ASA 5500 - to access the headquarters SSL VPN users

Similar Questions

• prevent the SSL VPN user to access ASA cli

  Hello

  I set up multiple users on my ASA in its local database.

  These users are used for the ssl vpn connection, but the problem I have is that users

  also have SSH access. Is it possible to avoid this?

  Thank you

  Hello Raf,

  If you do something like this:

  username xxx attributes

  type of remote access service

  the user should not get access CLI more.

  Kind regards

  Bastien

• ASA from Site to Site and SSL VPN stop working

  Thanks in advance for any advice

  We have an ASA 5510, users were able to connect via to all connect without any problems. We opened a new office with an ASA 5505 and decided to give VPN site-to-site on IPSec. We used the basic wizard and everything went smoothly at both ends. However, users who always used SSL VPN says so that they can connect to the original site, they are no longer in their RDP virtual machines or get anywhere on the network. I don't know why something like this can happen.

  You can change the SSL VPN DHCP scope to give a different subnet for IP addresses. Maybe try 192.168.10.0 255.255.255.0. Let me know if you can and if that corrects the issue.

  Sent by Cisco Support technique iPhone App

• File shares of some non-visible windows through the clientless ssl vpn

  Hello

  I have an ASA 5505 with the SSC module and were able to get the ssl vpn upward and running, for some reason, some of the shared folders do not appear when I connect. I checked permissions for shared folders which can't be compared to those who do, and they are exactly the same.

  Thank you

  Chauncey

  Don't forget to note the positions that helped you and mark it as resolved if this addressed the issue. Thank you!

• Authentication of the certificate SSL VPN

  Hello

  I change SSL VPN of aaa aaa authentication and CERT, Server 08 CA, 8.2 ASA 5510 ssl client 2.5.1025 and Windows 7 users. My question is what should be the model for the cert id I get from CA.

  Thank you

  Marie Laure

  You can use a web server for the certificate for the ASA model.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Router Cisco ASA or IOS may be a SSL VPN clinet?

  I would like to know if the router Cisco ASA or IOS may be a customer of SSL VPN? Thank you.

  I'm glad to hear that.

  Indeed the ASA5505 and Cisco routers can be EzVPN customers.

  Please mark this question as answered if you have any other questions.

  Let me know.

  The rate of any position that you be useful.

• Access Internet through SSL VPN (WebVPN)

  I have my ssl vpn works on my router from 1821. I have connection and can move through my internal network. But when I am connected I can't browse the Internet web pages... looks like that may be a DNS issue? When I try to ping it looks that it resolves the name only does any traffic.

  Are you trying to tunnel all internet traffic through the SSL VPN as well, or you do split tunneling?

  For split tunneling, here is the sample configuration:

  http://www.Cisco.com/en/us/docs/iOS/12_4t/12_4t11/htwebvpn.html#wp1056267

  (you need to add the 'split svc include ')

  Hope that helps.

• ASA 5510 Auth for site-to-site VPN users

  Hello

  is there a way we can get the ASA to prompt users VPN site-to-site to authenticate on ASA/RADIUS before access resources head behind ASA such as Sharepoint etc allowed in via respective VPN ACL?

  I never did, but you should be able to use authentication 'Cut Through'.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/113363-ASA-cut-through-config-00.html

  Basically, the user has little or no access, and the ASA intercepts a request, such as via HTTP and then authenticates the session.  After that the user can access all that you allow them.

• Problem with users accessing the CIFS; sent anonymous user name.

  I am running on a Cisco ASA 5500 WebVPN.

  The ASA version: 8.0 (4) 8

  ASDM Version: 6.1 (5)

  I have a setup of CIFS share. I'm a domain administrator on our AD 2003 domain and when I connect to the VPN, I click on the CIFS and invited my user name and password. When I enter the username as DOMAIN\account and password, I am able to browse the CIFS share.

  However, when I have a user that is not a domain administrator to perform the same task, get an "Authentication failure" error and cannot access the same CIFS share.

  I checked the event viewer on the server and I see that when a domain user tries to access the CIFS share is to launch an event ID 529, and the passed username is anonymous and not their domain\account name.

  I checked my account so the other user accounts, and our primary group is the domain users.

  Does anyone have any suggestions?

  It comes from looks like this might be quite related to the CSCsk91498. After the instrumentation of code, I saw the username being poorly analyzed and defined as the host when there are special characters in the password (I have tested with ' # '). If you have the character # (or possibly other special characters) in your password this is the same problem. Even if the two could still not be linked.

• ASA does not propagate any routes for VPN users

  Good afternoon

  I m a problem concerning the spread of the roads to authenticated VPN users through the asa tunnel-group.

  I have a VPN-users-pool where my users receive their IP address, and after authentication and the tunnel is established the idea is that the user get to the networks defined in the following ACL:

  access-list within the standard allow 10.1.0.0 255.255.0.0

  access-list within the standard allow 192.168.15.0 255.255.224.0

  Now, the problem is that, after the tunnel is set up the only way, that the user receives is the default route (which is not supposed to be sent). The user does not receive the roads specified in the ACL list above. It has not received the network mask and assumes one 8 netmask (given that the pool of network from where it receives the IP address is a class A network).

  Network routing works as expected (when I add the static routes directly to PC users, everything works OK). It s just the matter of the ASA do not spread the roads as it should.

  Here is my split tunneling settings:

  attributes of Group Policy DefaultRAGroup

  VPN-idle-timeout 1

  Protocol-tunnel-VPN l2tp ipsec

  disable the PFS

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  attributes of Group Policy DfltGrpPolicy

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  Any ideas?

  I have apreciate your help

  Best regards

  Just a question, I see:

  attributes of Group Policy DefaultRAGroup

  Protocol-tunnel-VPN l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  internal DefaultRAGroup_1 group strategy

  attributes of Group Policy DefaultRAGroup_1

  Split-tunnel-policy tunnelspecified

  It looks like your policy

  DefaultRAGroup_1 you set ACLs and the other doesn't seem to be for L2TP/IPSEC. How do you connect to the ASA, using L2TP/IPSEC or Cisco IPSEC client? In addition, if your users are devoted to this group policy:

  DefaultRAGroup_1 it looks like the acl is missing for the split tunneling

• cannot access the files of another user with the admin account

  I'm on a computer with Windows Vista 64-bit home problems.
  I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
  Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.

  I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
  Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.

  I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.

  What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?

  What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?

  How can I use the powers of the administrator to access other files (regular) user?
  Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.

  I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
  I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.

• How to access the data of all users of a page?

  Hi all, I'm new to APEX and have a query.
  
  I have installed APEX on my local machine, create a workspace and added a few users to roles.
  
  I'm creating an application, similar to a library application, where I have a table that stores information of books (BOOK_ID, BOOK_NAME, etc.). I would like to create another BOOK_USER table with two columns BOOK_ID and USER_ID. BOOK_ID refers to the BOOKS table and I want to USER_ID to refer to the table that stores the information of the users of the workspace I use. Data entry would be a page that has two LOVs, one for the name of book (using BOOK_ID as value) and another for the user name (USER_ID, or another field APEX uses to store the ID of the user). I can do in APEX? I found ways to access and authenticate a user to a page, but how to get the data of all users in the workspace? In other words, how to get all the usernames in a LOV?
  
  As I am new to APEX, I would appreciate if anyone can guide me through the steps, or posting links to the tutorial, etc.

  I think you can do this by querying APEX_WORKSPACE_GROUP_USERS.

• To access the machines by VPN

  Hi all

  I've established a connection VPN between PIX515 6.3 and a VPN Client 4.6, connection up without problem.

  But now, how can I have access to the machines installed inside the box? (for example, using remote desktop)

  I tried with a vpn address pool (outside) and private (inside) address, but I cannot access these machines.

  Please, I have to do to get access? What about Alberto Brivio

  Hello alberto,.

  The client's IP address of the pool? If Yes, is the IP pool on a different subnet than the segment inside?

  In this case, you must do the following:

  (1) has no nat for traffic from inside the pool of intellectual property.

  NAT (inside) 0 access-list sheep

  access-list allowed sheep ip 192.168.1.1 host 10.1.1.0 255.255.255.0

  where 192.168.1.1 is the server the access of end-users and 10.1.1.0/24 is the IP pool

  (2) If you have a list of inside access, allow access between the LAN and the IP pool.

  Try these and let us know...

  REDA

• Cannot access the folder C:\ drive user

  1. I have Windows 7.

  2. I have a user folder with all my documents in there. Everything about this case insists that it can be found at C:\Users\MyName.

  3. when I try to follow this path, there is no record to MyName. In C:\Users, he not only "invited" and "Public". It defies everything I know on the functioning of the paths of files.

  I need to understand why this is and how to access My Documents by following the path C:\. Any suggestions?

  Thank you.

  Two things to try.

  Sign in to your user account.

  Click Start > your account (top right of the start menu)

  Right-click on your Documents folder, click Properties, and then click on the location tab. See what he says.

  If it says C:\Users\Yourname\Documents then try the following:

  Open Windows Explorer, go to C:\Users.

  In the toolbar, click on organize > folder and Search Options.

  Click the view tab and scroll down the hidden files and folders.

  Click on the box "show the hidden files and folders".

  Click on apply and OK. Then show your user account?

• Permission to access the dynamic views v$ users not sysdb

  Hello

  I am a beginner in Oracle and this is my first post in this forum, so please be gentle

  I am trying to give some capacity on certain points of view a user not sysdba like this:

  What worked well:

  create view V_SYS_SESSION_LONGOPS as (select * from v$ session_longops);

  GRANT SELECT ON V_SYS_SESSION_LONGOPS TO myuser.

  What has not worked:

  create view V_SYS_SQL as (select * from v$ sql);

  GRANT SELECT ON V_$ SQL to myuser.

  GRANT SELECT ON V_SYS_SQL TO myuser.

  The problem is that these SQL commands are accepted by oracle, but my user does not see this second view (while the first works very well).

  I did something in a wrong way?

  Thank you

  What is the error?

  Having the MYUSER account run select * from SYS. V_SYS_SQL

  Hemant K Collette