Arguments of control Script in the execution of Script Plugin

Similar Questions

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• Can the Format date/timestring service that can control the execution of the loop to a VI?

  Can the Format date/timestring service that can control the execution of the loop to a VI?

  Example,

  a VI is running at August 25, 2010 and print a txtdata(3)) '100825.

  Then follow when time system running at 2359hrs, August 25, 2010 at 0000hrs, August 26, 2010.

  and print a txtdata(3)) '100826.

  How?

  When the system changes a new date, problems occur.

  
  

• The execution of Scripts is disabled

  I remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Keep getting a warning Message on execution of Powershell Scripts is disabled on System.Is this supposed to be in the measuring mode? And if so, no matter what ideas how to do this? THANK YOU MUCH FOR YOUR TIME...  You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Michael Tothill

  Information on the execution of script in Powershell is available here http://technet.microsoft.com/en-gb/library/ee176949.aspx

  What you see is the default behavior. You need to change the ExecutionPolicy.

• What is fledge command-line argument to control the graphics acceleration?

  Is there a command line argument to control the graphics acceleration for a JDE 5.0 Simulator?

  I would like to switch off in the command line so I can add it to the Simulator Run Eclipse IDE and the debug configuration.

  I checked their moult imaginal/Help and I have not found any that I could see that it works.

  Thank you.

  The settings are stored in a file located at

  \Documents and Settings\ [windows login name]\net\rim\fledge-2\fledge-saved.conf

  At the bottom of the appearance of file for the line:

  4
  

  Change the number 0 for no acceleration.

• Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh

  Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh
  
  
  bash-3. $00 cat Err_Arch_Recon_2012_11_01_15_36_06.log
  ****
  -The execution state of archives reconciliation
  ****
  BEGIN OIM_SP_ReconArchival ("n", "n", 200000, 'ARCHIVE_SELECT_WITH_CONS_DROP_REC', 'both, '20110101',' 20111231'); END;
  
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
  ORA-00942: table or view does not exist
  ORA-01031: insufficient privileges
  ORA-06512: at line 1
  
  
  Help, please

  ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
  ORA-00942: table or view does not exist
  ORA-01031: insufficient privileges

  (1) check if the OIM_SP_RECONARCHIVAL table or the view exists or not...
  (2) if it exists, check if the DEV_OIM user has enough privilege to view this table...
  Otherwise, give it all privileges to open as a sys as sysdba

  GRANT ALL PRIVILEGES ON DEV_OIM;

  COMMIT;

• ps1 script could not be loaded because the execution of scripts is disabled on this system

  I just loaded PowerShell and Toolkit VI on my new laptop computer and I get the following security error "snapshot.ps1 cannot be loaded because the execution of scripts is disabled on.

  This system ".  What authorization security or politics I need to change to fix this?

  Hello

  The Set-ExecutionPolicy changes the user preference for the shell execution policy. The execution policy is part of the Windows PowerShell security strategy. It determines if you can load configuration (including your Windows PowerShell profile) files and run scripts, and it determines which scripts, if any, must be digitally signed before they will work.

  You must set the executionpolicy unrestricted by using the cmdlet below

  set-executionpolicy unrestricted

  get-executionpolicy will return the current executionpolicy.

  Thank you

  Christel

• After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - M892G - 84D7W-VYVVB
  Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
  Windows product ID: 00359-030-0078141-85521
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.120330 - 1504
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  Microsoft Office XP Professional - 100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {A9BF75C2-FBF3-4795-953B-E259BD0C2131}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-VYVVB00359-030-0078141-855215S-1-5-21-1580701254-2691487138-3117158855HP-Pavilion,FK484AAR-ABA m9400tAmerican Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC100100Microsoft Office XP Professional10roTAwuyn2K8JnfnZ5p70qCWUSww =54186-640-4025656-1742314 97728824C57890A

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
  Installation ID: 010516027730660442597094592351394511091775644602024082
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VYVVB
  License status: licensed
  Remaining Windows rearm count: 5
  Trust time: 10-02-2012 17:32:36

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:1:2012 07:16
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  GSCI HPQOEM SLIC-CPC
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

• The execution of an external task with dynamic parameters

  The current scenario is that a job is running a process that will return an XML of records and their corresponding scores after going through a few search rules. Finally, these files will be returned to Siebel, but until this is done, we would like to run a XSL Transformation on them. We have developed an external executable that takes input and the output XML target files as arguments and applies the transformation.

  Logically speaking, Disqualification will have to write to an XML file, call the external task (pointing to the correct XML file as it may be several simultaneous research generating XMLs), wait for the task to complete, read the XML data, and then pass this information through the web service.

  As mentioned above, the biggest problem here would be the potential of many users at the same time research. Therefore, a Shared output THAT XML is not a workable solution.

  How dynamic arguments can be passed in writing to an XML file and the execution of an external task?

  It depends on.

  In general, we use attributes of the entry on the message to change the behavior of a service in real time. The match of entry score threshold is an example of this - the process uses this attribute do not return the results below. Similarly, we use attributes in the address for service of cleaning that control whether to change the address of entry. Your customer may have a logic that defines the entry attribute values - in the case of Siebel, the threshold value is a good example of what it can be configured in Siebel and defined by the connector for Siebel Disqualification.

  Then there are options outsourced in a process of the Disqualification. These can vary for different works the same task using a profile or command-line... run the limitation of which is that the evolution of the option for a given service means stopping and restarting, but it allows things such as the same configuration to have different behaviors on different series, or by operating on different machines.

  I recommend you to read about outsourcing in the online help. Most of the settings configuration of the Disqualification can be outsourced and substituted at execution - a powerful feature that can and has been used to solve a variety of problems.

  Kind regards

  Mike

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn

• Computer laptop not start, receive the error message "this application has requested the execution to terminate in an unusual way. "IE on microsoft visual c ++ runtime library.

  According to the positions.

  * original title - my laptop does not start, i, m doing a pop up window that says this application has requested the execution to terminate in an unusual way. IE on microsoft visual c ++ runtime library *.

  Hi ElaineMckee,

  Follow the steps below:

  Step 1:

  Start in safe mode and perform the System Restore to a restore point before the show.

  See also: System Restore: frequently asked questions

  
  What to do if Windows does not start correctly

  
  Step 2:

  What is a runtime error?

  What should you do about Internet Explorer script errors?

  Correct errors in Internet Explorer

  Step 3:

  Start your computer in a clean boot state and see if you continue to receive the error.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• After the execution of Windows Genuine Advantage diagnostic, receive error of Activation of Wincows codes: 0 x 80070002.

  Original title: help please! Here is my diagnosis for windows not genuine 7601 generation problem.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - JC9MP - RR4XD-X2VPY
  The Windows Product Key hash: aV4Wd495dfX4Jb + 9VoCVUJsjZ6g =
  Windows product ID: 00359-OEM-9813527-23309
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {103A3AF5-9CBF-4564-88F4-0A56756AD671} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {103A3AF5-9CBF-4564-88F4-0A56756AD671}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-X2VPY00359-OEM-9813527-233098S-1-5-21-927868481-2885169264-3679099435Hewlett-PackardMCP67Hewlett-PackardF.32 20090303000000.000000 + 00079BA3407018400FE04090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-135-223309-02-1033-7600.0000-2952012
  Installation ID: 019865082923819881413312961676317192380855179105667704
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X2VPY
  License status: Notification
  Reason for the notification: 0xC004F00F.
  Remaining Windows rearm count: 4
  Trust time: 28/06/2014-17:40:10

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 6:18:2014 23:13
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: OgAAAAEABwABAAEAAQABAAAAAgABAAEAJJTMBBTBIL6ABLzjiMx2GwaYmGAMlEQsxJbqWrD2Isd4qg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: no, table invalid SLIC
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP NVIDIA MCP67-M
  SRAT AMD HAMMER
  HPET PTLTD HPETTBL
  START PTLTD $SBFTBL$
  MCFG MCFG PTLTD
  TCPA Phoenix x
  SSDT PTLTD POWERNOW
  SLIC SLIC-MPC HPQOEM

  Hi Christine,

  Thanks for the updates.

  If the problem persists after that you have already tried to uninstall and reinstall the product key and activate the phone, then you can try the following steps to rename the Software Licensing folder and check if it helps.

  a. Click Start. type cmd in start search. Right click on cmd and select run as administrator.

  b. at the command prompt, type the following commands, and press ENTER.

  c. type: net stop slsvc (it may ask you if you're sure, select Yes)

  d. type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  e. Enter: Rename tokens.bar tokens.dat

  f. type: cd %windir%\system32

  g. type: net start slsvc

  h. type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient).

  i. restart your computer twice.

  You may need to perform a phone activation after choose the option change the product key and make sure that the problem.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• T2K: validate: ProcessActions: the execution of the action method - txkCheckForSymLinks

  Hi all

  Run this script from Doc-ID 601736.1

  IN EBS 12.1.3 OUL6X64

  $ADPERLPRG $FND_TOP/patch/115/bin/TXKScript.pl.
  -script=$FND_TOP/patch/115/bin/txkInventory.pl - txktop = $APPLTMP.
  -contextfile = $CONTEXT_FILE.
  -appspass = apps.
  -outfile = $APPLTMP/Report_App_Inventory.html

  
  

  Still stuck in this place on every TEST, Production env
  

  T2K: validate: ProcessActions: the execution of the action method - txkCheckForSymLinks

  
  

  with these lines and never stop. has had to cancel

  / u01/TEST/apps/apps_st/comn/java/classes/oracle/apps/media/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/0020 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10062 / 10020 / 10041 / 10041 / 10041 / 10041 / 1 / 10062 is a symbolic link

  / u01/TEST/apps/apps_st/comn/java/classes/oracle/apps/media/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/0020 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10062 / 10020 / 10041 / 10041 / 10041 / 10041 / 1 / 10041 is a symbolic link

  / u01/TEST/apps/apps_st/comn/java/classes/oracle/apps/media/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/10020/0020 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10020 / 10062 / 10020 / 10041 / 10041 / 10041 / 10041 / 1 is a symbolic link

  Please advise,

  Thank you

  Hello

  T2K: validate: ProcessActions: the execution of the action method - txkCheckForSymLinks

  This action checks-> number of symlinks in directories served by oracle HTTP Server

  You have some links symbolic/u01/TEST/apps/apps_st/comn/java/classes/oracle/apps/media?

  These actions are carried out through:

  Definition XML file: $FND_TOP/html/txkInventory.xml

  Please check the settings for the actions 'CheckForSymLinks' in CONTEXT_FILE

  To work around the problem, you can try to jump CheckForSymLinks action to comment as below by $FND_TOP/html/txkInventory.xml

  Kind regards

  Kiran

• Question related to the execution of the query by using the links to the DB

  Hi all

  I have a source and target database. Both are 11.2.0.3.

  I have a query that is running on the source database and load data into the target database.

  I created synonyms in the target for all of the tables referenced in the query, remaining at the source.

  I run the query in the target using synonyms that I created. I see that the entire query became transferred to the source database and executed. The execution plan of the source was exactly the same as the way in which we could, if the query has been run directly there.

  No problems so far.

  Now, I have a database from different sources. Version 11.2.0.4.

  When I try to mimic the same behavior using this data source, the complete query will NOT be transferred to the source. He made on the source (remote site) full table scans, transfer of data to the target (local site) and then by performing sort operations & the index range scans (min/max) on the target.

  In both cases, all of the tables referenced in the query are accessible through the link in the DB.

  Please let me know if there is no setting of database / everything which could control how or where a query with all accessible by link DB tables are optimized and executed? Ideally, I want the entire query to be transferred to the remote and executed site.

  I can provide more details if necessary.

  Thanks in advance.

  Thank you sol.beach. Queries I tried both sources are in fact different. I failed to mention that.

  @John,

  We did recommend the creation of a view of the source, which is synonym on target and run the query. The client was not ready to create any object on the source system and so to test this workaround solution.

  ********************************************

  After some time, I realized that there is a hardcoded as SYSDATE column. Whenever I took it / I did as null, because the entire query is getting transferred to the source DB.

  "I changed 'SYSDATE column-name' to ' col_name (select SYSDATE from dual@remote_db_link). But this also seems to stop the query to be sent to the remote db as a whole.

  Try to work around this problem, but any ideas are much appreciated.

• "Error: not allowed to run the local process" during the execution of a WF in vRO7.0

  Hi all

  Need your help. We encountered a problem - "not allowed to run the local process", during the execution of a WF in vRO7.0.

  In this WF, they attempt to run the script class vRO 7.0 Server 'command. By default the Orchestrator applications having not allowed to run the command class, we get allowed by a mistake.

  To resolve this issue we need to set the system property ‘com.vmware.js.allow-local-process=true’ to the ‘vmo.properties’ properties file of the vRO 7.0 Orchestrator server.

  We already have the property to true for the properties file under ' / etc/vco/app-server " folder and after Orchestrator services are restarted. But still, we get the question.

  Another thing is that we use vRO cluster machines, so we put the real in both files to vmo.properties on both servers.

  
  

  Can you help me please how to fix?
  

  
  

  We have followed the link below.
  

  https://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.vco_administer.doc_42%2FGUID-F4995BD2-f2f7-48C0-B239-197F27FFE693.html

  Thank you

  Miloud

  Thanks llian, complete reboot of the devices/machines vRO made the resolution.

  Now everything works fine.

  Thank you

  Miloud