ASA (8.03) context single mode can support the limits on resources?

Similar Questions

• my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

  my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

  my windows 7 pro 64-bit

  someone had this case? and help

  Thank you

  Check the character Panel. Is "all caps" (TT) on?

  

• By project costing can support the PM feature

  Dear Dina,
  
  In the absence of project management license can cost of project can support the same functionality?
  
  Please advice...

  Hello

  Project costing cannot have the functionality of budgeting.
  All the other features for project management are not supported without implementing PJT.

  Dina

• What type of CPU can support the FMLE3 to encode to h264 format

  The Signal is yuv or pcm data stream, I use the fmle3.0 for encoding in h.264 format.

  Once started.the CPU price of public services will go up to 100%.

  I want to know, what kind of CPU can support the live stream.

  In other words, my requirement is encoding a live stream that the price of public services of cpu is less than 30%.

  Here are the system requirements:

  http://www.Adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/

  Other people may have real experience to share...

  Jody

• T410 w / integrated graphics can support the RES Dell U2711 of 2560 x 1440 using the displayport?

  I wanted to buy the Dell U2711 that uses a resolution of 2560 x 1440.  I have a Lenovo T410 that uses the integrated Intel Graphics Media accelerator card.  I have a few questions:

  (1) can I use the monitor resolution 2560 x 1440 with this configuration of the laptop (connection via Displayport to Displayport adapter), if not, what is the maximum resolution I can use?

  (2) If Yes, can I use the Dell U2711 monitor plug and play or do I need to install drivers to use the maximum resolution (the T410 is a company computer and I can't install the drivers)?

  Also, while I'm asking, I have a T500 with a host of Ati. HD 3650 video card.  Can I connect to the monitor dell via adapter Displayport to Displayport to achieve this resolution?

  (1) Yes it can.

  (2) no driver, plug-and-play. Even if windows would give you a few drivers for monitor calibration, etc..

  (3) Yes, you can (all thinkpads with displayport can support this resolution, which is one of the reasons why Lenovo choose this over HDMI in their mobile phones of the company).

• BlackBerry passport can support the home from a keyboard shortcut button?

  Hello

  I wish I had a BB10 device with a button at home that I really have problems using the House with my index finger gesture, so I thought of the passport which has a nice screen size (not large enough classic for me). I saw this as a request for improvements on the Passport, but I thought I would check with Passport users to ensure that you could not currently do this (if you can I just came out a purchase it as a replacement for my Z30.) So is it possible to assign a key or keys to bring me to the structure of home/active?

  Thank you

  John C.

  I do not want to get personal, and I can understand the problem might be that. But for what it's worth, I slide upward and to the right with my thumb all the time. I did with Z10 and do it now with Passport. My hands are average, I believe, not real big and not small.

  As much as the question and I assume you mean the screen of the application, it is not shortcut I know or can find happening on the screen of the application of any screen.

• WF single owner can modify the ownership of record?

  How can I write a workflow as well as the owner of a record can change the owner?

  Yes, by using flow of work and you could rewrite your state of being the opposite of what you have now, and then set the 'Actions if Condition is False' to cancel save and view your message. But in this case, any change that makes the user is also not saved. The user would lose all changes if they navigate away from the record, without setting the owner and try to save again.

  Good luck
  Thom

• ASA 5505 in router Mode can implement the MAC ACL

  Hi all:

  My client request can the Cisco ASA 5505 implement MAC ACL in Cisco ASA 5505, who is now running in router Mode.

  Can anyone help answer this?

  I tried to search the document and also tried the ASDM in the Cisco ASA 5505 but couldn't see a way to do the ACL by MAC address.

  At the same time can also help me find the command line using the ASA 5505 able to run MAC ACL in router mode?

  Thank you very much!

  Warm greetings,

  TangSuan Tan

  MAC ACL is not supported in Routed mode, only in Transparent mode.

  Here is the command for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/A1.html#wp1598101

  And here is the ethertype supported:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/access_rules.html#wp1083699

• ASR 9001 built in ports can support the Twinax cables?

  Hello

  Can of ASR9001 built in ports support 10Gig using Twinax connection cables:

  SFP-H10GB-CU3M, 5 M, 7 M and 10 M?

  Thank you!

  -Mazzy

  We support only the active cable not the cables (passive) CU ACU.

  Support came in 5.1.1

  Thank you

  Sam

• First 13 elements can support the video format Sony XAVC s?

  Hello

  Impossible to find 13 sheet first if the video format Sony s XAVC is supported.  Appreicate the experts.

  Thank you

  There are several project presets and output multiple render presets for XAVC S.

• HP DV4-1431-US can support the Core2Duo T9900?

  Hi all

  need to know if

  (1) CPU Intel Core 2 Duo T9900

  And

  (2) 2 x 4 GB = 8 GB of RAM DDR2 - 800 Mhz

  Will be compatible with my old DV4-1431-US?

  This game called "Gang Beasts" and laptop computer behaves weak.

  And so I thought I'd go for an upgrade of the processor.

  In addition, what is the disk hard max, could extend, given the dimensions of the tray SATA 2?

  Yes the max memory is 8 GB of DDR2 - 800 SO - DIMM

  Here is the Manual:

  Repair manuals

  This is the manual for the dv4t-1000. There is no manual specific to your exact model, so it's probably the same manual. It lists the T6400 processor and T6600 and yours has a T6500. It lists the processor the faster is the T9600. I would say that there is a good chance that the T9900 will work but I don't know that the T9600 will work. The T9600 is just a bit slower.

  The T9600 is a little less expensive as more frequent:

  http://www.eBay.com/ITM/new-Intel-Core-2-Duo-processor-T9600-6M-cache-2-80GHz-1066MHZ-FSB-SLG9F-SLB47-/161334537865?PT=CPUs&hash=item259049ae89

  With respect to hard drives, if you're looking for performance you should get at least a hybrid drive. It would work fine:

  http://www.Newegg.com/product/product.aspx?item=N82E16822178340

  It's a hybrid of 1 TB with a 64 meg cache and a 8 GB flash drive included. Almost as fast as an SSD, and about a third of the price $/ concert.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Laptop dv6-7210us 15.6-inch HP Envy it can support a ST1000LM014

  Hello, Christmas, I received a dv6-7210us of my parents for College. I noticed that the disc is continueously fill and is it need a cleaning. This laptop can support the 6.0gbps or if I should get a slower?

  Hello

  Yes, it supports the 6.0gbps but he is running at this speed or not is another story. You can check yourself by using the following program:

  http://www.CPUID.com/softwares/PC-Wizard.html

  It will display something similar to the following image in the title of the disk controller:

  

  Kind regards.

• HP pro 3125 supports the 600 Watt power supply

  HP Pro 3125 can supports the power of 600 watts?

  Can HP pro 3125 PCIe supports ddr5 graphics cards?

  You would be better served by joiningthe HP Business Enterprise forum and post the question here.

  The pc that you ask the subject is a business model.

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• I need to change the OS between my 2 computers (Windows XP and 7) where I can download the necessary files?

  I have a laptop with a valid license of Windows 7 and a desktop computer with a valid XP license. I think I would get more use from 7, if it was on my desk and would be willing to downgrade my laptop to XP (it runs very slowly regardless). However because I bought the laptop with Windows 7 installed I have a Windows 7 disc. Where can I download or order a new copy of the disc?

  UPDATE: The license I have is for Windows 7 Home Professional.

  UPDATE: The license I have is for Windows 7 Home Professional.

  There is no such thing as 'Friendly' - it is Home Premium or Professional.

  As others have said - if your copy of WIndows came pre-installed, then they are OEM editions which cannot be transferred to another computer in all circumstances.

  You can buy a license to upgrade to WIndows 7 for use on your desktop - but I suggest that you run upgrade first Advisor to ensure that the material can support the operating system properly.

  Insofar as your laptop is slow, it's usually because of too much loading at startup, or malware.

  Do you have an anti-virus installed up-to-date? When was the last time you ran a full system scan?

  You have all the other anti-malware installed apps?

  Check what programs are loaded at startup - and which are loaded as Add - ons for Internet Explorer. Use the options in the program to stop everything you must actually run at startup (you can test temproarily using MSCONFIG, but use the options of the program for more permanent effects.)