Arms of paper 5540 HP ENVY

Similar Questions

• HP Envy 5540: HP Envy 5540 will not be printed on A4 photo paper

  As said in the title, the HP envy 5540 which has brought us recently will not print on A4 photo paper. When you try this it will be just the paper jam. It can print on the matte side of the shiny paper but who despises the point to print on glossy paper. Glossy paper in which you provided (10 x 15 cm) works very well so I don't see what the problem is.

  So I thought I'd post a response cela in case someone else wins the same problem. To resolve this problem when you put paper in the tray make sure that it is placed as left as possible. The reason for this is because the paper gets stuck to the right of the printer inside, this is of course because this model isn't try and calibrate the book itself just cause, it assumes that the Board is good enough.
  If this still does not work then I recommend that once in the basic printing options, select photo paper (HP or not depending on what you have). More there are also in Control Panel > display devices and printers and right click on the printer model you are using, and then select Printing Options. Then, check the orientation of the layout and for verification of the quality of the paper / source paper and media for what you feel would be good for you.

  Hope this helps someone else who has this problem because when I looked around I saw never the solution.

• HP Envy 5540: HP Envy 5540 out of paper message

  I bought a printer ew Frys Electronics n.  I don't have to open the box and tries to use it for about a month.  It would not print from the computer, rather a post that it was paper.  I followed all the online and packaged suggestions for resolving the issue.  Frys has refused to accept it because it had been the date of return.  HP is impossible to reach a human being, and none of his 'support' does not work.  Don't send article to Frys and throw it through a window, what can I do to get this working of the machine?

  I was finally able to contact customer support and they solved the mystery. The CD that came with my printer does not include Windows 10. The person who has solved the problem took control of my computer, completely removed the old programmes, reloaded suitable driver and confirmed that everything was fine. Hats off to HP customer care!

• HP Envy 5540: HP Envy 5540 does not scan

  Hello

  I just bought an all-in - One HP Envy 5540 and installed on my PC running Windows 7 Home Edition (64-bit).  I did the whole upward online and printer and copier work without problem.  But the printer won't scan to my PC.  (I use a USB, is told by the way).

  When I press the icon 'Search' on the printer, I get an error message that says: "no computer found."  He then gives instructions to "open the HP printer software, select Actions 'Scan' and then select 'Manage the computer analysis'."  The only "software" I can find is the downloaded "printer Assistant", who does not have a tab "Scanner Actions."

  I tried to download the "Scan" doctor and still running the 'fix', but it did not work after following all the instructions, including unplugging them, restart the PC, etc.

  Any ideas I can try please?

  Thank you.

  PS update: after a stop during the night, today - when I press 'Analysis' - the printer is set up a list with my computer upstairs (another entry said "no computer not listed").  When I press the icon for my computer, I get a brief 'access... '. "message as he tries to connect.  I get then a message saying "connection required.  The selected computer is not available.  Ensure that:-l' computer is turned on; -l' computer and the printer are connected properly with a cable USB; -the recommended HP Print software is installed and configured on the computer. »

  The only one I am uncertain is the last of them - but I guess he has everything installed and configured, because everything else seems to work.

  Still stuck!

  Hello
  
  Thank you for using the HP Forums.

  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5540-all-in-one-printer-series/5447939/model/5447940#Z7_3054ICK0K8UDA0AQC11TA930C7

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer
  
  Hope that helps!

• Envy 5540: 5540 HP envy not printing

  I just bought a HP ENVY 5540 printer.  I spent almost 7 hours trying to get this setup of the printer.  The wireless to the printer light is solid.  I tried everything to get this printer to print.  Printing failure rises.  But I can print test HP page.  Someone at - it similar problems with the 5540 envy?

  Hello

  Thank you for using the forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• HP Envy 5540: HP Envy 5540 connect after upgrading the motherboard

  I bought a HP Envy 5540 a month ago.  Installed fine on Windows 10, full software, all features runnning well etc.

  I had to update the motherboard on the weekend. made when the software did not work properly, gave options to connect wireless and USB printers only. Tried uninstalling and reinstalling several times, not better.

  Printing HP Scan DR detects the printer, but says he isn't connected and downloads and runs the installation of the complete software that gives only to a USB connection and wireless options. HP EasyStart also believes that it is, so try to do an installation of the software which again gives options to connect printers connected USB or wireless. Whatever I can't do the wired ethernet connection option I received previously.

  Since this circle 3 - 4 times.

  I'm guessing this has to do with the fact that the new motherboard has a new network controller (RealTek), but I can't find any problems. Everything else works well.

  Any help and advice would be much appreciated

  Hello

  Thank you for using the forum.

  Suggest the following:

  1 uninstall the software.

  2. download software COMPLETE features of this link to win 10 (if you have already done this, skip this step):

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5540-all-in-one-printer-series/5447939/model/5447940#Z7_3054ICK0K8UDA0AQC11TA930C7

  3. go to your printer and network to restore the default values.

  > Go to settings

  > Network configuration

  > Restore default network

  4. connect your Ethernet network cable

  5. install the FULL features software

  6. in connectiviy screen, select 'wired (Ethernet).

  7 printer should be able to be found

  8. complete the installation

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• HP Envy 5540: HP Envy 5540 0XB80005E0 error Code

  Print a document... No black lines.  Changed the black print cartridge (HP original). Load new paper. Printer tried to "align" so I pressed OK.  Some swirling noise.  The printer screen says, "CODE of ERROR 0XB80005E0.  What the hell that is.  Cannot find this code anywere on the internet.  Someone please find a fix.  I have a bunch of documents to print.  H E L P!

  Hello

  Please try the steps below...

  1. While the printer is on, remove the ink cartridges and unplug the power cord from the back of the printer.
  2. Shut down the computer.
  3. Power Off the Wireless router.
  4. Wait 30 seconds.
  5. Now plug the power cord of the printer only. When guests of the ink cartridges installed.
  6. If the error is got to step # 11
  7. Now switch on the PC.
  8. If the error is got to step # 11
  9. Turn on the wireless router.
  10. If the error exists contact ISP and check for updated firmware for the wireless router.
  11. If the error exists, then it might be a problem of printer hardware. Please contact HP Technical Support for more assistanace (USA-1800-474-6836)

• Paper jams HP Envy 4500 address label

  Can I get help with an HP Expert. It doesn't seem to be anyone on the Forum who knows my problem. He just bought it and when I tried to print address, immediately stuck labels. Please notify.

  Hello

  I understand when you try to print labels that they jam immediately.

  Here is a document to set preferences for the label paper. These steps work for a different application you are printing from.

  http://support.HP.com/us-en/document/c03275134

  I have included a document for paper "rocker". If it is not block later when using plain paper, then you will not need to follow this document.

  http://support.HP.com/us-en/document/c03754704

  I hope this helps.

• HP Envy 5660: see use of paper on hp envy 5660 or PC screen

  I would like to know how to see how many copies I printed out on the printer or PC display.  I don't want to print a printer status report whenever I check.

  Thank you.

  @Boulderdon

  Printer:

  Printer e-all-in-one HP ENVY 5660

  Full software features:

  File name: EN5660_117.exe

• HP envy 4520: extension of the HP Envy 4520 jammed paper tray

  Extension of the tray jammed paper closed on envy hp 4520, can not print, help!

  Hi @chics,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a printer all-in-One HP ENVY 4520 with a 10 Windows PC and the printer paper tray Extender is stuck in the closed position. I would like to help with that.

  First perform a reset of the power on the printer.

  

  Then try to make a copy using the control panel of the printer to see if the tray Extender will extend.

  Please let me know if that solves the problem, or if you need assistance.

• HP Envy 5532: HP Envy5532 not feed photo paper.

  The printer will not feed the paper through. Looks like it's printing, but finally, a message will appear that it is locked. When I opened the top, he did turn upward in the printer, but it is still in the back and can not affect on print.  I tried the Kodak photo paper and paper HP photo with the same problem.

  (1) I had the instant situation of resolved ink.

  (2) I watched a YouTube video on my particular printer, on all the parts and how to remove them and put them backwards. I realized that the problem was and he stares at me. Cover the path has not been TRIGGERED. When I pushed him down and SNAPPED into place, it resolved photo paper feeding problem and I was able to print photos without problem.  Fixing a paper jam - HP ENVY 5530 e-All-in-One Printer - YouTube https://www.youtube.com/watch?v=3dO4sPaKjSU

• 4500 envy: Envy 4500 will not be printed on photo paper

  I have a 4500 Envy will be printed on plain paper but as soon as I load photo paper it will not print on it.  I tried different manufacturing of paper and he'll come, but then just smears on the back with nothing on thr front while others, he just tells me to load paper.

  Hi @JimMackie,

  Please try these steps and getting back to me.

  Because the printer does not have the paper, I would recommend to try the steps listed in the document below. You can start to "Solution 2: adjust paper settings in the print driver.

  A Message appears "Out of paper" for HP ENVY 4500 and Deskjet Ink Advantage 3540 e - all-in - One Printer Series "

  If you arrive at "Solution 4: service of the printer", then I would recommend contact you HP.

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Scanner printer Envy 4520: don't go back not envy 4520 holder

  Hi have a HP Envy 4520. The arms of paper comes out but dosent auotmaticly back to the printer after that I have remove the paper?

  Welcome to the HP community @Richsand007,

  The paper on the 4520 desire support arm is spring loaded so it can only extend automatically. To retract the arm manually, you have to 'push' the arm back, because there is no component built into the printer it retracts automatically.

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP envy 5660: Quilting

  Pouvez HP envy 5660 print on fabric formwork used for quilting?

  Hello

  Thanks for the comments.

  Personally, we have tried to use the roofing material you have posted, but it was printed on a portable printer (HP Deskjet 460) that has a different paper path than Envy 5660.

  The 5660 uses a path to the document of U and there might be a chance that quilt paper may jam.  (the mobile printer is the papr path)

  Thank you.

• 501: Officejet vs envy

  I'm looking to replace my dying 501 c. Is there a fundamental difference between the envy line and Officejet printers.  I can't find anything that makes this clear. I'm looking for line-by-line on the sheet. Anyone know or knows where I can find? Thank you

  Printers Envy focus more on the release for consumption.  The inks are usually pigmented black and dye according to color, which provides a better photo print.  Envy printers have a bin of photo for photo paper loading and Envy printers are more likely to support printing without margins. Officejet models are more concentrated for the office.  They can use pigmented ink black and all colors.  According to the model, there may be options on the additional paper trays for Officejet printers.  The Officejet models are more likely to have automatic feeders of Document Scanning or copy a stack of papers more easily.  Some Officejet models will do auto scan both sides.  Officejet models want have usually two sides printing capability.  Officejet models often include faxes of support.

  On how many pages per month you expect to make?  Do you need to print photos?