are there options of command line for wuapp.exe (windows update)?

Similar Questions

• Portege Z10T - documentation of command line for tinstallwb.exe (PVAT)

  Does anyone have any documentation on the command line for tinstallwb.exe, or know the switch to enter these?

  I have to do some recording during the installation.

  We are the Z10t assessment and want to install the package Toshiba value added via SCCM during our deployment task sequence. I did the same thing for the Z930 successfully.

  I use the latest version (1.6.0035.6406) of the PVAT.

  After having extracted the contents of tc30573300f.exe, the command I use is 'tinstallwb.exe s - sms. While this works in my wrapper for vbscript, it fails during the actual deployment. If I could start recording, I could see what goes wrong.

  I tried to install just \TVAP\TOSHIBA package.msi before value added, but even if that moved successfully, these sheets never appear when you press the Fn keys.

  Any ideas?

  Unfortunately, this isn t available documentation.
  I also found advice to install the PPV from the command line

  But the package contains other files such as setup.exe or install.exe exe
  Have you tested the installation, the use of these files?

• PI 3.14 constant *-are there a function/command vehicle for pi

  Hello experts!
  
  Just a small question that's bugging me. Instead of setting IP manually, I'd like to know that Oracle 10 g has a call into to the constant Pi? I couldn't find any info in google. So I ask you.
  
  I have the SQL / and I work with apex:
  

  SELECT 
  (SELECT (SELECT COUNT(INV_PT_ID_SUB) FROM VT_PUNKTDATEN_JOIN WHERE CNT_GEBIET = :P480_CNT_GEBIET
  AND INT_STATUS_SUB = 3 AND (STR_LRT_MAIN = :P480_STR_LRT) AND (INT_BE_MAIN = :P480_BE)) * 
  INT_RADIUS_BIOTOPBAUM_SUB * INT_RADIUS_BIOTOPBAUM_SUB * 15 * 15 * 3.1415926  FLACHE
  FROM VT_PUNKTDATEN_JOIN P
  WHERE 
  (P.CNT_GEBIET=:P480_CNT_GEBIET 
  AND P.INT_STATUS_SUB=3
  AND P.STR_LRT_MAIN = :P480_STR_LRT AND P.INT_BE_MAIN = :P480_BE)
  GROUP BY P.INT_RADIUS_BIOTOPBAUM_SUB) BIOTOPBAUMFLAECHE,
  (COUNT(B.INT_BM) + COUNT(B.INT_BHG) + COUNT(B.INT_BHK))  * 10000 / (SELECT (SELECT COUNT(INV_PT_ID_SUB) FROM VT_PUNKTDATEN_JOIN WHERE CNT_GEBIET = :P480_CNT_GEBIET
  AND INT_STATUS_SUB = 3 AND (STR_LRT_MAIN = :P480_STR_LRT) AND (INT_BE_MAIN = :P480_BE)) * 
  INT_RADIUS_BIOTOPBAUM_SUB * INT_RADIUS_BIOTOPBAUM_SUB * 15 * 15 * 3.1415926  FLACHE
  FROM VT_PUNKTDATEN_JOIN P
  WHERE 
  (P.CNT_GEBIET=:P480_CNT_GEBIET 
  AND P.INT_STATUS_SUB=3
  AND P.STR_LRT_MAIN = :P480_STR_LRT
  AND P.INT_BE_MAIN = :P480_BE)
  GROUP BY P.INT_RADIUS_BIOTOPBAUM_SUB) AS HOEHLERBAUME,
  P.STR_LRT_MAIN
  FROM 
  VT_TBL_BIOTOPBAUM B,
  VT_PUNKTDATEN_JOIN P
  WHERE 
  (P.CNT_GEBIET = :P480_CNT_GEBIET)
  AND (B.LNG_INV_PT_ID = P.INV_PT_ID_SUB)
  AND (P.STR_LRT_MAIN = :P480_STR_LRT)
  AND (P.INT_STATUS_SUB = 3)
  AND (P.INT_BE_MAIN = :P480_BE)
  GROUP BY 
  P.STR_LRT_MAIN

  Rather than write Pi as 3,1415926 I would have a constant like Pi, without using pl/sql, however!
  
  Is this possible?
  
  Kind regards
  
  SEB

  Maybe you can use a function arcsine... it's your wish...

  select asin(1)*2 from dual
  

  Ravi Kumar

• Is there a setting from command line for Windows Media Player?

  Could someone tell me please in the right direction for a set of command line for wmplayer settings?
  I use... .Wmplayer /play /playlist pA.wpl as an automatic start and play line RUN.
  Player starts and displays a list of PA on the screen but does not play.
  If I use... .Wmplayer /play /C:\name.mp3 then, it works very well.
  Thank you
  Brian Taylor

  First of all, /play is not a supported parameter, and you should not put a slash in front of the file names.

  To launch WMP and let him play a playlist, simply specify the name of the file to the playlist on the command line, for example:

  Wmplayer PA.wpl

  The /playlist parameter is only for play playlists that are in the library and does not have a file name of playlist, but the * name * of the playlist in the library, without extension or directories.

• Switch to command line for 7 items

  I know there is a command line switch that will allow me to start the E7 in the editor every time.  I had to work for a while before the major accident (sparks and smoke).  I have files backed up, but no info on how do to start in the editor.  Any help finding this will be accepted with gratitude. Thank you! 

  You don't have the command line, FWIW. Just find the .exe file editor and make a shortcut to that and use it to start PES.

• Are there plans to add "XMARKS" for mobile Firefox? I want to migrate from Dolphin. I have the premium version of the "LASTPAST / XMARKS ' installed on

  Are there plans to add "XMARKS" for mobile Firefox?
  I want to migrate from Dolphin.
  I have the premium version of the "LASTPAST / XMARKS ' installed on 4 platforms.

  I noticed that a user has requested to have problems to install XMARKS. I couldn't find this add on. I have it on my computers Windows Firefox. I also have it on my mobile devices.
  Thank you.
  Dick Proulx

  Hello luckyduck, as is the case with xmarks too, the overwhelming majority of the addons is not created by mozilla, but by independent third-party developers. so if you want to know if it is planned an extension for firefox on android porting or have other requests for features, please communicate with the developers involved directly in order to get a better answer. Thank you for your understanding!

• The tools of command line for applications Android download problem

  Hello

  I can't download 'Tools of command line for Android applications' Web of BlackBerry site. When I click on the blue download button with label 'Tools command line for Android applications' in the Tools section, browser updates the website tools and nothing more.

  ARO

  Maciek

  Hi again,

  Problem solved. A few hours later, I downloaded tools successfully.

  ARO

  Maciek

• command line switches WFS.exe

  I'm looking for the command line for windows WFS.exe switches.

  Thank you

  OD

  All fixed for now. I found a program that allows me to scan from the command line.  CmdTwain it's free and it allows me to send the scan of a location\filename file, but it only supports jpg and bmp files (but it's free) and it allows you to use it in your code.

  Thank you

  OD

• Options command line for Windows 7 - root set of explorer.exe

  I've seen the advice that the old syntax WinXP works but I can not put the root of the view.  The desired folder appears but [in the left pane] all unwanted folders appear also [e.g., Favorites, libraries, all other folders for the user, network] which severely complicates the view, especially once I have develop subfolders in the folder desired.  In Windows XP, the part of the root of the activated syntax look at a just the folder and its subfolders [so that the left pane just to show my documents in the left pane for example].  Simple representations of WinXP can be created in Win7?

  Which is not clarified your original intention; I see now that you were recommending "the new paradigm" rather than offering a way to recreate the previous.

  As for me, I only occasionally used far the paradigm of wire of Ariane and never as a total replacement for the navigation pane.  I guess I'll have to turn off the pane for a while and see how the breadcrumbs affects my workflow.  I've been very heavily dependent on the visual appearance of the component and be able to see the hierarchy and relationships... but on the technical information is also available in the bread crumbs, but not as visually complete.  We'll see.

  As an addendum, it is worth noting that, despite this overhaul two times you mentioned, Explorer still apparently accepts all the original XP - era command-line switches, as / root, even if they have no relevance and seem to be ignored.  If the switches is nothing more do, then for gods sake why not to delete and generate a warning or polite error?

• How to get the latest tools of command line for Mountain Lion

  Hello community.

  I have a MacBook Pro withSoftware OS X 10.8.5 (12F2560)
  It is according with Mountain Lion:

  • https://es.Wikipedia.org/wiki/OS_X#versi.C3.B3n_10.8:_.C2.ABMountain_Lion.C2.BB

  I use Homebrew, he requested updated command line tools

  Now I'm on https://developer.apple.com/downloads/ and looking at Command Line Tools , the latest update for my OS version is April 2014 (see picture)

  

  So I'm not able to do a new update. Given that my OS is old.

  I just installed Xcode by https://developer.apple.com/downloads . And only used or needed for Homebrew.

  What can I do to get a new update?

  Thank you.

  Upgrade the operating system if you want to have access to latest updates.

  Make sure your computer is compatible with Lion mountain, Mavericks, Yosemite, El Capitan.

  To check the model number and hold the option/Alt hold, go to the Apple menu and select system information.

  MacBook Pro (Mid/Late 2007 or newer) model number 3.1 or later version

  Your Mac needs:

  Installation of OS X 10.6.8 or OS X Lion

  2 GB or more of memory (more is better - minimum 4 GB seems to be the consensus)

  8 GB or more of available space

  Check to make sure that your applications are compatible. PowerPC applications are no longer supported after 10.6.

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

  Make a backup before installing, preferable 2 backups on 2 different disks.

• Switch to command line for windows update unisntallation

  I'm trying to uninstall the patch WindowsXPr-KB953838 - x 86 .exe.
  I tried as "WindowsXP-KB953838 - x 86 .exe / uninstall" but he can't.
  Please help how to uninstall this hotfix by command line switch.
  I also checked some command line options that are mentioned in the below
  Links
  http://support.Microsoft.com/kb/184305/
  http://support.Microsoft.com/kb/262841
  http://support.Microsoft.com/kb/197147
  Nothing works very well.
  FYI: I am able to uninstall this hotfix from "Add / Remove Programs".

  Hello

  Welcome to the Microsoft Vista answers Forum!

  Try not provided below and check if the problem is resolved.

  You must run in elevated mode command prompt, and then type the command to uninstall the particular update, to do that follow the steps below.

  Right-click on the desktop.

  Click on the new shortcut, type CMD, click ok.

  For a type of high order name, click ok.

  Now right-click on the shortcut and click on properties, then advanced, then run as administrator.

  The command prompt opens and you need to paste this command

  C:\WINDOWS\$NtUninstallKB 953838-v3$\spuninst\spuninst.exe and press ENTER.

  This allows to uninstall the windows update special taking you through the wizard.

  Note also that you must run the command in the recovery console to uninstall the service pack updates.

  To start your computer with the recovery console and remove or uninstall updates, you must follow the link provided below.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/default.aspx/KB/314058

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• If you bought Windows 7 as an upgrade and your drive HARD dies, are there options to reinstall it on a replacement HARD drive?

  You have a Dell portable way in 07 or so for college loaded with Vista Ultimate. A few years later (I think it's from ' 09-10 Dec - Jan) I decided to take advantage of a student on Windows 7 discount and improved. Hard drive crashed a few months ago and I just got a replacement drive. Installed Vista Ultimate from the backup drive and I was wondering if there is a way to upgrade to 7? I looked everywhere for an answer without success.

  If you still have your product key Windows 7 download Windows 7 version, your key is to burn a DVD of installation of the. Download the ISO and upgrade.  Note: I would like to make a backup of the Image in the external media befor you start the upgrade. The phone activation may be required.

  = Backup software image (works in both Vista and Windows 7 =)

  EASEUS Todo Backup Home V5.6 http://www.todo-backup.com/
  Free version: http://www.TODO-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 5.6 supports XP, Vista, Windows 7 and Windows 8

  ===================================================

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers ============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How Activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• VMware Player 6.0.1: Howto from command line, for example, where is vmrun?

  Hello

  I installed VMware Player 6.0.1 on openSUSE 3.1 by using the serial number that I received with Fusion Professional 6.0.2.

  Virtual machines spin if they are started through the user interface, but I would like first of all to them via command line.

  Question: How can I start virtual machines from the command line? I've read that vmrun must do the job but I can't find this command.

  Did a search on my system: no file vmrun lie.

  Any idea where I get vmrun of?

  Thanks for your help,

  Fred

  It is installed separately and is available under the tab drivers & tools of the VMware Player download page.

• What is the parameter to specify on the command line for thunderbird automatically send email.

  I do apply to using macros Calc and precise automatically send emails, I know it's possible, to inform the parameters through a command line, but Thunderbird does not send automatically receives them, only the parameters, fill in the fields, but the send command are required manually.

  Thunderbird does not authorize this transmission stripped.

• Arguments for command line for TestStand tools

  If I run the user interface of the command-line like this:

  

  I get this:

  

  Now, I want to create a tool.  Then in the sequence editor, I go to tools > customize...  Then I add a command tool pointing to the executable of the user interface.  Then, I try to pass an argument as I did on the above command line.  -Help!  It doesn't seem to work.  I tried with quotes, without quotes, with a space without space, etc...  In the end, I want to spend my file in the sequence selected in there.  Ideas?

  

  Hi Jigg

  RunState.InitialSelection.SelectedFile.Path did the trick

  

  Concerning

  Jürgen