Areca Raid Controller - ArcHTTP - does not work

Similar Questions

• HP 110-243w downgrade to windows 7 64 bit hp usb controller driver does not work.

  I finally got the graphics drivers to work but now can't seem to find the driver for the usb controller. the one on the hp site does not work. work of USB, but I'm assuming that this id for the s 3.0 I have not tested because I have and devices usb 3.o. but he has a! in devie Manager. Thanks in advance.

  Hello:

  Download and install the AMD chipset drivers and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If for any reason any USB 3 drivers still don't get installed, then download and install these drivers and reboot.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Wired controller Xbox does not work

  I am running Windows 7 64 bit.

  I have a 360 wired remote for my pc a few days ago, and it worked fine up until now. Whenever I have connect the controller on my pc, it lights up in the 1st and 4th quadrants for a fraction of a second, and then the whole circle lights up and flashes 4 times, there is a long pause between each flash.

  I plugged my xbox 360 and my other pc, and it worked very well, if the controller is not the problem.

  I think the problem is that my pc is confusing the controller for something else, he keeps it's an ethernet controller, which is clearly not.

  This guide says I should have the options "HID-compliant game controller" and "USB Human Interface Device" topic "Human Interface Devices", he also says that I should have "Xbox 360 Controller for Windows" under "Microsoft common Controller for Windows class". While "HID-compliant game controller is listed, nothing else."

  

  I've tried different USB ports.

  I tried to uninstall/reinstall the drivers (and I'm sure they are the right drivers to 100%).

  I tried to uninstall/reinstall the drivers in safe mode.

  I tried to use the disk that uses drivers.

  I tried to use Windows Update.

  I tried to disable driver signature enforcement.

  I tried Microsoft Fix It.

  I tried to change the registry.

  Nothing works.

  Any ideas?

  

  The controller does not appear under "audio, video and game controllers".

  But, I thought that the controller has not shown because it was not connected, so I plugged it.

  He appeared then under "Microsoft controllers to common class Windows.

  It works now.

  

  Thanks for all the help

• Wired controller Xbox does not work... yet.

  I had this problem before and I tried to fix it, he started working out of the blue, but now he's back, and I can't fix it. My wired Xbox controller I bought a few months ago, worked when I plugged it first of all, you have this problem, started working again out of the blue and now has stopped working again. Whenever I have it connect, the controller is powered, but isn't everything, he would light up the 1st quadrant. It flashes four times, with a few seconds of time between each flash, I think he's trying to find a driver, but for some reason some can't. When I look in Device Manager, the controller does not appear.

  

  I am running Windows 7 64 bit
  I plugged the controller on my Xbox 360 and my other PC, and it worked very well, so it is not the controller.
  I tried to download the driver to the Microsoft website and using the CD of installation, no work.
  I've tried different USB ports.
  I tried to uninstall/reinstall the drivers (and I'm sure they are the right drivers to 100%).
  I tried to uninstall/reinstall the drivers in safe mode.
  I tried to use Windows Update.
  I tried to disable driver signature enforcement.
  I tried Microsoft Fix It.
  I tried to change the registry.
  Nothing works.
  Any help on how to fix this? And how can I prevent this from happening again in the future?

  Hello

  Thank you for the update.

  I suggest you to ask your question on the Xbox forums.

  Xbox forums
  http://forums.Xbox.com/

  Thank you

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Motion controller does not work on the Qosmio G50

  Hello

  as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I discovered today that my gesture controller no longer works?

  I went on the site of toshiba europe and downloaded the latest driver for it but once again, I received the message "an error has occurred in the toshiba quad core processor HD = 0x800A0100 code?

  Any help would be wonderful that its driving me around the bend!

  > as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I found out today that my gesture controller no longer works?
  So much trouble, you got there. You may create a Groove and reinstall the original recovery image. After having done this you own preinstalled OS and with the factory settings, everything should work again.

  What do you think about this?

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.

• Xbox controller does not work

  One of my Xbox controller does not work.

  When I turn on my Xbox and I opened (for example) Minecraft.

  He looks up at the sky without touching me same controller!

  Help, please!

  Ask here:

  http://forums.Xbox.com/

  or

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  See you soon,.

  J

  

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Xbox 360 controller/joystick for PC does not work properly in Battlefield bad company 2

  I recently black battlefield 2 and bad company xbox 360 wired to use with the game controller. Once both parties had been settled, I went to the settings in the games options and tried to attribute the actions with the buttons of the gamepad /, but here the rub. Not all the buttons of the gamepad a response, as the right analog stick and the arrow keys. Some of the buttons that do not give an answer have different names /-are mixed with other keys, as the right trigger. When I try to assign the right trigger for fireing, she appears as axe1 x and does not work in the game.

  Some of the buttons that work are the x button and the stick analog left and right and left bumber.

  I did not so much to try to solve the problem, as I have really no idea what to do. I thought to uninstall and reinstall the game, but that would help? Also perhaps reinstall the controller, or by downloading a driver for him on internett. It was installed using the disk resulting.

  The problem, in the game or in the controller? Perhaps driver? Where would I go to file a complaint, get my money back?

  Any help would be much appreciated!

  -Mathiasshow

  Hello

  ·        This problem happens only when playing Battlefield Bad Company 2 and other games as well?

  I suggest you run another game on your XBOX360 and check to see if the same problem happens.

  If the problem occurs with all the games then I suggest you to contact the hardware manufacturer.

  If the problem does not occur with a different game then I suggest you uninstall and reinstall the game and see if the problem is resolved.

  Please visit the link provided below for more information on how to uninstall a program in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also post your question on the link below:

  http://www.xbox360forum.com/Xbox-Forum/Forum.php

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PlayStation 3 Sixaxies Controller does not work

  Hello I am looking for a fix for this problem, I have a perferctly good controller and a new computer windows 7 64 bit and I would like to know why the controller does not work please help thanks

  Are you sure Sony support the controller on a PC?  If you are just using a pilot implemented by a guy then it probably won't work on 64-bit.

  My advice, pick up a wired Xbox 360 controller.  Windows Update uses drivers and it will install immediately.  If you want to go wireless, you can use a wireless controller with the USB Gaming receiver for Windows. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Why xbox 360 controller does not work with all pc games

  Why xbox 360 controller does not work with all pc games

  Ask in an xbox forum.

• While trying to add a PC-compatible network controller drive laptop Toshiba C55-B5353, driver does not work

  Original title: network controller

  I have a Toshiba C55-B5353 laptop with Windows 7 Home Premium. I tried to add a controller network compatible with this model, but it does not work. I installed two different versions of a Driver RealTek LAN and an Intel Wifi driver and Chipset driver, but it does not work. I am really frustrated. Please help me. Do I need drivers? If yes which in particular?

  When paraphrase you error messages and relate to your impression of what they mean, he does if he is very difficult, if not impossible, to diagnose your problem with a forum like this online.  Remember that we do not understand what you're watching.

  Let me try again:

  Open Device Manager (click Start ORB, type device manager in the start search box, press enter).

  Double-click each item that displays an icon to alert and provide:

  -from the "Général" tab

  • the device name appears in the tab "General".
  • the text that appears in the box under "device status".

  -Since the 'Drivers' tab

  • Driver provider
  • Driver date
  • Driver version

• Wireless controller does not work, said the controller is not an installed device

  My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
  It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
  I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

  Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

  But you will need to know if its Atheros QMI or Foxconn.

  If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

  Or if you want I could have a glance with teamviewer.

  You'll see what I'm doing. If you get it give me the ID and password, it gives you

  Or if you have Skype, my Skype name is the same name I use here

• Touch area does not work in the Simulator controller

  Hello!

  I use the bb Device Simulator.

  Official documentation says that with touch area to the Simulator controller I can navigate from control to control my fi application, I put political correct ficuse for her. But the touch area does not work for me. No event is occure when I do drag and hold the cursor of the mouse on the tactile area, or classic Simulator, not different mouse buttons.

  Tested under Windows 8.1 and Debian Linux with Xorg + awesome wm (and Xorg + mate of).

  How to solve this problem?

  Thank you!

  I tried this using the BlackBerry 10.3.2 Simulator and it worked.  At startup, you choose the default option no 1440 x 1440 Passport?  The Passport is the only BlackBerry 10 smartphone that supports active touch keyboard.  If you use the default startup in Simulator (Z10) the touchpad option does not work because it is not supported by this model.  To change the type, press ENTER when the Simulator starts first.