AS3 - bring an object to the front without using 'addChild '.
I need to create a menu buttons which expand & overlap on rotation. These menu buttons jump the user to the frame of the scenario. In order to ensure that the buttons do not get covered by the other, I use the excerpt "to object to the Front.
The code snippet adds selected on the front of the stage as planned, but that is using 'addChild '. This means that the buttons that are renewed are now visible from each image in the timeline. Is there a way to put a button on the front of the stage without replication is done by an extra child?
See the screenshots for a Visual.
Thank you very much!!!
Add all buttons to a parent movieclip, which exists only on the image where you want that they exist (and be seen).
You can then apply the addChild method to that parent.
Tags: Adobe Animate
Similar Questions
-
button clicked brings an object to the front
Hi guys,.
so I currently have a set of buttons that when clicked, make certain visible items. These objects are layered, and I want to bring everyone forward when the button is clicked, but I fight with the code snippets for "foreground" - I'm pretty new to actionscript, so child stuff is a bit confusing
Basically, what I want is this:
button.addEventListener (MouseEvent.CLICK, showobject);
function showobject(event:MouseEvent):void
{
code to place the object at the front *.
}
Thank you!
There are two ways I can think to be coming forward...
button.addEventListener (MouseEvent.CLICK, showobject);
function showobject(event:MouseEvent):void
{
addChild (objectName);
or
setChildIndex (objectName, numChildren-1);
}
If objectName is replaced by any instance name you assign to the object
-
What creative programs cloud must be purchased to create a Web site, where purchases can be made on the site, without using a third-party Web site?
as mentioned there are several adobe programs that could be used to create your website from the front-end. There is none that would be used to create the back-end.
all front-end creative programs are able to add the features needed to communicate with your Web site main.
WordPress is a content management system, but also the design Web site handles so I'm not sure it makes sense to invest in programs oriented primarily as adobe design and use wordpress.
-
How to set CC at the beginning of the project without using the CC button?
How to set CC at the beginning of the project without using the CC button? I want CC which by default and allow users to turn off if they do not need.
Hi again,
If you have a Standard Action, then just add a literal Assign cpCmndCC with 1 line. You can also follow what says Lieve, just add a short blade and apply the action on the second slide. Also if you have objects on the slide which advance to the next slide and then not using OnExit measures.
Thank you!
-
Background color of sequence, the value without using a video track
Hi, I can set the background color of a sequence, without using a video track of a white image file or as... I guess this should always made when I saw. Also the idea of the project is a white bgd and evrything with an alpha channel must key in front of a white background... the same account for all texts... + I don't want to lose the highest video track in the vertical center of the timeline for 1 substantive item unique.
Seems to be a very standard task that needs to be used very often, if people use the first for multi media movies.
Heaven can't given an option of background color in the sequence settings, project settings or Edit/Preferences... F1 or google pulls a lot on the inlay or layering, but when it comes to the simple question to set the background color of the sequence without using a video track for her... found nothing.
Does anyone know if and how it works?
Kind regards
Frank
The BG of each track in the sequence is ALPHA. That is to say. There is no color.
You neeed to use a matte color for what you want to do.
-
How to view NTUSER. DAT file as to the registry without using it?
How to view NTUSER. DAT file as to the registry without using it?
The file is from a different Windows instalation!I have Win 7 but it comes from my old Windows xp.Hi Leonnis,
There are many ways to read the registry file without using regedit.Some ways:RegLookup: RegLookup project is dedicated to the direct analysis of Windows NT registry files. RegLookup is distributed under the GNU GPL license and is implemented in ANSI C. RegLookup provides a C API, a Python module and command line tools to access registry data structures.Download here: http://projects.sentinelchicken.org/reglookup/RegViewer: Is GTK 2.2 based registry Windows GUI file browser. It is platform-independent for the review of the files of Windows registry from any platform. Particularly useful in forensics files Windows of * nix systems.Download here: http://regviewer.sourceforge.netRegRipper:
RegRipper is an application of forensics software open source developed by Harlan Carvey. RegRipper, written in Perl, is a tool for extracting data from Windows registry.Download here: http://regviewer.sourceforge.netKRegedit:kregedit is a KDE utility for the visualization of the native Windows registry files. It is similar to the regedt32 utility that is found on most Windows platforms. Only the format of the NT (NT4/2000/XP) registry is supported.Paulo BreimCentro Brasileiro PericiaHelp, please!
-
How to set a component at the bottom of the screen without using setStatus()
I created a custom horizontalFieldmanager and want to put it at the bottom of the main screen in my application. My custom horizontalFieldManager contains three fields of bitmap... help me please put it at the bottom of the screen without using the setstatus method.
OKS... If it is finally... Thanks for the help
-
help in the application without using the pivot function
Hi gurus,
Can you please help write the query without using the PIVOT function.
Thanks in advance!...WITH indata AS (SELECT 1 sn, '123:456,789,323:456,213,344,345:5454' x from dual UNION ALL SELECT 2, 'abcd:fgrfr,rfrf,rfred,tg:tg,tg:ophhh,op,vdfgbh:poijn' x from dual), instr AS (SELECT a.SN, rownum RN, B.column_value || CASE WHEN B.column_value NOT LIKE '%:%' THEN ':' END column_value FROM indata a, TABLE(CAST(multiset (SELECT trim(SUBSTR(x, (CASE LEVEL WHEN 1 THEN 1 ELSE instr(x, ',', 1, LEVEL - 1) + 1 END), (CASE instr(x, ',', 1, LEVEL) WHEN 0 then 4000 ELSE instr(x, ',', 1, LEVEL) - 1 - (CASE LEVEL WHEN 1 THEN 0 ELSE instr(x, ',', 1, level - 1) END) END))) FROM dual CONNECT BY level <= LENGTH(x) - LENGTH(REPLACE(x, ',', '')) + 1) AS sys.odcivarchar2list)) b) SELECT col1_val2, col1_val1, col2_val2, col2_val1, systimestamp FROM (select SN, ROW_NUMBER() over(partition by SN order by RN) RN, SUBSTR(column_value, INSTR(column_value, ':') + 1) VAL1, substr(column_value, 1, instr(column_value, ':') - 1) val2 FROM instr ) PIVOT(MAX(VAL1) VAL1, MAX(VAL2) VAL2 FOR SN IN(1 as col1,2 as col2));
Any help would be appreciated.user590978 wrote:
Can you please help write the query without using the PIVOT function.
with indata as ( select 1 sn,'123:456,789,323:456,213,344,345:5454' x from dual union all select 2, 'abcd:fgrfr,rfrf,rfred,tg:tg,tg:ophhh,op,vdfgbh:poijn' x from dual ), t1 as ( select x from indata where sn = 1 ), t2 as ( select x from indata where sn = 2 ), t3 as ( select level lvl, substr( x, instr(',' || x,',',1,level), instr(x || ',',',',1,level) - instr(',' || x,',',1,level) ) col1 from t1 connect by level <= length(x) - length(translate(x,'A,','A')) + 1 ), t4 as ( select level lvl, substr( x, instr(',' || x,',',1,level), instr(x || ',',',',1,level) - instr(',' || x,',',1,level) ) col2 from t2 connect by level <= length(x) - length(translate(x,'A,','A')) + 1 ), t5 as ( select lvl, substr(col1,1,instr(col1 || ':',':') - 1) col1_val1, substr(col1,instr(col1 || ':',':') + 1) col1_val2 from t3 ), t6 as ( select lvl, substr(col2,1,instr(col2 || ':',':') - 1) col2_val1, substr(col2,instr(col2 || ':',':') + 1) col2_val2 from t4 ) select col1_val1, col1_val2, col2_val1, col2_val2, systimestamp from t5 full join t6 on ( t6.lvl = t5.lvl ) order by coalesce(t5.lvl,t6.lvl) / COL1_VAL1 COL1_VAL2 COL2_VAL1 COL2_VAL2 SYSTIMESTAMP ---------- ---------- ---------- ---------- ------------------------------------- 123 456 abcd fgrfr 23-OCT-12 11.50.12.015000 AM -04:00 789 rfrf 23-OCT-12 11.50.12.015000 AM -04:00 323 456 rfred 23-OCT-12 11.50.12.015000 AM -04:00 213 tg tg 23-OCT-12 11.50.12.015000 AM -04:00 344 tg ophhh 23-OCT-12 11.50.12.015000 AM -04:00 345 5454 op 23-OCT-12 11.50.12.015000 AM -04:00 vdfgbh poijn 23-OCT-12 11.50.12.015000 AM -04:00 7 rows selected. SQL>
SY.
-
Is it possible to start and stop the servers without using nodemanager?
Is it possible to start and stop the servers without using nodemanager? If so, how?Hello
Please follow the link below, it will be useful
http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_
Concerning
Fabian -
Requirements Gateway - objects on the front panel
Hello
I'm about to start using the gateway requirements and I have a few questions to help me go...
1. If I create a vi on a machine without RG installed and then move it to a machine with the Receiver General installed, will be always recognized tags?
2 - RG recognize the syntax [covers XX] if it's on a façade and not the block diagram?
Thanks for your help.
Darren.
I know a little RG.
1. Yes.
2 RG will scan the three areas of a VI for references: VI Description, control/indicator Description and diagram commentary (free labels). That's why he won't see a reference on the front panel (for example data text or text of the label or a caption).
-
How to transfer an object to the front or rear of another object?
Hello
I have a problem with the appearance of the design of the program. Can you help me?
When I draw an appearance by my objects in labview, some of them were riding together. but one of them should be at the front or rear of each other in unexpected ways. now, how can I change their situation from the back to front or rear?
Best regards.
CTRL + SHIFT + J and Ctrl + Shift + K to move to the front or rear. CTRL + J/K to move forward or backward.
-
How to hide objects of façade behind other objects on the front panel
Hello
To put it simply I want to just hide certain objects behind other front and I need tho change an existing project. But I can't find how to put the one that I wnt forward by hiding all the others. So now, there are some face that should be hidden.
Is there a menu item or button "move forward / back" as in many other programs?
Thank you
Martin
"Menu button" isn't really the typical expression. Toolbar button is most appropriate.
Here's an image I posted in another thread, I've been in yeserday it shows.
-
Updates an object in the cache without
Hello
I need to know how it is possible to update/modify an attributes object cached regular?
is this NamedCache.put () method only to replace the old value...
I would like to spare the cache-> GET change attribute locally-> cache, because I already know what to change in the objects.
My topology: none hides near / local is set up, I work with consistency * extend tcp (out of process)
Thank youHi Reem,
There are several ways to change the data cached within the cluster without doing a get / put from the client. The simplest, and probably what you are looking for, would be to use EntryProcessors.
http://download.Oracle.com/docs/CD/E14526_01/CoH.350/e14509/transactionslocks.htm#BEIJCGDFYou can use an input processor to update an entry to a specific key or rather than at the entrance of all you can also update the attributes of an entry.
JK
-
How can I place a new element behind an old object on the front
is there a ' it forward "or"behind"button. right now I just cut and paste the old item in front of the new element, but not a good way to do it... If it's a var shared in a loop, it may fall back in the wrong place on the block diagram when I stick it back in the front panel.
Yes. There is an "Order" button in the toolbar.
-
Developer of forms 4.5 - bring item displayed in the front when running
I have 10 items displayed square lined with 2 x 5 to represent a form of rectangle on my form. Individual display elements represent 10 posts on a pallet. Other display items are then used to represent an item it takes placed on a position on a pallet, so affectivly your dragging a point display ontop of another element of the screen.
My problem: it allows you to drag the item on it but it will not allow you do the reverse. Even if it looks like your selection of the top which is under discussion, forms think your draggin the square behind him? How can I change the focus of the display elements when running?I hope that your PC does not fail. You might have trouble to install forms 4.5 on Windows 7 or 8 platforms.
If I remember correctly, the only way to really check that an item displayed at the top of all the others is to put it on his own Web stacked with the same dimensions as the element. You can move the canvas integer autour rather than on the question, and if the focus is ON the element (by using go_item, for example), while the point will be on top of all the others.
As soon as another element receives focus which is located behind the canvas, the canvas will disappear.
Maybe you are looking for
-
Has no way to copy or export of username, passwords, or Web site in the Firefox password manager.
-
Qosmio G50 - error fingerprint sensor
I have two major problems on my computer Qosmio G50 - 10V. (1) fingerprint sensor does not work on my computer. When I try to create a fingerprint, fingerprint sensor, the error is not reached, so I can't record of fingerprints.(2) quad Core hd proce
-
to limit the input in the xcontrol string characters
Hello I followed an example online at deveope an xcontrol for the input string, but limit the input only characters for capital letters from A to Z. I have the main code as follows In the key to the bottom of the event, I throw all input character wi
-
How to change my Office information?
I can't change my wallpaper. How to change pls help me?
-
someone at - it similar problem? can set if XP and VISTA?