

  I have SCCM SP1 R2 and the Dell customer integration Pack 3.1 2012.  When I try to import the ACR 5 of WinPE from the SCCM console, it fails with 'the selected driver package is incompatible.

  Does anyone else have this problem?  My understanding is that SCCM R2 supports Win 8.1, which is what Win PE5 comes.

  Thanks in advance

  Tony

  Hi Tony,.

  Reference Dell Customer Integration Pack 3.1 is not support SCCM SP1 R2 2012. CAB WinPE cannot be imported via CPID 3.1 and it has to be injected for the boot image. Also try the last 5.0 WinPE that is available in the link below

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/5029.WinPE-5-0-driver-cab.aspx

  Thank you

  Pascale Raja

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd