HP pro 3125 supports the 600 Watt power supply

Similar Questions

• HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

  In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

  I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

  What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

  Any additional details and details on this power to help me determine the next video card would be useful.

  On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

  Thank you

  JCOOPER2

  Hello

  Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

  When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

  I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

  Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

• HP Pro 6000 Elite 8000: Does Hp 6000 Pro and Elite 8000 Supports 600 Watt Power Supply connector having 6 pin

  I want to upgrade my suuply standard power of 300 watts to 600 watts in my two HP 6000 minitour pro and Elite 8000 Tower systems. Is the Board supports power supplies good as brand take heat?

  I would not classify a Thermaltake PSU as a very good brand.

  Unfortunately, your desktop PC uses an exclusive style of PSU, so standard ATX PSU will not work.

  Upgrading the owners 300 Watt PSU 600W ATX POWER supply is not just going to work.

  Your desktop PC is one that is not very conducive to the upgrade.

• Reference Dell 8700 and 460 Watt power supply: card of the highest Performance NVIDIA supported by Dell?

  What is the highest performance NVIDIA supported by Dell video card that you can put in a Dell 8700 using the stock 460 watt power supply? I put in a Geforce GT 640 in my 8700 for now but later want to upgrade without messing around with the upgrade of the power supply.

  Thank you.

  Hello

  'Officially', with the stock power supply, the GTX960 is the highest card, you can keep on XPS8700, 400W is enough for this card (will get mine installed tomorrow... MSI GTX960 games 4 GB).

  BUT, some people installed the GTX970, as well as a few model required PSU 500W min.

  It is the hope to allow you to take the "risk" or not.

  Remember to update your BIOS, first.

  And good read on the post, here on "XPS8700 and Nvidia GTX... »

• Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

  Of course, you can!

  Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

  Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

  Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

  Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

  It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

  Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

  Kind regards
  ERICO
  Published by erico on 15/11/2009 13:17

  Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

• the dell 1100 watt power supply is compatible with the 9100 studio?

  I need this answered because IM stupid. Ty much

  Hi michaelwilson,

  Dell Studio XPS 9100 chassis is minitower, you can customize the system with any normal ATX power on the market. Please get back to us with the details of 1100 watt power supply or a link so that I can check and confirm you.

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• Take in charge of the common Nighthawk of the X 8 power supply 240V (USA model)?

  Take in charge of the common Nighthawk of the X 8 power supply 240V (USA model)?

  It should work perfectly.

  We have a job in a remote desktop using 240V.

• How to control the TTi QL564P Power Supply with USB connection?

  Hello

  When I connect the TTi QL564P power supply via the USB port I see not on MAX (peripherals and interfaces) the virtual serial connection. With GPIB, everything works great!

  I already downloaded the latest drivers on the site of the IFG.

  And I created a simple VI like this:

  OPEN--> VISA VISA WRITE ('V1?") --> DELAY (0.1 s)--> READING of VISA--> VISA CLOSE

  (works via GPIB, does not work via USB)

  VISA OPEN I have the name of resource VISA only the LPT1 and COM1 ports available... so where is the USB port (this virtual serial port, case)?

  VISA GPIB resource name is the ALIAS that I set on MAX...

  Thanks for the help

  OK, the solution was... on the front panel of the power supply, I replace the USB bus (I had default GPIB )

• The upgrade and the amount of power supply is recommended

  Hello, well if the subject says everything I want to toally upgrade my computer I thought to upgrade my CPU and RAM, motherboard also the graphics card and possibly the Pan too.

  Here is what I am planning get.

  Black edition AMD FX-8150 FX 8 strands

  Use the versatile ASUS Power Supply calculator power.

• How to apply the patch to power supply in an environment of dataguard

  I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

  Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

  In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

  To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

  1 reporter on the primary to the standby log shipping.

  2 cancel the MRP on the standby database.

  3. apply the patch of power supply on the standby server. -See the Readme for instructions.

  4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

  5. do not run any script correction on the standby database.

  6. apply the patch of power supply on the principal server.

  7. make sure that your primary database and the listener on the primary server is running.

  8 turn on the primary to the standby log shipping.

  9 start the MRP on the standby database.

  10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

  Please refer to this

  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

  Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

  HTH

  -Jonathan Rolland

• The P300 280 watt power supply upgrade

  Is there a power on the mobo 14pin connector. Makes a 600 watts or more power supply with this connector?

  Thank you

  FWIW, the FRU 54Y8899 is in stock and currently $114 plus transportation and tax by IBM.

  Visit the following link, plug the FRU number and add it to your basket.

  http://www-304.IBM.com/shop/Americas/webapp/WCS/stores/servlet/default/PromotionDisplay?promoName=PA...

• Aurora r5 stock heatsync voltage problems with evga modular 750 watt power supply

  The stock fan on the heat sink thermal condition of the R5 Aurora stock runs just as fast as it can while holding a 6700 k, you mind, at a steady temperature around 30 C idle. Previous the cpu and psu were almost silent, whereas now the fan seems to run to rpm max powered an EVGA 750 watt p2 modular power unit cpu1 slot. How can I reach the bios to lower the fan speed?

  Yet, I am not "awake" not until the Caffè Verona + mix roast French kick. I do not have the model of your computer, but your service PDF manual available for download on the R5 Dell.com support page lists the Bios options, lists the right place to connect the fan to & lists the keyboard button to push to enter the Menu of the Bios. At a time like this, I could put back the original power supply in there, confirm the fan installs, if so, replace the new power supply in, see if again deploys spazzes

  but I don't think it's the power supply

  If your bios menu has no control of the fan speed, a swap of psu se do not spin faster or slower radiator fan. If you have ordered the 6700 k to the Fund, you would have power 850w. If you have installed the 6700 k yourself, using pneumatic radiator, it is possible the 95 watt cpu needs best, as the cooling liquid cooling. I see you're at 30 c idle, but it seems that the fan is bad fan... header check than 1st, see options in photo here: Alienware Aurora R5 - fan CPU 100%

  • Edit: @Hockeytown messaged me: "I eventually replaced the H80i Corsair GT for a 550LC Asetek ebay OEM pump. "This has solved my problem of fan and I am now able to connect via the (Top_fan + Pump_fan) factory setting and not errors.
  • @Hotarri installed Corsair H60

  It is possible, the motherboard as expected 'react' different when deleting in the 6700 k; It is possible that since 6700 k factory liquid cooled, the spazzes motherboard when the owner puts 6700 k themselves but without cooling liquid, such as a small problem, uses one table different fan / or a set of parameters of the fan speed (6700 k + pneumatic radiator = incompatibility) that hopefully you can change in the Bios somehow somewhere but maybe not

  It is possible that you can hand-place 3rd fan header 'pump', trying to fool the mother board, lol, see if the cpu fan slows down as a test. Still, I do not have this model, I think that the motherboard that waits for a signal fan/tachometer on the header of the pump in response to 6700 k, good luck with it

  post a photo of your swap 750 for us when you get it figured out (=

• Pavilion 6540y: the upgrading of power supply and graphics card

  I need to update my graphics card. What is the best inexpensive card graphics and power supply to buy for my HP Pavilion 6540 Y. I use it mainly for work and graphic design. Currently, the stock video card doesn't have enough memory to effectively run Photoshop and painter with three monitors. Photoshop's request at least 512 M of memory for what I do, but I'd like to at least 1 GB. Sometimes I will have Photoshop and painter running at the same time.

  Hello

  I love the Corsair CX500 or the 520w Seasonic because they adapt to the physical dimensions for your PC.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• Where the Manager of power supply for Thinkpad E440 8.1 on windows

  Hello, is there any manager of power for thinkpad E440 8.1 on windows, I have already installed the driver for power management since the lenovo support site, but I think I need to install the power manager. is it good?

  If so, are there no power manager for thinkpad E440 8.1 so far on windows?

  so, how can I manage the threshold for the load?

  Good day and welcome to the community.

  ThinkVantage Power Manager has not been supported since Win7. It is reported in the community members apparently makes it work, but it is not sanctioned. There are also discussions on loading of the thresholds through registry changes. Please be careful if you choose to pursue it.

  Kind regards.