To access the machines by VPN

Similar Questions

• My password has expired on Windows 7 and I can't access the machine

  I have a Samsung Windows 7 Home Edition laptop. Last night, the password has expired (apparently without warning) and now I can't access the machine. I tried Safe Mode, but it returns the sign on screen. Tried to fix and had the same end result - a return to the login screen. There is only one account on the machine.

  When your password has expired then, you will be immediately prompted to enter a new password. Unless you enter a new password, Windows won't let you continue.

  No, I had not given the possibility to enter a new password. It's a stupid system to have passwords expire on home computers.

  What you say does not correspond with my own observations.

  Restart in Mode safe mode, and then log in as administrator. The password is usually empty. Now, you can reset the password for your existing account.

  When you're done, plan in advance and create, test and document a second admin account.

  To avoid that your passwords expiring, follow these steps:
  1 log in under an administrator account.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET accounts /maxpwage: unlimited

• ASA 5500 - to access the headquarters SSL VPN users

  I have a user who has access to our main office LAN using an SSL VPN. Of course, they can access all of our internal resources.

  Is it possible that, in the main office, I can access their machine?

  If so, should what configuration changes I give?

  Willemin

  Should be able to access their machine if they are connected.

  Just make sure you know their ip address which is attributed to their SSL VPN, and also if they have a personal firewall installed on their computer, it allows access (or off).

• Machine Vista "frequently", but not always, ask user name and password to access the public folders on the XP machine.

  Location:

  4 x Vista computers
  1 x XP computer acting as a server file, all the data in the "shared folders".

  All 4 Vista computers were to access shared data on the XP machine for two years without problem. All of a sudden this week one of the Vista computers "Frequently" but not always ask for a username and password to access the machine XP - not only shared folders, but still a list of shared resources on the machine XP via my network places is the result in the box of "connect to" request credentials to appear. All 3 other Vista machines have no problem to access the XP machine, so the problem must be with the a Vista machine.

  To put a spanner in the works as I have said in this case "Frequently" and by that I mean probably 9 of the 10 connection attempts. Let's say, you can see the name of the computer in my network places, you double click it and have asked for credentials, cancel the attempt and to repeat 4 or 5 times and then you could get display shared resources without going into the details of connection. For a few minutes, you might be able to access all the shared data and to navigate through the folders, but then all of a sudden have asked you credentials and can not access to anything, even the files accessed you seconds before.

  Lets say you are able to access the shared folders, you navigate to the Parent folder, then under A folder, then a subfolder B, go back to A notebook, then try to access folder B even once and you get guest credentials, quit out of the network completely locations, navigate back to the XP via Network Places and this machine you not even be able to display all the shared resources on the XP machine.

  I've also set up a shared folder on a Vista machine with matching username and password on the machines and the Vista machine with the get the problem exactly the same problem so this definatley Vista machine with the question and not sharing files on the XP machine.

  Someone at - he met before or have any suggestions?

  Hi MikeBarnes,

  You can check in the Analyzer for performance and reliability.

  Step 1:

  To start reliability monitor and performance monitor

  a. Click Start, right-click computer and click on manage.

  b. in the Microsoft Management Console navigation tree, click on performance and reliability.

  Step 2:

  You can also try a system restore to a point before the problem started.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Access the token Machine and MachineId of Action Script

  Hello

  Have the Machine in Flash Access 2 token is a great addition.   Now I can elminiate my encrypted store hacks to idientify devices.

  However, is it possible to access the token Machine from a Script of Action?    For our application to allow end users to fully manage their devices, we need for our AIR application to know what Mach token and the long pass to our web services outside access flash.

  Is it possible to access the token Machine of Action Script/AIR so that we can pass this along to our web service?

  Thank you

  R

  Hello

  There is no way to access the Machine Token of Action Script.

  Just a reflection of me: maybe you can pass machine token info in your 'web server' your license server, when authentication of clients or licence application.

  Best regards

  Wang Chao

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Refuse the remote user VPN to access PC using VPN from Site users to partner Site

  Hi Experts,

  Installation program:

  We have configured IPSEC Site - Site VPN between Cisco ASA 5510 and Sonicwall.

  Tunnel is in place and working well, we are able to access the remote workstation to partner and Vis Versa.

  
  

  Requirment: We want to deny remote VPN users, who are our partners access to the workstation.

  Example:

  Remote IP address range: 192.168.200.x/2r4

  Local IP address range: 192.168.10.x/24

  Deny traffic from 192.168.200.x/24 to 192.168.10.x/24

  Thanks in advance

  Kiran Kumar CH

  Hi Kiran,

  You want to deny certain IP addresses of the Remote LAN (of the L2L tunnel), to connect to your workstation?

  Thus, if the remote network 192.168.200.0/24, want to deny some of these machines to connect to 192.168.10.x?

  If this is the case, you can create ACL VPN (VPN filters) on the SAA to restrictive traffic through the tunnel from the IPs.

  Please clarify if I have misunderstood.

  Federico.

• To access the backups Time Machine another computer

  I have spent a good hour looking for a solution to this problem, but have developed empty-handed.

  If I understand correctly, backups of access from another Mac time Machine, I need to connect the backup drive to another Mac and select "Browse Other Time Machine disks... "in the Time Machine dock menu and choose the drive.

  The backup drive appeared as expected and I clicked on "Use selected Disk" to enter the time Machine.

  At this point, the computer between what seems to be Time machine, but shows a Finder window to the hard disk of the computer rather than the backup drive and shows not all dates before "today (now)."

  A thread has suggested that I open a Finder window and select 'Computer' in the menu to reach before the opening of time Machine. It did not work.

  Another thread has suggested that I have use the Migration Wizard rather to recover files and folders, I need. This is not ideal, but I tried it anyway, the result being that the Migration Wizard app remained "Looking for source...". "without finding the backup drive.

  Before formatting my drive on the original Mac, I had checked for if ensure that I could access the Time Machine backup while it was plugged into the backup drive (which he successful well).

  I use the latest version of El Capitan 10.11.6 on a MacBook Air (mid 2011). Backup is a MacBook Pro (mid-2010) who ran as El Capitan.

  I would appreciate any other suggestions!

  So, I discovered the solution, which has been in a simpler way that I expected. Before opening, Time Machine, it is necessary to find the sparsebundle Disk Image in the backup disk in the Finder and open it with "DiskImageMounter." Then, you must select "Computer" in the Finder menu reach before choosing the option "Browse Other Time Machine disks... "menu to the dock of time Machine. The first finder window it shows in the Time Machine view still belongs to the computer, but now it shows the previous backups, who are all from the backup drive!

• To access the template Pages on Time Machine

  Hello

  I'm tying to access my template Pages stored on my time from a laptop Machine. I have access to the time machine but can't seem to find the record that I'm looking.

  On the laptop that I use, I use the "Go to the Finder folder" option and enter "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates. It takes me to the page templates on the laptop that I use.

  I am wanting to use this same command inside the time Machine to Access Pages templates that are placed in memory.

  I tried 'Shift - command - G' and entering "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates", but it just brings back me to the Pages of laptop models, not the machines of the era.

  Your help is appreciated,

  Stophen.

  Use the step to go on record to land inside your local user Pages v5 models folder as you have indicated.

  Then click the Time Machine icon in your Dock. This will open the same folder of your last Time Machine backup location. You can then select a current model to restore or go back in the history of Time Machine and select a model in a previous backup, Time Machine. When you find the model you're looking for, click on restore.

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Want to 700-230: how to access the BIOS on machine with wireless keyboard and no keyboard on the PC port

  Hi all

  I have a HP Envy 700-230 which has a wireless keyboard

  How am I supposed to access the BIOS that the keyboard drivers are not loaded until after the machine and there is no normal keyboard connects on this PC for a wired keyboard

  With this kind of computor how am supposed to access the BIOS

  Obviously to start the reports a keyboard error and suggest I press ESC to access the BIOS that I can't because at startup, there is no current keyboard.

  Thanks for any help on this.

  Jeanette

  While not a definitive answer, but try a wired USB keyboard instead wireless.  There may be a setting in the BIOS to change the way the keyboard interacts at the start but, of course, you need to enter the BIOS.  Looking at the other comments on this issue, if you happen to have a keyboard PS/2 and a PS/2 to USB adapter, then this seems to be a better choice.  Plug the PS/2 on the PS/2 keyboard to USB adapter and then try that at startup to access the BIOS.  Then, find the setting to allow the keyboard to be recognized at startup.  Another solution is to move the USB port, the wireless keyboard use.  If the rear ports, move forward, if forward move backward.

  Let me know if one of these help.

• To access the symbols parolees disable FPGA of host machine

  Hello

  Is there a way to programmatically access the conditional FPGA disable the host machine symbols? I would like to have a host VI who could know if, for example, the bitfile FPGA has been compiled with ENABLE_AO or not.

  solarsd wrote:

  Thanks for the tip. I was about to resort to something like that, but I thought that it would be uneconomic in terms of FPGA resources, I didn't know that it was minimal. Furthermore, you happen to know more in detail how something as in the pobrepablo1 example (btw, thanks for the illustration) would be completed in the material? What is the cost of a Panel control before FPGA? I was getting the impression that this is important - in one case, I could only include the VI my FPGA by changing some controls in the constants.

  You can get an idea of the use of the resources of statistical resources on the use of FPGAS screws. For example, I chose an FPGA random ones listed, and the table indicates that a Boolean or indicator control uses 3 flip-flops and 3 lookup tables, which is almost nothing. A constant uses resources from 0 (no logic). If your conditional constant disable can have more than 2 values, an 8-bit value is not much more expensive. If you have more than 256 possible values for a conditional disable, you're probably something wrong of course, I would not recommend using a string as in the example of pobrepablo, because it would be very expensive. That's as much detail as I can provide.

  solarsd wrote:

  I find such behavior of weird symbol be honest. I realize that these symbols are gone after compiling, but everything is managed in a LabView project, if the symbols must be available throughout. I think changing the symbol value will trigger a recompilation of bitfile FPGA anyway, so the 'source' and the binary files are synchronized. The FPGA "bitfile", as I see it, must have a code of host interacting with the driver card hardware FPGA, i.e. where the State of these symbols must be exposed to the user in my opinion. Just trying to understand the logic behind this.

  You can configure LabVIEW to open a bitfile on FPGA directly, without the VI used to compile. In this situation the VI and bitfile are not synchronized, and the bitfile could have been gathered in a different project with a completely different set of symbols parolees disable. The only way to guarantee that the bitfile is compiled with the right settings is an indicator on the front panel. You can take a look at the bitfile, it is just XML, and it doesn't even include the version of LabVIEW, used for the compilation. You can use a bitfile to a version with one crowd on the other, as long as the bitfile format has not changed. Disable conditional symbols are removed before the VI (in the intermediate form) is given in the Xilinx tools that actually create the bitfile. NEITHER could add more information, such as the value of the disable conditional, to the bitfile XML symbols, but there should be enough demand for them to do and they would then also need to add a mechanism to access this information. I could be wrong, but I don't know that enough people would find useful to a value of this change, when it is so easy to add an element of façade. Still, you could post on the Exchange of ideas FPGA and see if there is interest.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  original title: alternate tcp/ip

  If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

  The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

  Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

  If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• Vista can ping machine to another, but cannot access shared folders on the machine

  Hi experts,

  Recently, we have problems with some Vista machines to access shared folders on other Vista machines. This seems to happen after the automatic updates of windows.

  These 'problem' machines are able to ping other machines 'good' but is unable to connect to shared folders machines 'good '.

  The reverse works fine ('good' machines can ping and access 'problem' machines).

  When you connect to folders shared of these 'problem' to 'good' machines machines using \\machinename\folder or even \\machine_ip\folder, the error window "the network location cannot be reached" appears.

  'Problem' machines can do desktop connection remote for the machines 'good '.

  All machines have the parameters: -.

  Same workgroup

  Same domain - private network

  Network discovery on

  File sharing on

  Public folder sharing

  Password protected sharing

  I am not able to find a solution on the web site and microsoft.

  Re-install Vista on 1 machine of 'problem' and the problem goes away.

  The problem with reinstalling is subject to re-registration of certain software licenses which has no registration online (through applications for certificates).
  Is there a resolution without having to re - install Vista?

  ltkhoo

  Hey

  You can post your question here:

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro