VMware Player 6.0.1: Howto from command line, for example, where is vmrun?

Similar Questions

• Is there a setting from command line for Windows Media Player?

  Could someone tell me please in the right direction for a set of command line for wmplayer settings?
  I use... .Wmplayer /play /playlist pA.wpl as an automatic start and play line RUN.
  Player starts and displays a list of PA on the screen but does not play.
  If I use... .Wmplayer /play /C:\name.mp3 then, it works very well.
  Thank you
  Brian Taylor

  First of all, /play is not a supported parameter, and you should not put a slash in front of the file names.

  To launch WMP and let him play a playlist, simply specify the name of the file to the playlist on the command line, for example:

  Wmplayer PA.wpl

  The /playlist parameter is only for play playlists that are in the library and does not have a file name of playlist, but the * name * of the playlist in the library, without extension or directories.

• I need to increase the memory available to an application from command line (DOS window)

  At the cmd prompt, I perform the mem command and get the following. I have 3gig of ram but the mem says I have 0 contiguous extended memory available? Is there a way to access this memeory?

  memory 655360 bytes total conventional
  655360 bytes available in MS-DOS mode
  578240 largest executable program size

  1048576 bytes total contiguous extended memory
  0 bytes available contiguous extended memory
  941056 bytes available XMS memory
  MS-DOS resident in high memory area

  This solution does not work, thanks for the reply but. I found that Vista locks going to the Command.pif running cmd from Windows users, so even if you terminate the process cmd it active again. I also found a mistake in one of the sons were he mentions emm396.exe as a way to check the emm on Vista memory. My Home Premium installation isn't emm386.exe.

  Anyway once again don't thanks for the help no wonder that many stores do not use Vista. There are a number of development tools that run from command line.

• Portege Z10T - documentation of command line for tinstallwb.exe (PVAT)

  Does anyone have any documentation on the command line for tinstallwb.exe, or know the switch to enter these?

  I have to do some recording during the installation.

  We are the Z10t assessment and want to install the package Toshiba value added via SCCM during our deployment task sequence. I did the same thing for the Z930 successfully.

  I use the latest version (1.6.0035.6406) of the PVAT.

  After having extracted the contents of tc30573300f.exe, the command I use is 'tinstallwb.exe s - sms. While this works in my wrapper for vbscript, it fails during the actual deployment. If I could start recording, I could see what goes wrong.

  I tried to install just \TVAP\TOSHIBA package.msi before value added, but even if that moved successfully, these sheets never appear when you press the Fn keys.

  Any ideas?

  Unfortunately, this isn t available documentation.
  I also found advice to install the PPV from the command line

  But the package contains other files such as setup.exe or install.exe exe
  Have you tested the installation, the use of these files?

• are there options of command line for wuapp.exe (windows update)?

  I have some Vista virtual machines set up to perform specific tasks, then stop - these VMs run at specific times, as if a physical computer running, ran a task, then stop.  I want to be able to automate the Vista updates without having to manually open each VM on a weekly basis.  Are there options for command line for wuapp.exe so that I can program the virtual machine to turn on, install updates, and then click Stop again?  Or y at - it another way to accomplish what I'm doing?

  Thank you

  Hi Prisoft,
  
  Welcome to the responses of Microsoft Vista Forums!

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  With regard to:

  Divya R -Microsoft Support

  --------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think

• The tools of command line for applications Android download problem

  Hello

  I can't download 'Tools of command line for Android applications' Web of BlackBerry site. When I click on the blue download button with label 'Tools command line for Android applications' in the Tools section, browser updates the website tools and nothing more.

  ARO

  Maciek

  Hi again,

  Problem solved. A few hours later, I downloaded tools successfully.

  ARO

  Maciek

• A machine virtual de VMware player can be saved on an external HDD for backup?

  Please allow me to set up the scene: I have a shadow PC from my main system on VMware Player

  I try an update on my 1st VM player. The update for my distro of choice borks the system, or at least a very important application. My corrections to the application can do worse things & this my system borks. I then delete the virtual machine.

  Now after this deletion, I do a reinstall Virtual complete. Then wait and see if a fix is coming in the next update.

  If I copy/home/username/vmware/opensuse to an external USB HARD drive.

  Is it possible after deleting a virtual machine in the drive to go to my USB and pick up my copy of opensuse in/home/username/vmware/and have it function like the old?

  Hey there,

  You can stop to the bottom of the virtual machine, copy the VM on your external HARD drive and be prepared to restore it if it breaks.

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• How to access the disk HARD recovery from command line?

  Hello.

  I have a little trouble with my toshiba Satellite. My system crashed and I forgot to create the system recovery dvd.
  I can't access the "Toshiba HDD Recovery" when I start from another DVD Windows-7, but io accesses the recovery of HARD drive on drive D: with the command line. Is it possible to start the drive HARD recovery manually?

  Kind regards
  Marco

  I know something like this isn't possible.
  If you did not create a recovery disk and you cannot start the HDD recovery procedure, you can order the new Arvato recovery disk

• How do you access iCloud drive from command line?

  I'm on OS 10.10.5.  On any Finder window, I see iCloud drive listed (with subfolders, some created by me, others not).

  How can I look at them from the point of view "unix"?  That is, from the command line.  When I do:

  $ sudo find /-name iCloud\ in car

  He finds a /System/Library/PrivateFrameworks/CloudDocsDaemon.framework/Versions/A/Resource s/iCloud Drive Drive.app/Contents/MacOS/iCloud file, which is an 'executable x86_64.  I'm afraid to run it from the command line.

  Can someone please tell me how I can watch some entries in folder under "iCloud Drive" via command line?

  Thank you.

  Tena

  I can access m iCloud drive of documents from the Terminal by entering

  CD ~/Library/Mobile\ Documents/com ~ apple ~ CloudDocs.

  This will set the current directory to the root of the drive to iCloud.

• NIMAX generate a report from command line

  Dear users,

  I would like to generate report MAX ("MAX generate Report.vi') command line. Nimax.exe has this ability, or do I have to write a wrapper to vi?

  Kind regards.

  Hello

  It is possible to do it from the command line. You can see how to do this in the document:

  Documenting the Measurement & Automation Explorer (MAX) Configuration information

  http://digital.NI.com/public.nsf/allkb/271F252B4EF0A2E0862570E70056A1E4?OpenDocument

  Kind regards

  Dawid

• Request signatures (sign your App) from command line

  Is there a way to "request for signatures" from the command line?

  I'm doing my deployment during development much easier and without having to enter my password of signature.

  java-jar "C:\Program research in Motion\BlackBerry JDE 4.6.0\bin\SignatureTool.jar" - a - c - p

  should work just fine.

• Windows 7 Defrag from command line does not work

  We are running Windows 7 in a virtualized environment. When you run windows defrag hourly use of the command line, it does not work. The order that I will execute as administrator is

  C:\Windows\System32>defrag/c

  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  It displays the above message and leaves back to the command prompt. However if I run the defrag C: command it does not. Defragmentation from the GUI works so as long as both drives (C: and system reserved) are selected and when I click on defragment drives, works very well.

  I am concerned about defrag from the Task Scheduler with the command ' defrag/c' (self programmed to help set up the calendar... from Disk Defragmenter) does not work and the system never gets defragmented automatically.

  This only happens with some of the windows virtual machine 7 we have.

  There are no entries in the event log that point to defragmentation (using the Task Scheduler). Anything can happen on the ideas?

  Hello Sebastian,.

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How can I print spare part in a PDF file from command line?

  For my organization, we have a lot of .pdf files, each of which contains several .pdf files in their midst as attachments (i.e. a single .pdf file that contains other .pdf files). I know that I can print a .pdf file with the following command via the command prompt.

  "C:\Program Files (x 86) \Adobe\Acrobat ' / n/t 'filetoprint.pdf' '\\printerserver\printername '.

  Although this example shows the PDF in question, it does print all attachments in the file 'filetoprint.pdf '. I've scoured google and these forums, but I did not seem to find a switch or anything that would allow me to do. Does anyone have any suggestions? It must be done by the command line. I'd appreciate any help! Thank you!

  ~ Justin

  After much research, I found the answer. Start with, rather than using a .bat file, I used the wizard of the Action to set up a script. Then, I put the script to process all the files in a given folder. I changed the folder that will contain all the files in .pdf (including attachments) that I wanted to deal with. Then, I wrote the following javascript code:

  var d = this.dataObjects;

  pp var = this.getPrintParams ();

  pp.interactive = pp.constants.interactionLevel.silent;

  pp.printerName = "\\\printerserver\\printer";

  This.Print (pp);

  var oDoc;

  for (var i = 0; i)< d.length;="">
  {

  oDoc = this.openDataObject (d [i] .name);

  oDoc.print (pp);

  }

  Yes, it isn't command line as I originally wanted, but there is still work for what I need to do. It looks like you can trigger an action from a VBA Macro or something, even though at this point, I think it's more trouble that it's worth. in any case, I hope this helps anyone who has the same problem!

• portablize an application from command line

  I want to use vmware to portablize this application
  This application includes:
  1. an exe file
  2.a batch file
  the batch file uses the command line to run the exe file
  How can I portablize this project?
  I made a simple pre and post scan but the vmware does not capture anything on the execution of the batch file, but just the exe file
  My problem is mainly to set up the file "Package.ini.
  Help, please...

  for example, the batch file contains:

  
  the echo of my text

  the entered value 1 =
  Set /P INPUT1 = % = %

  If INPUT1% equ 215%

  a.exe

  the batch file captures the entry and if 215 is entered, it starts a.exe

  Please change the first lines of package.ini as below (do not add to the bottom of the package.ini)

  [a.exe]
  Source=%SystemSystem%\COMMAND.com
  CommandLine=%SystemSystem%\COMMAND.COM/c h.bat
  ReadOnlyData = Package.ro.tvr
  Project WorkingDirectory=%drive_C%\My

  Make sure that the h.bat file is available under %drive_C%\My project folder.

  If this isn't the case, copy the file manually and rebuild the package.