ARM

Similar Questions

• Will the 2 series watch track swim properly if using a kick Board (without using arms to swim)?

  I have a friend that is considering a 2 Apple Watch series.  It will systematically use a Board during training for her swim meets.  The new Apple Watch will follow distance and calories correctly even if it does not use his arms while swimming with a surfboard?

  I used my series 2 during my bath today for the first time. It does a great job of tracking my laps... freestyle, free with paddles and open palms. But he is not one of my kicks. I threw it only Dolphin on my back (without arms). I swam more than 250 kick 3500yds, it does not register at all. Next time I might try on my stomach, but without a Board of Directors and use my arms a little to breathe.  Overall I was impressed but.

• My watch hangs whenever I put my arm down

  MY watch hangs whenever I put my arm down

  You have a wrist enabled detection?

  In the Apple Watch app on your phone, go to the generals and make sure what wrist detection is running.

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• Arm movement is recognized as steps in the application of the activity on the Apple Watch?

  Happy new year to you all

  I am the happy owner of a Apple Watch OS2.1 running, but I think that the watch records the movement of the arm as the steps in the
  Fitness app?

  Today I was at my desk and moved no more than a few times get coffee (10 steps), the application of the activity
  the clock tells me that I moved 1 659 equal to 1.47 KM steps and I have
  a hard time to see this may be correct (work of my office at home, so basically
  went to my room to my office (max 50 markets)

  I calibrated the watch with 2 x 20 min outside walks with my phone with me and correct installation
  the data GPS on my phone, but the problem is the same, someone else has the same type of questions?

  Look forward to the thoughts of entry or comments, you may have.

  Hello

  Happy new year!

  In addition to the calibration of your watch, it is also important - for more accurate estimates of activity - to ensure that your personal information is correct. To verify that it was entered correctly and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).

  However, it is possible that the numbers you quoted are correct. Even with a relatively sedentary lifestyle, regular movement around the House or at work can soon add up.

  To check the data behind the totals:

  -On your iPhone, in the application of health (not the application of the activity), go to: health Dats (tab) > Fitness > steps.

  -The graph shows your steps per day, week or month (use the tabs at the top to change that).

  -Press show all data to view data for each day.

  -Tap on a day to see each data point, along with the data source (for example, iPhone, Apple Watch).

  When you present data in the dashboard, where data for any particular measure were available from several sources at the same time, the only health of them, app chooses automatically in order to avoid double counting.

• Install PHP5 on Readynas Duo v2 (should work on all ARMS)

  Since I'm not a big fan of paying for things that are easily made by myself, I thought that
  I would like to take the time to write how I went about to install and configure PHP5, MySQL and phpMyAdmin
  on the ReadyNAS Duo v2. (pun partially, although the readynasxtras offer one range of other)
  package, such as opt-in the add-on paid...)

  This assumes you already have EnableRootAccess running.

  1 installation and configuration of PHP5.

  First of all, we need to install the package PHP5 with apt - get. Connect to your NAS through SSH to start.
  We are as safety conscious users (;-)) the root account is disabled for the connection ofc, so we have to
  perform these operations as sudoers instead. Type:

  sudo apt - get install libapache2-mod-php5 php5-cli-common php5 php5-cgi

  Some of the packages will be probably marked as installed or the value manually. This is normal, so just
  Type Y and sit back while than packages being installed.

  After that, he must add the php5_module and trigger php files to be handled by the php5 module.
  Type:

  sudo /etc/frontview/apache2/httpd.conf

  Then, locate the lines loading of modules, for ex.:

  LoadModule perl_module /usr/lib/apache2/modules/mod_perl.so

  Add these lines to this section in the file:

  LoadModule php5_module /usr/lib/apache2/modules/libphp5.so
  Script-php5 .php AddHandler

  Now find this line:

  DirectoryIndex index.html index.htm redirect.html

  and to take:

  DirectoryIndex index.html index.htm index.php redirect.html

  Now, he must restart apache by typing:

  sudo killall apache-ssl
  apache-ssl - f /etc/frontview/apache/httpd.conf sudo

  You should now be able to use PHP on your ReadyNAS!

  I'm going to write a statement about how to install and configure MySQL and phpMyAdmin as well in the
  upcoming posts, but given that I have to go now, to do for the moment.

  See you soon,.
  Simon

  For beginners like me, you can buy https://rnxtras.com/addons/php-5-4-readynas-5-arm
  Worked perfectly fine on my ARM 5.3.10 RND2000

  

• How to remove a 21.5 inch LED-lighting Lenovo $ 3783HB2 monitor arm

  I have tried everything and can't get the arm out of this model of monitor. There are 4 holes for the screws that would suggest that it may be mounted, but the arm seems to be fixed by a solid metal hinge. Any suggestions?

  Hello.

  I was checking the support site for your monitor:

  https://support.Lenovo.com/uu/en/documents/pd025763

  Consulted the manual, it shows the 4 screw holes there. But I'm not sure of the arm, the model showed it shows only the stand.

  https://us.download.Lenovo.com/pccbbs/visuals/ls2223_ug_en.PDF

  Page 18 shows the back of the monitor. The stand has three additional screws inside.

  Explains how to remove the stand, he does not have any arms.

  Concerning

• Arms of paper 5540 HP ENVY

  Hello
  
  It's probably quite a fundamental issue, but having bought just my new HP printer I wanted to check how you reconceal support arm of automatic paper that appears when printing?
  
  Should I just push when I'm done or y at - it a feature or a button to press to do this?
  
  Just, I don't want to damage the mechanism by forcing and cannot find any info on the manual guide or online
  
  Thank you
  
  Nick

  Hi @N7ELLIOTT,

  Welcome to the Forums of HP Support!

  I noticed that you fear that you may damage the extension cord to the tray of your printer all-in-One HP ENVY 5540. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  The output tray automatically extends but does not retract automatically. If you do not want to take the bac unfolded, push in when you are finished.

  For more information, see the User Guide.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• How to Flash an ARM Cortex M3 with a compiled hex file?

  I need to update the flash on an ARM Cortex M3 using the hex file compiled through a JTAG port. I do PCB test fixtures and need to update the firmware, if not later.  I use TestStand and Labview on Windows XP PXI system. I have a DAQ 6289 but you can add modules more if I need to. What would be the best way to do this?

  You work with the LabVIEW Embedded for ARM Module and trying to deploy a hex file created there? Or is this a file separate hex that you want to deploy your surfboard while testing with LabVIEW and TestStand? If you just need to deploy a hex file, you would use a program like rousselinemamiaritiana to push the code to the Board of Directors. This thread speaks of the peaks with external programs called LabVIEW programming methods:

  http://forums.NI.com/T5/LabVIEW/how-can-I-control-PIC-programmer-with-LabVIEW/TD-p/138120?requireLog...

  It is a different material, but probably the same idea, you can use: call an executable that loads the file hex on the Board. You have the program used to push the current software to the Board of Directors?

  Kind regards

• ARM module + PWM LM3S8962 problem

  Hello.

  I'm experimenting with LV2009 + Embedded module for ARM (also the 2009 version).

  (1) what actually works, a few screws, I did (no examples):

  -loop infinite + led flashing + 200ms wait timer

  -infinite loop + number of the current iteration on LCD + 200ms wait timer

  (2) the demos provided in /examples/lvemb/ARM/LM3S8962 sistematicaly (PWM, Blinky, DIO, OLED) fail. Ex: DIO relies, but throws an exception when it is downloaded on the dev. BOAD and executed; PWM does not build (not a filled.ctl or a update.ctl lack of file problem, I fixed) - something related to a PID Subvi. What I'm doing wrong here? Any help? (Note: I also changed the parameter debugger & programmer of the project uVision, the default ULINK2 fails of course).

  (3) PWM EIO problem: I got the first aforementioned VI (1) (LED light MagNet) and added a HIO PWM5, in the same loop.

  -What is the wired to the PWM EIO node value mean? Duty cycle 0 to 100? Duty cycle 0 to 1? The number of ticks to the top state PWM? Sometimes it worked, sometimes the PWM was logical high all the time.

  -If I add a property PWM5 EIO node and try to put anything, it breaks. From what I've seen in the uVision debugger, it gets stuck in the default interrupt handler section. I can't understand how he got there.

  Please help me with an example of how fully configure a PWM EIO, exercising control over the frequency of having to test cycle, everything.

  Thanks in advance for your time & help.

  Paul.

  Hi Paul,.

  This looks like a problem where you (or rather the code generated LabVIEW) set up the device before you activate the device PWM.  The target will fault in this case, but the Simulator will not.  Because that the PWM EIO node initializes and allows the PWM peripheral, if the EIO property node is executed before the EIO node, the target reproach.  Try using a sequence structure to make sure that the node of PWM EIO runs before the property node.

• What is the right method to access the functions in a DLL compiled with a target of THIS (Arm)?

  I tried without success to access functions in a DLL that is meant for Windows CE.  My Labview application objective is a touchscreen the arm-based device.

  All, thank you very much for all your help.  I was still unable to find a method that did not produce an error when compiling... calls for a vi or a C file to be included.  (ex: [feature] is a missing file vi or C).  I also tried including the import library for the DLL, as shown above in the email from Paul, but I still received the same error.  This has been a problem for me, while testing with Win32 non-targets... in this case a device of THIS 5.0 touch screen based on the arm.

  However, I found a solution feasible and quite simple:

  Instead of trying to register the import library DLL as a file depending on the vi, I changed to build a DLL (and associated import lib) to build a static library (.lib) and included while .lib file as a dependent in the build specification.  This had the effect of linking statically, object code rather than wait for the vi compiler to compile the C source code or link a DLL import for a non-Win32 target library.  It is also not necessary to include an additional step in the installation of the DLL on the target device.  The library, I created is just a simple interface to another DLL already on the target device, which had struggled to interface directly to Labview.  Given that it is only a role of simple interface, this solution of library static woked well because it was not essential to have its available as a separately scalable DLL functions.

• Porting to ARM LM3S811, basic PWM i/o issues

  Hi all
  

  OK, so quickly, I take back what I did:

  -The LM3S811: http://www.luminarymicro.com/products/ekk-lm3s811_evaluation_kit.html

  -J' used the generic LM3Sxxxx to create one for
  the LM3S811 by following the instructions in the porting guide for other ARMS controllers to help
  LabVIEW for ARM module, the simple guide.

  -J' got compile a test application and run it
  successfully on my new goal.

  -J' then I used Basic IO Wizard to create the
  necessary files again from the LM3S8962 in LM3Sxxxx generic folder.
  The two boards share almost all the same IOs, I only changed the PWM 0 and 1 to
  use the port D instead of B, PWM 2 to 5 share the same ports, so I t has not changed
  them.

  -J' tested some of the AIOs the GPIO, and I even had the
  Light OLED display driver to work.

  Now, if I use 2 PWM to 5 they work fine, but if I use 0
  or 1, my application freezes as soon as the Basic node IO is called
  my program when running on the target.

  Am I missing something?

  THX

  Lukasz

  OK, found the solution:

  Edition line34 of 'LM3S_Pins.c' to: '#define PART_LM3S811 '.

  and 'ARM_Serial.c' line 24 to: '#define PART_LM3S811 '.

  

  thx for the tip

• My first ARM VI does not compile

  Hello

  I'm a beginner full and just tried to compile the example VI of the "Getting started with LabVIEW Embedded Module for ARM microcontrollers. I understand not all uVision and correlations LV Embededd ARM and the VI does not compile. Here is my system:

  LabVIEW 8.61f1

  LabVIEW Embedded for ARM 8.6

  Keil uVision 4.13 has

  MCB2378 & ULINK2 purchased through the JTAG Board of NOR

  I created the project step by step as indicated in the manual above. Before attemtping to Build/Run the VI 'Processor Status' window shows:

  uVision status: [LED = Blue] loan

  uVision request: [LED = Green] Application

  After I start Build/Run I get "Build error" window saying "failed script uVision build tools. By pressing the button "View error...". "gives me the following result"detailed ":

  Call library function node in UVSC_OpenConnection.vi-> UVSock_Start_Daemon.vi->

  UVSock_Start.vi-> UVControl_Start.vi-> LEP_RV_Build.vi-> LEP_RV_Run_Debug.vi->

  LEP_RV_Debug.VI-> LEP_RV_Run.vi-> LEP_RV_Run.vi.ProxyCaller (7)

  Until I have leave this window "the uVision status led" in 'the processor status' is Orange!

  I would really appreciate help to overcome this situation, I do not understand so I could continue with the chessboard of ARMS by LV instead of via programming uVision. Examples of uVision compile and work OK, so theere must be a problem between the LV-ARM and the native build tools.

  Thank you in advance,

  OK, solved!

  If there is leftover uVision3 or one simply preses in the dialog asking if upgraded to uVision3 model after the first use of the saved in uVision3 - last project there will be an ongoing problem, as initially indicated.

  Just uninstall the two LV to ARMS 2010 and Keil uVision 4 toolchain and reinstall them - it works OK.

  Best regards

• LabVIEW Embedded for ARM - convert to hexadecimal with backslash prior to ASCII

  -LV 2010 with Embedded for ARM module

  -MCB2300

  -COM1 port

  I'm reading in a string of series on this port to a serial device. I'm (for some reason any) read in hexadecimal characters. I can read a byte at a time or all the bytes in the port.

  My chain to come looks like this:

  \D5\8B\D6\EC\AB\D6\EC\FB\F6\FB\F6\EBV\D6\EC\EB (if I read in all at once)

  or

  \DB

  \8B

  ... (if I read in one byte per iteration)

  Anyway I want to convert it to ASCII characters but I can't get the ' \' off at the front of the string. I tried both ways and no work. The outputs are just empty. Any suggestions?

  surprisingly, when I change the 1 to 0 (i.e. Remove) it works.

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• Can LabVIEW Embedded for ARM works with any Board or just with a few predefined?

  Hello

  Can LabVIEW Embedded for ARM works with any evaluation committee or just with a few predefined (MCB2300, MCB2400 and EK-LM3S8962)? I ask this question because even if I chose "another processor" in the definition of the new project only 3 options are the corresponding arm of Phillips and LuminaryMicro.

  Thanks in advance,

  Howdy,

  LabVIEW for ARM supports the feature of targets for tier 1 (the mentioned Evaluation Committee) following this schema:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7066

  But you can transfer to other weapons if you follow this porting guide:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6994

  The uProcesser SDK is intended for the port of other targets of DEPENDENCE (32-bit, of course) and technically it covers ARM as well. Alternatively, there are the LabVIEW C Code Generator: http://sine.ni.com/nips/cds/view/p/lang/en/nid/209015