Are there tags for the Flash buttons so there navagation for iPad

Similar Questions

• loading html document stored on the local hard drive using the 'flash' button

  Hello! I use adobe cs 5.5 flash (action script 3), and I need to load an html document into my hard drive using the 'flash' button I tried navigateToURL (thanks kglad). Here is the code:

  quizstart_btn.addEventListener (MouseEvent.CLICK, arithmeticlesson);

  function arithmeticlesson(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("file:///C:/quiz/truequiz.html)", "_blank");

  }

  But I want to play my flash file to the other computer. In order to access the truequiz.html, I'll make a folder named quiz to C:\.

  How can I load this html file to other computers without creating a folder to C:\? Sorry for the dumb questions. I'm new coding. Thanks in advance!

  Is there another html file that includes the swf file?  If so, it is in a different folder, then you need to adjust the path so that the swf file target html file as if it were in the same folder as the html page that incorporates.

  Are other than that, you getting any kind of error message from security to try to link to the page in this way?

  I really enjoyed my visit here.  We went in February, the coldest time of the year, and when I got my mother-in-law apologized for the cold, it was then that I was just there dripping with sweat.  Where I am now (upper NY) it is-10 degrees...  If here and there, I'd be a temperature controlled indoor environment.

• Browser 'Back' arrows do not work with the Flash buttons.

  Can't seem to get around this problem...

  I did several keys flash for use in my navigation bars. They work fine, but the 'return' arrows on the browser are still grayed out. It does not matter what kind of browser I use.

  Flash keys are embedded in the pages and the site was done in Dreamweaver. I posted the same question on the Dreamweaver forum and got vague answers.

  Is there a code I can put in my Flash buttons?

  If you have an answer please be specific as I'm not an expert.

  The site is fireonmcginnis.com

  or just type 'Fire on McGinnis' in a search engine.

  -Toastieo

  Spry or regular hyperlinks in a list configuration or nav. One is better than the buttons Flash.

  It's a search bot will read the HTML in these types of links (spry or HTML) and indexes. Way if you have a calendar of events for upcoming shows, or a Discography page, can and will be able to make a reference to them in search engine databases later (usually about 72 hours after indexing). Using the Flash, there is no code for the bot to find and your upcoming events, or a download page if there is one, will never be seen in a search even if people look directly to "fireonmcginnis: Annex", or "music by fireonmcginnis" because Google, Yahoo, Lycos and other pages simply do not exist.

  Spry is great if you have submenus, and since it can be customized using CSS, you can make it match your layout of the site. You can also do with hyperlinks regualr and CSS, but spry looks more attractive to a large number of Internet users and the submenus are a little more difficult with basic HTML.

  For the record, the script should read: getURL ("http://www.site.com/page.html""_self"); for the buttons. There's a drop down to select _blank, _self, _parent etc when you add the getURL script to the button.

  But... you need to stay away from the keys Flash for navigation or you're really defeat the purpose of putting a band on a Web site in the first place. It is the exhibition and keys Flash will limit seriously that exposure, even if they are working correctly.

• I would remove the list of Web sites that are allowed to use the flash

  I must have accidentally given permission to youtube to always use the flash.
  If youtube uses Shockwave flash, the video will be stuck at 14sec and then it takes anywhere from 10 seconds to 10 minutes to continue playing the video however if I disable completely the Shockwave Flash in the tab modules video will play without any problem

  You should see the permissions that are not by default in the pop-up window if you click on the identity of the Site (globe/lock) button on the address bar.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

• because of the flash buttons, but the links do not work on Web pages...

  I actionscripted some custom flash buttons with the getURL ("www..."), and they work when I preview them IN flash. When I publish, however and open the .swf file, I get a warning when I click it say something about security issues and the link never opens (or even attempted to). And finally, when I put the .swf into my .html, they do NOTHING when I click on them in preview...

  FYI - I started to do the site, and I am not yet connected to any server. I'm working locally... I use windows 7...

  Help, please! I'm about to sign with iPages Web hosting for and want up on the site soon!

  Thank you!

  If they are coded correctly in flash and imported in Dreamweaver it should work fine and most people have installed Flash Player on their machine. I think that people without the player will automatically be asked to download a free version of Flash Player, if they don't have. It has worked for me a couple of times and it's nice to have "fancy" animated buttons too!

  Fred...

• Why the Flash button to insert feature has been removed in CS4?

  I do my first website, and I was eager to use the flash, I had experienced with them in an earlier version, but this option has been removed! I was wondering why, and whether it has other options to make animated buttons? (not the rollover buttons, they're boring! ) )

  Adobe removed the buttons Flash CS4 for web accessibility reasons.  They are not friendly to search engines, translators, screen readers or people who do not have Flash enabled in their web browser.  It would be wise to steer clear of navigation flash for all of these reasons and use menus CSS style instead.

  Several FREE CSS menu systems here.

  CSS Express in the drop-down Menus (tutorial)
  http://www.Projectseven.com/tutorials/navigation/auto_hide/

  CSS Tab Designer creates drawn 60 + CSS button and tab Menus (download)
  http://www.highdots.com/CSS-tab-Designer/

  List-O-Rama (DW Extension)
  http://www.DMXzone.com/go?5618

  CSS Menu Maker (generator Menu online)
  http://www.cssmenumaker.com/

  Pop-up menu Magic2 by PVII (purchase of DW extension)
  http://www.Projectseven.com/products/menusystems/PMM2/index.htm

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• double click on the flash button problem

  How to make a flash button to work on 1 click instead of double click

  It's only IE behavior due to changes, that Microsoft has made several
  years to their browser, on how Active Content (Flash, Quicktime
  etc)
  is managed, after losing a high-profile trial.

  http://blog.deconcept.com/2005/12/15/Internet-Explorer-Eolas-changes-and-the-Flash-plugin/

  Background:
  http://en.Wikipedia.org/wiki/Eolas

  See also
  http://www.Adobe.com/devnet/ActiveContent/

  If you are running Dreamweaver 8.0.2/CS3, the fix is already integrated to DW
  interface.

  Otherwise, try http://blog.deconcept.com/swfobject/

  Furthermore, if you want to use Flash for navigation, consider this-

  1. some people not having Flash installed - what are doing?
  2. the motors don't parse Flash links - your site will not be spidered
  3. the display of the devices and accessories functional don't parse links Flash - which users will be
  do?
  4 DW cannot maintain links within a Flash movie, so if you move or rename
  a file linked, will break your navigation - what will do you?

  It is generally a bad idea for these reasons...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "gsnservices" wrote in message
  News:ffbfuv$S7T$1@forums. Macromedia.com...
  > Yes, the button has a link that works, you just have to dbl click it. When
  > you first click you get a box around the button, click New, and need
  > you for the link

• Can't get 2 / 3 to the Flash buttons!

  I have a school project and our teacher may not yet know what is wrong. We have a movie/mini for our final project site and we have a layer/scene intro that stops and fade three buttons to navigate through the respective sections (forensics, web dev and company). Forensics button goes to the forensic science page and the home button which takes back you to the page nav, perfect. However when I try to do the same exact commands for the other two buttons it does not work. Can anyone clue me on what I am doing wrong? Its Thursday deadline and I am panicking!

  Here is the file... https://DL.dropbox.com/u/9832993/final.fla

  Try to find all gotoAndWhatever orders that you use and you will find that you have at least one of the things to go where you don't want them to go.

  Putiing code on() objects such as the way you did with your buttons is a bad habit.  If this is what you have been taught, you are taught bad practices.

  You put on your code as buttons...

  {We (Release)}

  gotoAndPlay (15);

  }

  Instead, give the button an instance name in the properties panel, where it says .  Let's say you name "businessBtn"... If so, then in the timeline, in a layer that you book for actionscript, you would use the following code...

  businessBtn.onRelease = function() {}

  gotoAndPlay (15)

  }

  And the rest of the code for your buttons would be in the same context of the timeline where you can see everything at once.  Then go collect other small pieces of code that you have along the timeline in the different layers and move to the corresponding frames of the layer an actionscript.  Now you have all of your code in a single layer, where it is easier to find and easier to look thru to track down any problem with him.

• Cannot export the PDF file into WORD Doc (that I just bought) system allows me to choose which PDF file but is grayed out in the area where is located the "Convert" button - so no activity.  I want to be sure that my order was confirmed the e-mail address

  RE: ORDER NUMBER: ADO18068065

  I just bought your program Adobe Export PDF but does not - Adobe allows me to capture what PDF I want to export - but won't let me DO NOT convert the file (the window to see where the PDF export is grayed out and I can't enter anything).  Can I entered an incorrect email when I signed firstly for the export of Adobe program ([email protected] INSTEAD of Correct e-mail address: [email protected] could you go to see if the order went through because your window opens each time I try to export a PDF file to WORD asking me to buy the program Adobe export again. )

  Thanks - Pls email me at: [email protected] with your answer.  

  Hi constancew92438621,

  Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the service to export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC.

  You can also use this service online at https://cloud.acrobat.com/exportpdf

  Let me know if you have still any problem?

  Kind regards

  Nicos

• How can I change the function of a flash button?

  Hello

  You are not sure if this should go in the Flash forum or Captivate forum, but nobody knows how, where to find ActionScript 3 orders for Captivate?

  I downloaded a pre-made button Flash (source file) for Adobe Captivate, which was originally made to make a video go to the next slide when you press. He does it very well, but I wanted to know how use the ActionScript in Flash Professional CS5 to have the button JUMP to a specific slide in Captivate, rather than just go to the NEXT slide. I know that usually how the code works, but have never really used and do not know the specific command to get there. Currently, the relevant part of the code of the 'Flash' button reads:

  function clicked(e:MouseEvent):void {}

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  mainmov.rdcmndNextSlide = 1;

  I think I should just change the last line to something else and it should work, but I need the command. Can someone tell me what needs to be changed in the code above to get there?

  The full code is below. Thank you.

  
  

  Here is an answer for everyone out there trying to do the same thing.

  To change the function, simply change "rdcmndNextSlide = 1" to another command with its variable. Commands and variables can be found here:

  http://www.cpguru.com/2010/07/20/Adobe-Captivate-5-system-variables/

• Add code to the PayPal button Flash

  I want to use my own button .swf for PayPal payments with a 'hidden' format, but when you add the generated code for the PayPal site on my html page, only a red X and the alt text shows PayPal where the button should be. I changed all the Active X controls to activate.

  Whenever I have contact PayPal I get a different answer. The last of them was that I should add a 'static' image, but I really want to use my own button.

  I would find a way to paste the PayPal code in my script of action buttons and then I can't stick the Flash button for html, but do not know how to handle that because the only code generated by PayPal is a 'form' in html format. I am also add text fields and guess that's why I don't get a code generated by email from PayPal that I get if I do not add text fields.

  Any ideas how I can convert the code generated by PayPal at my action script are welcome. I have about 150 buttons to add!

  This is my link: http://www.astondenwoodjewellery.co.uk/Jewellery%20html/Gold%20Rings/GR02_button_test.htm

  your swf button is animated?

• Flash buttons in Dreamweaver

  Hey everybody
  
  So I have these buttons Flash on my site (which is done in Dreamweaver), and when I go to "test" the site... the buttons will work when the page first loads (Home)... but if I click on a link, say 'Contact', the buttons are not there more! And if I come back to home' that they aren't there either!
  
  Does anyone have suggestions or solutions to this problem?
  
  Thanxs a lot in advance!
  -Liz
  

  > actually, I have to OBJECT tags...
  > but if I go to click on a link, lets say 'Contact', the buttons are not
  > more!

  You have the Flash buttons on web pages was my point. In other words,.
  do you have the same keys Flash on the Contact page?
  > Can someone take a look at my code and see what's wrong with it?
  intro_buttons.swf

  Is the intro_buttons.swf in the root of the web site folder - what? On the
  local disk the / could mean the root folder of the computer if you are not
  tests of http://.

  --
  LON Hosford
  www.lonhosford.com
  Number of happy bits exempts your way!
  "EBTurner" wrote in message
  News:e3bdng$2dF$1@forums. Macromedia.com...
  in fact, I OBJECT tags...

  Can someone take a look at my code and see what's wrong with it?
  Thanxs!

  
  
  

• 70 d with diffuser - press the Flash does nothing

  I used my diffuser on my old XSI years and when I went to try it on my new 70 d the camera Flash seems to disable. When it comes to install in the shoe, and I try to press the flash button, nothing happens. As soon as I remove the button works.

  I think that Cicopo is good, think the camera there is something that will block the pop-up flash and keeps it retracted. You might be able to determine where the switch is and modify the broadcaster for not he hit.

• Help my Flash buttons

  I use flash buttons in my web site. Instead of text highlighted. Well, they work very well in the development tool, but when I put them on my site they do any work? What could be the problem? I've tried different directories still do not work?
  Mitch

  > what would you suggest in are flash buttons

  Graphics (GIF/JPG/PNG), or CSS style text.

  > Why are they on ly on the hobby sites?

  Car-

  1. those who do not have the plugin installed Flash will not see the link.
  2. those who need occasional on-screen will not see the link.
  3 search engine spiders will not see the link (if your site will not be
  indexed).
  4. If you move or rename a file that this button is bound, the link in
  the button will be automatically updated to reflect the change you just
  do.
  5. they look scary.
  6. I don't remember this one.
  7. it is a problem of maintenance for you (I just added this so that the list would be
  look longer).

  Those who work?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "Mitch5713" wrote in message
  News:eluqtu$San$1@forums. Macromedia.com...
  > would you suggest to the lie of the flash buttons and why are they on ly
  > hobby sites?

• Compaq 6710 b: my HP Compaq power on only when I plug in power. Don't turn on with the power button / stop!

  I have a laptop HP Compaq 6710 b... Its more than 6 years...

  The problem is really annoying... The laptop powers on only when I force taken into the spindle of the charger and the laptop works very well after that...
  But the laptop never turns on when I try to power by pressing the power button!
  I did not understand the reason why...

  Any thoughts on this problem?  Help!

  There are no settings in the BIOS that affect the use of the power button.

  The power button works at the level of the material (firmware).

  By pressing the button translates the action of the Commission of the conditions of the logic system.  There must be voltage at specific points in the power circuit. If the voltages are not present, then the power button does not work. This can be caused by a failure resistance, mlcc capacitor or a bad solder joint, if the power button has been tested and shown to work normally. Fluff even could cause this to happen. This can help out-performed by Visual inspection and using a multimeter.