ASA 5500 series as a customer VPN SSL

Similar Questions

• Cisco ASA 5500 Series 4-Port GE SSM

  Currently, we have 2 asa 5510 firewall and need to add the

  Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

  Hello

  You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance.  The team of firewall is located here:

  https://supportforums.Cisco.com/community/NetPro/security/firewall

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• Cisco ASA 5500 Series end of life

  Hello

  I noticed that all 5500 series (5510,5520,5540,5550,5580) ASAs are all end-of-life announced in March 2013. However, I don't see ASA 5505 on the list. Can anyone confirm that 5505 EOL has not announced?

  http://www.Cisco.com/c/en/us/support/security/ASA-5505-Adaptive-Security...

  Thanks in advance

  The 5505 is not yet announced EOS/EOL, but the announcement can * t be extreme as 5506-X will be available soon (well, I hope... ;-)).

• 3005 & customer VPN SSL gone?

  I upgraded from 2 3005 to vpn3000 - 4.1.7.Q - k9... after that my SSL VPN client options are gone, used to be: Configuration | Tunneling and security | WebVPN | VPN SSL Client...

  This get removed from the latest releases and now I only have the mode of transmission by SSL VPN proxy on of the 3005? Can't seem to find it in the release notes...

  Razor head

  The problem you are having is due to the upgrade to 4.1. *, which is not the software package you need. You were previously using 4.7. *, which is the right one for SD/SVC.

  Ken

• site to site vpn with ASA 5500 series SSL?

  We have routers DLink DIR - 130 5505 s ASA and PIXen, all work well with our PIX 515E, we need to replace.

  We also have Internet satellite in two places. High latency makes IPsec VPN to DLinks on these very slow sites.

  We were informed by HughesNet that a SSL VPN will mitigate some of the problems of latency.

  However, we cannot use a VPN client for the biometric timeclocks in these places, the clocks need static IP addresses and are more or less "dumb terminals".

  The machine of series 5000 ASA VPN site to site similar to OpenVPN or only the most comment client-server type SSL VPN connections?

  Thank you, Tom

  Hi Thomas,

  The SSL VPN on ASAs feature is a client/server relationship where the remote computer can connect without client (browser) or clientbased (AnyConnect) to the ASA.

  Federico.

• Customer VPN SSL IOS on Vista

  Hello

  I've implemented a SSL VPN on a 877 router. It has been tested with an XP laptop. Now, the laptop has been formated in Vista and I get this error "Setup could not start the Cisco Client SSL VPN.

  For more information, contact your COMPUTER administrator. Click here to log out. »

  I watched some old news, and it seems that in the past, client SSL VPN will not work under Vista. However, that display was quite old.

  Someone at - he managed to make it work on Vista?

  I had exactly the same problem outside my router is a 2811.

  The Cisco SSL VPN client is not supported on any taste of Vista - you must upgrade to the Anyconnect client.

  I used the anyconnect-victory - 2.3.0254 - k9.pkg

  I also found that SDM does not recognize this as a valid client SSL so in order to install I did the following via the CLI

  1 tftp flash the router package

  2 uninstall the existing customer with

  No webvpn install svc flash:/webvpn/svc_1.pkg sequence 1

  3. install the new package with

  WebVPN install flash: anyconnect svc - win - 2.3.0254 - k9.pkg

  After that I reconnected it my broken vista client and it worked like a charm.

  As well, as I was running 12.4 (20) T I am now able to use the anyconnect offline client - that is, I don't have to log in via a browser.

• Back on the cisco ASA 5500 series and PIX 500 series

  Hello

  I fund a site www http://www.searchsecurity.de/themenkanaele/plattformsicherheit/schwachstellenmanagement/allgemein/articles/106752/ (only in German). I have read that it is possible to make a denial of service on cisco PIX 500 series and series 5500 ASA, when the TTL value is enabled.

  How can I check that? or solve the problem?

  I thank you,

  Mary

  What version of the code you run the Pix or ASA. Refer to the "Products affected" section for more information on versions and the products concerned. This should point you in the right direction.

  Also, listed in the URL is bypasses and fixed Versions that you may want to check.

  Kind regards

  Arul

• CISCO ADAPTIVE SECURITY APPLIANCES ASA 5500 SERIES

  Hello

  I'm doing a comparison of the above with other offers from different providers.

  Can someone tell me if the firewall feature of this device actually runs the full version of PIX OS 7.0.

  Flipping through the manual, it does not mention PPTP with MPPE or L2TP with IPSEC support while I'm reasonably sure these two would be supported in a pix running OS 7.0

  Thank you

  Paddy

  The PIX and ASA are running the same code, no difference. The reason why you don't see PPTP and L2TP/IPSec mentioned is that these functions have been removed from code of v7.0 PIX / ASA, mainly because they used very little and they need space for the more 50 new features that have been added. It is detailed here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_70/70_rn/pix_70rn.htm#wp119169

  The ASA actually gives you some extra with 7.0 features that works on a PIX is not, like WebVPN (SSL VPN), load balancing VPN and support the onboard SSM (IDS/IPS).

• ASA 5500 x new anyconnect VPN license structure

  I wonder if anyone can give me some insight on the new ASA VPN (SSL VPN) structure of license.  Currently, I have anyconnect premium license installed on the ASA 5500 series but want to buy the same type of license for x ASA 5500 series.  I understand the premium license is required for SSL VPN and webvpn.  Can someone find out if the premium anyconnect and anyconnect essentials license has been replaced by the Cisco Anyconnect Apex licence?

  The new AnyConnect Apex maps old Premium licenses. They are now focused on the term (1, 3-5 years) and have been approved by a single user (regardless of the number of devices) vs. concurrent users on the old regime.

  Apex (or the old premium) is required for clientless SSL VPN. Regular-based on the SSL VPN client AnyConnect requires no Apex but can be done by using only more licenses.

  The new AnyConnect Plus is the old Essentials plus mobile licenses. There is an option of perpetual and based on the duration.

  By single user licensing is a terms and conditions / EULA stuff and not enforced by technical means at the moment.

• Cisco ASA 5500 CSC-SSM-20 Series

  How many subscribers maximum, sessions, licenses are allowed using Cisco ASA 5500 Series CSC-SSM-20 on ASA5540 module

  Use the following command 'See - activation key' to get maximum subscribers, sessions, details County licenses.

• Cisco ASA 5508 with firepower of speeds VPN

  Nice day

  Can someone tell me which is better performance Anyconnect VPN or Cisco VPN?, I intend to use a VPN for my users to connect and transfer files to a shared folder speed does.

  Also, I don't want my clients to access a Web page or portal to get the client I can install the VPN client on the client labtop.

  Is it possible to do this as well?

  Hello

  The shared screenshot has the correct option is selected.

  Yes anyconnect supports IPSEC thus:

  https://supportforums.Cisco.com/discussion/11501221/Cisco-AnyConnect-DOE...

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Please visit this link for the plug ASA 5508-firepower:

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• ASA 1000V and ASA 5500

  I hope someone can help me to answer this question:

  Currently, we have redundant FWSM and consider a migration of standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and look at the Nexus 1000V. I understand the Nexus 1000V and ESR architecture and implementation, and I don't understand that the ASA 1000V is designed for cloud environments. But I have a question about the ASA 1000V.

  Is it possible that a firewall series ASA 5500 be replaced by ASA 1000V? Basically, can an ASA 1000V to be a single firewall solution, or are that ASA 5500 is always necessary?

  Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?

  Thanks for your help.

  -Joe

  Depending on what you are using the ASA5500 series for now. If you use the ASA5500 for the remote access vpn and AnyConnect VPN, he will not rely on the first version of the ASA1000V yet.

  Here's the Q & A on ASA1000V which includes more information:

  http://www.Cisco.com/en/us/partner/prod/collateral/vpndevc/ps6032/ps6094/ps12233/qa_c67-688050.html

  Hope that answers your question.

• ASA 5500 model

  Hello

  Can what ASA 5500 model I use to replace my PIX515E companies with 6 interfaces.

  Hello o.oresotu,

  Looks like the Pix 515E Flyway is the ASA 5510.

  Take a look at the following links.

  Cisco ASA 5500 Series Migration quick look

  http://www.Cisco.com/application/PDF/en/us/guest/products/ps6120/c1031/cdccont_0900aecd80322caa.PDF

  Licenses for features and specifications

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_guide_chapter09186a00806b1c1c.html

  Hope that helps! If Yes, please rate.

  Thank you

• ASA 5500 10 GB

  ASA 5500 series safety devices does support 10 GB?

  Hello

  10 GB is currently not an option:

  http://www.Cisco.com/en/us/products/ps6120/prod_models_comparison.html

  HTH

  Andrew.