Are there guidelines on the best way to set up multiple users?

Similar Questions

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• Best way to set up multiple iPhones within the family?

  We have 3 iPhones in our family, and we always use the same Apple ID for all three devices.  I understand there was recently some changes to ios, and this strategy may not be the best way to have things to put in place now.  I started seeing a strange behavior between phones, with calls/texts appear on the phones of other people.  Doing some research, it seems that perhaps we should all have separate Apple ID and then go the family share the road, so I was hoping someone could explain clearly how can I do to set this up.

  Right now I have my ID Apple we use for purchases, and it seems that we use an old account @me.com for our iCloud account... which I suppose is what has allowed us to share calendars, see all our devices to find my iPhone, etc.  My ID Apple is not the same as the address of the iCloud account.

  I work in it and myself usually as a guy... pretty strong goal, I will admit that all these Apple and iCloud IDs confuse me... so any help is appreciated.  My main goals here are:

  • Be able to see the locations of all the people of my family
  • Have no other phone calls/texts/etc
  • To share and be aware of purchasing iTunes on all devices
  • I have set up, Music Match on my Apple ID (I think...), so I don't want to lose this functionality across all devices
  • Share a family calendar that we do today (and I hope not to lose what is currently implemented)

  Thanks in advance!

  Add to this... I just looked at the option icloud on my phone and it shows my address @me.com as a principal and an address of @icloud.com as a verified.  My apple account is my gmail address, and my wife and daughter use their gmail as their primary e-mail accounts.

  So I was wondering if I should put in place of the apple for each of them using ID addresses gmail... then we would all have an identifier associated with our gmail addresses apple.  If this is the case, how to set up the account icloud?  I can leave it like that, or should I set up with my gmail account, as my apple ID?

• Need advice on the best way to set up a 6 nic Server

  I have a server with 6 cards.  Looking for some suggestions on the best way of provision.  We use the software iscsi client.

  Here's what I think to do:

  0/2 NIC (one onboard and a pci): VmNet

  1/3 network interface cards (one on board and a pci): vmkernel: vmotion/service console

  approx 4/5 (pci): vmkernel for software iscsi

  Is there a better way to do it?  It's just the way I'm used to doing.  It would be nice to maximize the number of ports used for iSCSI.

  Thank you!

  -shane

  Tough call...

  If you lose the management network, HA will cause a failover.

  If you lose the iSCSI, all virtual machines fail, but HA will not switch.

  If you lose VM network, all communications from the virtual computer fail, but HA does not tip over.

  If it was me, HA failover is a better option than full scall VM failure or net VM...

  But now, you will get twelve opinions on which is better.

  Dave Convery - VMware vExpert 2009

  ************************

  Accomplish the impossible only means that the boss will add it to your regular tasks.

  Doug Larson

• What is the best way to create a limited user account?

  I'm trying to set up a user account which only allows access to the media, optical drive (read-only, if possible), programs 3 cards and records in a folder that is not visible to this account. What is the best way to go about this?

  Thank you!

  Hello

  You can check the links that has information about the types of accounts of user below.

  Types of user accounts: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_c_account_types.mspx?mfr=true

  Overview of user accounts: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/usercpl_overview.mspx?mfr=true

  How to create and configure user accounts in Windows XP: http://support.microsoft.com/kb/279783

• The best way to set default styles in the libraries of widget for use by the public?

  I am putting together a code to go with my blog, and it will include a custom component. I would like to than the default component to use a style that I set, but I also want the user to be able to replace it easily. Anyone have any suggestions on the best way to do it?
  
  I see that the range slider [url http://www.jidesoft.com/blog/2011/10/04/meet-our-first-javafx-component/] of JideSoft we explicitly setting the skin in code in their example. Ideally the end-user would not do that. So, what is the best practice? Should I create a skin for my component and then set the style in my code? Should I set a basic style sheet that somehow always is imported, etc.?
  
  Essentially, I want to have my base of work styles in the same way that caspian.css is - is possible?

  I gave a talk at JavaOne on creating custom controls, perhaps the slides can be useful in answering some of your questions. I blogged about my three talking:
  http://fxexperience.com/2011/10/slides-from-JavaOne/

  In particular, you will be probably more interested by the following slide deck:
  https://oracleus.WingateWeb.com/published/oracleus2011/sessions/24140/S24140_2556650.PDF

  Hope that helps,
  -Jonathan

• What is the best way to set permissions for the DNSAdmins?

  If applied to the object in ADSIEdit adminsdholder MicrosoftDNS will reset permissions?

  We want permissions to be consistent in the whole area and our areas our ineritting DNSAdmins not when we create them.

  Hello

  That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• What is the best way to set up a key of my emulator configuration?

  I have a pc game controller which is an exact equivalent of the Playstation gamepad.

  I always use it when playing games via the Nintendo 64 emulator on my pc.
  What is the best configuration of key to use?

  Try this .
  this or
  Does that help?
  Josh Luitjens - self-taught computer Techhttp://www.pchalp.com/

• What is the best way to set a built-in webcam?

  My phone fell recently on his side of the counter for hardwood floor. My laptop (HP Pavilion g6) survived the fall and has seemed to suffer only a minor chip on the upper left. Everything seemed to remain as it was before the fall. The next time I tried to use my webcam, however, seems to be zoomed in its entirety and not in the update. When I place my thumb on the camera, it changes the lighting for a second before returning to its original state blurred. I think that the webcam is still working but perhaps has been jumped or moved? What is the best move for me to have this problem?  I lack the idea of buying an external webcam.

  Hi krissy2314,

  As mentioned by Hula_Baloo in the previous post, you need to contact the manufacturer of the computer for help because it is an built-in webcam.

  See the article-

  http://WWW8.HP.com/us/en/support-drivers.html?JumpID=ex_r11400_us/en//IPG/_ps_g_hpsupport/support&k_clickid=AMS | 13. 49711 | 6c4926f7-3e17-8788-b2d6 - 00003475191c

   

  Hope this helps!

• What is the best way to set up EA6400 with WRT54GP2 to network home?

  We must keep the WRT54GP2 router with VOIP telephone service.  Any help would be appreciated.  Thanks, n

  Hi nikki2819. I suggest that you configure EA6400 as a secondary router via a LAN - WAN connection with your WRT54GP2. In this way, the EA6400 router can function as a router for full commitment and can have its own network, while the other router can focus on the VOIP line.

  Check out this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...

• What is the best way to set a default value on an attribute that is dependent on a query?

  Hello master,

  I use Jdev 12.1.2. I have a project requirement where I have to set a default value for an attribute. The default value is derived from an SQL query.  I was intending to set the value of the Create method of the entity using VO class. But I preferred to have an opinion on if I do best.  Please advise

  Thank you and best regards,

  Mohamed

  It is a logical place, so just go ahead with this...

• What is the best way to create a bookmark for a user to return?

  Hello to all... hello again Steve... I'm back with another question - what is the best way to set up a bookmark system so return users can pick up where they left off in a lesson of AW? I tried the usual internet research, always do, but a few samples and answers I found were AW5, not a lot of help...

  I have a dozen or so cards attached to my frame, I would like a user to return to the last card that he read before the close. (My AW communicates very well with database Access, so if passing a variable to access and back to AW when begins the lesson is on track, let me know...) If the answer here is too complicated, perhaps pushing me in the right direction and I'll me dive in.

  Thanks in advance to all those who have some tips, I really appreciate it!

  Terry

  Try this overview, see if it helps...

  Enter a reference to the map as you enter, then save to the database when you exit.

  You want something that will give you the equivalent of a page number - if you have 7 cards hung the setting, and the user is in the 6th plan when it stops, you want to save the number 6.

  There are dozens of ways to do it, but probably the easiest way is just to attach a calc to each card that has this code

  (I do not have Authorwar very convenient to check the syntax, then you should check out!)

  BookMarkPage = ChildIDtoNum (IconParent (IconID), IconID)<-- tells="" authorware="" to="" return="" the="" "page="" number"="" of="" the="" current="">

  Save BookMarkPage in your Access database to the exit.

  In return, read the bookmark in BookMarkPage, ask the user if he wants to go back to the bookmark. If so, use a calculated navigation that uses

  ChildNumToID (@the of your frame name or its ID, BookMarkPage)

  Note that you could argue something similar by recording the your card, the IconTitle or IconID but these two can break if never update you your file by adding or removing pages, renaming etc. With this method, all you need is a simple page County check that makes sure you don't try to nav for a page number that does not exist (use IconNumChildren).

  Steve

• What is the best way to configure the Cisco IOS password?

  I'm under 15.2 (4) IOS on a router in 1921

  What is the best way to set up the password of the router?  I already tried once and managed to block me on another switch.  I would use the most secure method that encrypts the password.

  Current config:

  username admin privilege 15 password 0 cisco123

  Hey Kevin,

  Use the secret keyword instead of the password for the password more secure and encrypted.

  The syntax that you are using will display the password in clear text.

  R1 (config) #username, 0 privilege 15 password test
  R1 (config) #exi
  R1 #sh runn
  * 00:00:25.523 Mar 1: % SYS-5-CONFIG_I: configured from console by console
  R1 #sh runn | in test
  username password 0 privilege 15 test
  R1 #.

  If you use the keyword secret then it will get encrypted.

  R1 #sh runn | in test1
  username privilege 15 secret 5 test1 $1$ PV6g$ sGMYxxmW8hD9Cdy7TsmHF0
  R1 #.

  Concerning

  Knockaert

• 27gig upside down footage, the best way to change? Flip export then re edit or what?

  Hi guys, I went on a ski hol recently and have 27gig down on a helmet camera footage, I'm really stuck on how best to modify, it is filmed at 60 frames per second at 720. Not sure if reverse all export and import the correct path upward and start editing from the source and, if that would be the best way of setting export to keep the out put to the same settings. Thanks in advance

  To .avi I would try uncompressed (none), UT or Lagarith.
  All them is likely larger than your original files,
  but that's the price to pay for shooting backwards.
  I favor uncompressed (none)... the files are a little smaller.

  For Quicktimes, component or uncompressed without loss.
  The Avid DNxHD codec becomes good review of quality depending on the size,
  but I don't have any direct experience using it.

  You could experiment with high speed I-frame only MPEG files.
  and modify your own encoding settings to get what you want.

  First, I'll start with a short clip and experiment with your results.
  Some formats can read for you more easily than others,
  and you don't want to encode alone to find reading
  is not what you expected.

  Good luck and happy flipping file.

• What is the best way to ensure that there is no virus

  Hi guys,.

  Thanks for your reply,
  I believe that my laptop has a virus or spyware. It is slow and take ages to get up. Also during the use of internet Explorer is very slow in browsing the internet.

  During the use of msn chat voice sometimes it freezes.

  What is the best way to be sure that there are no viruses.
  I already have Norton 2007 with the last update.

  Thank you

  Hello

  > What is the best way to ensure that there are no viruses?

  The best way is to use an Antivirus application and some Anti-malware and Trojan applications.
  You already use the Norton Antivirus program. It is very good. Remember that this application is always up-to-date.
  Additionally, you could install Adaware. It is freeware tool and it scans your operating system for malware.

  But the virus or malware is not always a reason for a BONE of freezing.
  Please check your processes that are run in the context of the BONE. You can also use the application called CNettoyez.
  It scans you BONES of this situation and repair the registry.

  Maybe it helps