27gig upside down footage, the best way to change? Flip export then re edit or what?

Similar Questions

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• The best way to change the red color to white?

  Can someone tell me the best way to change the red part of the label in this image for white? I'm having a hard time understand this point and I know there must be a solution simple or semi-facile. I have about 10 of these I need to change. Thanks for the help!

  

  Hi Sheera730,

  Please take a look at the following article, it should be useful: https://blog.udemy.com/photoshop-replace-color/

  Kind regards

  Tanuj

• What is the best way to change a column type in the materialized view?

  Hello my dear friends,.

  I want to change a column type in a materialized view. VARCHAR2 NUMBER, so what do you recommend? What is the best way to do it?

  Thank you

  You can not change the data type of the column while there are data in the MV, so you might as well give up and recreate the MV with a TO_CHAR() around the column in question in the application of MV to get the data exactly as you want (be sure to include an appropriate format mask). That said, I'm fighting to think reasonable grounds to make such a change.

• What is the best way to change the size of a design?

  I have an announcement in A4 format and need to change it to a bunch of different sizes, what is the best way to do it? Just making it smaller does not work because the text that it becomes small to read.

  Erica Gamet gave a great presentation on this topic (which creates several sizes of an ad in InDesign) to my user group earlier this year. There are two messages for Erica who explains how to put in place:

  http://creativepro.com/understanding-liquid-layouts-part-one/

  http://creativepro.com/understanding-liquid-layouts-part-two/

• What is the best way to change hosted on Bluehost site BC. but keep existing accts e-mail on BlueHost?

  My client currently has their old site and multiple e-mail accounts hosted by BlueHost. We are past to welcome his new Web site (created by Muse) on Business Catalyst, but they want to keep their existing e-mail accounts on BlueHost account. At first, I changed the names of servers on Bluehost so the site will host in British Colombia, but then noticed that their emails.

  I found some conflicting info but trying to research the best way to do it: they say that, so that email is not affected and continue to exist with BlueHost, I need to create a record on Bluehost with server names BC while the new site is in British Colombia. Another forum I found said I should change the name servers, and then add an MX record in Business Catalyst (but wouldn't that affect their current emails?). Thanks for all the tips on how to do it. I'm quite new in British Colombia.

  You just need to edit the record

  https://my.BlueHost.com/cgi/help/a_record

  Point web traffic in British Colombia only.

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• How is the best way to change the label of an icon on the home screen

  When I place an icon on the home screen I want to change the label, I wish it were.

  I don't see in an integrated way to do this.

  You can name a bookmark all you want, but when you a site now pressure on the home screen and click on Edit, bookmarks are not always suggested as matches. The only way I can assure you that a referenced site is listed is to add some unique characters for the name of the bookmark that don't arise in the history of this site. Of course, this is taking away total control...

• What is the best way to change this program and to read 1 sample of each channel?

  The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?

  A BNC-2090 is just a connection block.  It has no effect on the question of whether you should use traditional DAQ or DAQmx.  Which is determined by the DAQ card that you are connected to the terminal block too.

  You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.

  What problems are you having with the new VI you just posted?  You get an erro rmessage?  I don't know what mean "rare readings.

  You really shoud look at some cases DAQmx in the finder of the example.  Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected.  Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task.  Many of your data acquisition functions are sitting there on the small islands now.  You should also connect to your son for the error.

  With DAQmx, you should be combining all your analogue channels in a single task.  It should resemble Dev0/AI0... AI7.  Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.

  Other things you need to do is to replace the structures sequence stacked with flat sequence structures.  Turn on automatic growth for some of your structures such as loops.  At the end of the day, you might find, you can eliminate some of the structures of the sequence.

• What is the best way to change the elements of the array (without copies of the table)?

  Hi all

  I am new to Labview, so I'm sorry for the newbie question.

  I'm using Labview check parts in an assembly as a precursor to the test. For my 'list' I create an array of clusters, with the cluster containing a string for the part number and a Boolean value if the latter has been analyzed. I read in my parts list, and then I add on behalf of the party to each cluster in the table. I don't want to do multiple table if possible copies. The code below does not work - I've had the 'matrix' (my Checklist) outside the while loop, because I assumed that the box of items inplace should not output. The cluster created in the inplace elements is correct, but the 'picture' does not change.

  

  Any help woud be appreciated, I would have preferred a simpler solution elements inplace if possible (once again without making multiple copies).

  Concerning

  Ray

  You do not show the rest of the code, but I'm guessing that your "matrix" is never initialized with all values. Thus, 'replace' will not work since you can't replace an element that does not exist. If the case you are showing is supposed to be the initialization of the table (and based on what you say, it seems as if this is the case), and then abandon the inplace structure. All you need to do is automatic index of your array of strings and just do this:

  

• What is the best way to change the IP address of management vmkernel on a vDS?

  Hi all

  I'm changing the IP address of the management interface vmkernel with as little downtime as possible and markets.

  The interface is part of a distributed switch and the host is part of a cluster on the vCenter server.

  As for now, here's what I do:

  (1) to migrate all virtual machines on the host and put it into Maintenance Mode.

  (2) remove a vmnic from the vDS and add it to the standard switch (which guarantees access to the management of VLANS).

  (3) move the core of the management of the vDS to the standard switch.

  (4) remove the host to the switch of the vDS.

  (5) remove the host from the inventory.

  (6) change the IP address, then make the changes in the DNS in accordance.

  (7) re add the host to the cluster of vCenter.

  (8) apply a profile of the host with the previous configuration (config vmnic, vmkernels, etc.).

  (9) correct the host profile.

  How do you do it?

  Greetings,

  RO

  Take a look at the post of Chris Wahl

  Application of new IP addresses to vCenter, hosts of ESXi and Plugins - network Wahl

  As long as the hosts are connected to vCenter using their FULL domain name, you wouldn't remove them from vDS, etc..

• What is the best way to improve PreE10 export time?

  Import mts directly from a HARD drive or sd card using the importer PreE10. Then I add titles, audio fades and transitions and then export to DVD. At the present time, my plans are 60 min + ~ 4 min black exported directly from PreE10 such as SD on a DVD and video length.  It takes on average 94 minutes to complete this task.

  What can I do/upgrade to speed up this process?

  Specifications of the computer:

  Windows 7 Professional

  -Intel Core i7-3770

  8 GB RAM DDR3

  SanDisk 128 SSD (OS + programs)

  WD Blue 1 TB 7200 RPM HDD (all media)

  650 1 GB GTX

  Purchase of an another SSD would help? Upgrading my processor have dramatically improve time? Or should invest in Premiere Pro and upgraded GPU?

  I want to stay with PreE10, but if there is nothing more that can be done to improve considerably the time, I would consider going to the next level with Premiere Pro.

  johnjv24

  I'm strictly a Windows elements user and escaped the cloud so far. It seems that the cloud is still involved in the trial. When I went to the Adobe download page for this and click on download, I was struck with an opinion about the need for a "creative cloud Manager." I did not pursue the path beyond that at this time.

  When burning to the (4.7 GB) or folder (8.5 GB), Premiere Elements burn ' on file generates two folders, one called OpenDVD and the other the VIDEO_TS. It's the VIDEO_TS folder which is our only home. It is the same VIDEO_TS you would have if you have burned your Timeline to disk. The important difference in the two approaches is that burn results of disc in DVD-VIDEO format on the right disk file system. Your burn the folder VIDEO_TS folder must be on a disk with the right to file system. Program like ImgBurn can do that. You don't have to bother with any mention of a folder Audio_TS which could be mentioned in the instructions.

  Open ImgBurn

  Select the folders/files to disk write

  In the interface that opens, go to file Menu/browse a Source folder and do just that, search and find your file to your Premiere Elements burn VIDEO_TS folder.

  Under Options, double check to have

  Data type: MODE1/2048

  File system: ISO9600 + UDF

  Revision of the UDF = 1.02

  Then simply follow the instructions from there. There will probably be a message about volume labeling. Click Yes.

  Then compare the time consumed in

  First burn items to the folder + ImgBurn process

  with

  First burn items to a disc

  I'll see what I can find out about Premiere Pro CS6 tryouts.

  Later.

  RTA

• What is the best way to change the color of the first word in a paragraph?

  I have a lot of paragraphs where I want that the first word to keep the same font, the size, the type - but I want to change just the color of the lettering.

  I suggest to do this:

  (1) change your BC 4567000000 to the following line:

  4,567,000,000 BC - name derived from Hades.

  (2) add the following line after the top of the page:

  . first-word {color: red ;}}

  Note the period in the above code.

  The top of line will now look like this:

  H1 {make-size: 200%; do-family: "Comic Sans MS"; color: #66FFFF; text-align: center ;}}

  H2 {make-size: 100%; do-family: "Comic Sans MS"; color: Red ;}}

  p {make-size: 100%; do-family: "Comic Sans MS"; color: #EEEEEE ;}}

  . First-word {color: red ;}}

  Alternatives are almost similar to this one but try this one and then come back and demand the implementation of alternatives.

• Ask questions about the best way to build a page

  I built a site design in Photoshop and then slice it upward, leaving a space for the main text of each page. Then, I put the html code and images in Dreamweaver and built a model, make an editable region in the table cell where the main text of each page will go. Here's a screenshot to give you a better idea...
  
  Screenshot
  
  Originally I set up so that the combo box had a scroll bar to accommodate the amount of text to the page (I used whole overflow to auto in CSS). The problem is, the customer does not want scrollbars and wants to dynamically extend the page vertically according to the amount of text for the page (with top image of women aligned with the text and their relationship to bio under the navigation bar and 2 magazines and photos that his introductory text and copyright is pushed down to the bottom below the main text).
  
  If I don't use the scroll bars and try to put more text that you can insert into the editable cell, it breaks the table and nav bar gets all messed up and looks like this...
  
  Screenshot 2
  
  I am at a loss, how can I set up so that the page will dynamically expand vertically with the text? Any suggestions? A table is not the way to go? What is the best way to do it?
  
  I'm open to what it is at this point, I tried things on my own for hours with no. results, any help is appreciated, thanks!

  Hey everyone, I just wanted you to know that I have rebuilt the table in Dreamweaver, it has worked very well and solved all the questions I had, thanks for any help!

• What is the best way to edit the pixels of the layer without applying the image?

  Help, please!?

  What is the best way to change the pixels on a new layer (clone, healing, patch or selection) without applying the image? When I do that, I can't change the under layer if I make a mistake.

  Does this make any sense!

  You want to use the patch tool to put the fix on its own layer? Use sample all layers in the Options bar.