Satellite M100-180: keys Fn does not & cannot add Kubuntu

Similar Questions

• Satellite M100-191 - right speaker does not work

  Hello, I have a Toshiba Satellite M100-191 with Windows 7 Ultimate 32 bit installed. It's that everything works well except the right speaker on the laptop, the same phenomenon occurs when I plugg the headphones, no sound on the right.

  I did not change hardware or BIOS update. I use the latest audio drivers from Realtek, codec for HD Audio Codec Driver version 6.0.1.6649 ALC861, which I downloaded using this download link: [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level= 4 & Conn = 3 & DownTypeID = 3 & GetDown = false], but no change.

  I even tried to play with the sound, management options in the control panel as well as the related with the sound, special function keys to see if the problem got away, but it does not solve the problem.

  Perhaps the sound card has a problem with its chipset and needs to be replaced?
  I have two laptops, one Travellmate and one with Win7 Ultimate eMachines e620 and have no sound problem.

  Any help or sugestion that you guys have would be very apreciated :)

  Hello

  Have you this problem appears in the past using other Windows such as Win XP or Vista system?

  > Perhaps the sound card has a problem with its chipset and needs to be replaced?

  The dysfunction of the sound card/chip would be the worst case, because in this case the motherboard needs to be replaced so I hope that s is not a hardware problem.

  Select this check box.
  Go to control panel-> sound control
  On the reading tab, right-click on the speakers.
  Now new called speaker Properties window should appear.
  Here, choose tab called level and click the Balance button.
  Now, check if both controls are put right.

• Satellite M100-221 - energy saving does not work - fatal error

  My laptop Satellite M100-221 the energy saver is not woarking. I get this annoying message:
  http://up109.arabsh.com/s/42gi7dkhum.jpg

  I try to reinstall the driver, and towards the end of the installation a message appears:

  C:\Progra~1\Symantec\S32EVNT1. DLL. a virtual device driver installable failed initialization of Dll. choose 'close '? to complete the application.

  Satellite M100-221 belongs to the series of PSMA0E.
  Toshiba page European pilot plans and pilot Power Saver and the Power Saver utility.
  I recommend first of all remove the system energy saver.
  Then after reboot to clean the BONES and the registry using the CCleaner.
  Then, install the driver Power Saver 2.40.0.1C and Power Saver, utility 7.03.07.C

  Good luck

• Satellite Pro 6100: keys Fn does not

  Hello

  Ive got a laptop Satellite Pro 6100. IM of problems using the secondary function keys (I'm not sure what they call them!). When I press the function (Fn) key, the light below the F10 button as it should, but when I press one of the brightness of i.e. F up/down buttons, nothing works!

  I had a quick glance at some of the tool and using keyboard in the Control Panel, which suggests that the driver may be incorrect, so I tried looking for an updated driver, but windows says: I have the latest version of the driver.

  Anyone else have this problem with the SP6100? Can it be fixed? If so, how?

  Any help would be great.

  Thanks - Kavi.

  Post edited by: kavi

  Hello

  Even the windows said that you are using the latest drivers, you need to reinstall the drivers.
  First remove emulator utility Hotkey to display Add & Remove programs.
  Reinstall it modules common Hotkey Utility Emulator for display devices.

  Hope it helps average known us if it works or not

• Satellite P100-180 - firewire card does not work

  I can't get my laptop to recognize I have connected Sony PC110E mu.

  In case it was the card in the laptop that was wrong, I bought a firewire card VIA, but the laptop still does not recognize the video camera.
  Is there a problem with XP and Firewire?

  Did you test another device on the Firewire card or the Firewire card in another phone?
  Maybe you use old drivers or maybe they aren't installed (yellow marks in the Device Manager).

  Have you installed SP2 or SP3 for Windows XP?

• Satellite Pro P300 key media does not

  Hello world.

  The media keys (play, pause, stop, etc) on my P300 have stopped working, I suppose, that a driver is down somewhere after a windows update or something?

  Nobody knows what the drivers are called for the multimedia keys in order to reinstall them and see if that solves my problem?

  Thank you.

  Hello

  I assume you mean on the Toshiba control buttons.
  These buttons are controlled by software Toshiba controls using Win XP or value-added Package using Vista.

  I put t know what OS you have, but according to the OS you use, you need to reinstall one of the applications mentioned.

  Good bye

• Satellite M100-180: put wrong password - error now 'system off 65017 '.

  I had technical problems with my Toshiba Satellite M100-180.

  Let me tell you a story.

  I bought my laptop on 13/12/2006 model is Toshiba Satellite M100 - 180 T2600 (2.16) G 1/100; Card mother HAQAA.

  So, a month ago my laptop could not start due to asking me a password. HM... I never put the password on my laptop. So, I had brought my Toshiba at the center of service to this problem. So they tried they couldn't achieve success even if they strap the CMOS_CLR1.

  Triple entering the wrong password my laptop gives this message: "system disabled 65017." So, as my Toshiba warranty is the guy in the service center have offered to replace the motherboard.

  It seems too expensive, given that I could buy another new laptop (okay, it will, no doubt) for that price.
  Really, I don't like this idea, because it's too expensive and I like really my laptop.

  The guys in the service center said my private that, most likely, there is the content of the EEPROM was twisted. And if I'm going to find the same other portable executables, they could use his image from EEPROM to save my Toshiba.
  So, the question is.

  Where to find this EEPROM image that fits my phone or how to solve the problem?

  Please, help me, it's a question of work and success.
  Please, I beg you. I'm really in despair...

  I know you answer.

  Hi mate

  I think the guy meant the ROM module that is part of the motherboard and BIOS there maybe stored such ROM module needs to be replaced and would avoid the replacement of the motherboard
  But this is only my personal opinion

  Maybe you could buy a second-hand M100 where the motherboard is not too bad then just the motherboard could be changed and would not be expensive as new motherboard

  Welcome them

• Satellite M100-180: installing drivers for Vista has no display

  Hello. I am from Russia and my English can be a problem. so excuse me.

  I have a Satellite M100-180.
  I installed vista on my computer and downloaded the drivers for vista for my laptop.
  But I have problems with display on the Ati Mobility Radeon X 1400 graphics card drivers.
  After installation the message that this driver installation. Please answer as possible))

  Hello

  Satellite M100-180 belongs to the series of PSMA1E. Please download the Vista GPU driver for the right series M100!

  Also on the Toshiba European page driver you will find BIOS especially designed for Vista.
  So if you want to use Vista on your laptop, you will need to update the BIOS.
  But be careful! Do not forget that you have chosen the good BIOS and the right update procedure because the incorrect BIOS may damage the motherboards ROM module!

  Secondly, the installation instruction txt file has been on the site driver of Toshiba. This txt file shows you the right direction how to install the drivers of Toshiba.
  The proper installation order is necessary and important. So please follow the guidelines mentioned in this document.

  Last but not least; the ATI drivers are also available for download on the * www.omegadrivers.net * site.
  The driver downloaded from this great short site on my laptop.

  Best regards

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Qosmio X 300-key Fn does not work

  Hello!

  My work does'nt-Fn button.
  I use Windows 7 Professional 64 bit and I downloaded & installed the value added package for Windows 7 64-bit.
  But my Fn key still does not work.

  So I uninstalled all drivers Toshiba again and reinstalled them.
  Nothing seems to work.

  What can I do?

  EDIT:
  I tried to find the Flash Utility card drivers for Windows 7 64 bit. But I can't find them anywhere!

  Post edited by: wuumbs

  > I tried to find map Flash Utility drivers for Windows 7 64 bit. But I can't find them anywhere!

  Of my knowledge Support Flash Card utility is not related to a specific model laptop.
  On my Satellite a series of laptop I installed Support utility of the Flash card that I found in the section L500 and it worked.

  Try this too maybe you control also the series which is more recent than L500.

• Reset password screen is coming and key board does not work

  Hello

  When I wake up in the morning and tried to start my mac pro 13 book he has not begun and this window appeared on the screen saying reset the password but unfortunately I can't type password as key board does not work... What to do now...

  

  Try to boot inSafe Mode and see if the problem persists?

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first.)

• Satellite M100-180: where can I find drivers for Win 2003 Server?

  We bought a Microsoft Windows 2003 server. I have install then on our laptop Toshiba Satellite M100-180 PSMA1E-02Q00WRU.

  With the laptop, I found Windows XP CD and Express media player recovery CD Reanimator. No disc drivers there. May be dealer lost drivers disk? If that - where can I get new CD of drivers (I am from Russia, Smolensk)

  I try to download the drivers from the web (toshiba.com.ru), but they are very large (I have a dial-up internet). Then I download driver modem (4M). Installation of the works, but no modem appear after that. And no serial port too.

  I plug the USB-serial converter and install Standart Modem (USR external). Then I have to connect to the internet and try to download the drivers with windows update. No results...

  HEEEEEEELP ME! :)

  PS Sorry for my English :)

  Hello

  : D the dealer nothing lost! The pilot tools & utilities can be created in the Windows XP operating system that came with the laptop.
  With the help of Toshiba, you will find a Protect & Fix tab and the option to create a driver disk ;)

  Further, all the XP drivers are placed on the page of the Toshiba driver. But unfortunately, nothing for Win 2003 server.
  Maybe test it works for XP drivers also on Server 2003

  To find the driver download page please go to
  http://EU.computers.Toshiba-Europe.com->-> support-> suport homepage & Downloads Download drivers

• HP pavilion dv2000 key board does not

  Hai

  HP pavilion dv2000 key board does not. I have activated the key online Board that also does not work. because my hp utility cd has been damaged, I changed my OS to windows 7 key board ultimate .the rest is notworking .then I used a USB key Board that works also do not. main problem is that I couldn't filled my Os Installation with to enter the pc name. Plese help me. the original OS was Vista.

  with our thanks

  Joseph

  Hello @pxj,

  I understand that your laptop keyboard does not work, and that your alternative keyboard does not work as well. I'd be happy to help you in this case!

  As your drivers available of the system does not contain the keyboard for Windows 7 drivers, I recommend you to get a drive recovery to re - install Windows Vista on your system. This can be done by following this document on getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• A key recovery does not!

  Hi all, as indicated on the title, my one key recovery does not work.

  Whenever I press the recovery button (the host files charges) and when it finishes, it hangs there.

  The first time I tried this it worked fine.

  The last thing I did was to put some files in my D drive (where all driver files are) and I tried to delete the files, I put and try again, but it did not work.

  Any help guys?

  
  

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.