ASA a journal messages in denies CSM to ASA

Hello world

Given that I added an ASA to csm 4.3 our server syslog always see the message from the message

: Connection refused in x.x.x.x/56432 inside the y.y.y.y/https.or user «»

where x is csm server ip

is there fw interface ip.

And after this message after a few seconds, I see that the MSC has succeeded in journal for cisco ASA.

Need to know why I get this message with usernam white

Concerning

Mahesjh

Post edited by: Manu Peyre

Maybe one of your credentials (configuration manager, right-click on firewall in question and choose the device properties, references and check the two login and activate credentials) is incorrect.

Tags: Cisco Security

Similar Questions

Need help on a journal message.

Hello

I found a few routers with the same message and I have found no info about it on google and cisco.com.

The router is a version of IOS from Cisco 871 c870-advipservicesk9 - mz.124 - 15.T1.bin

The customer's dsl connection was up and down for a few days and I found a weird journal in the log message, so I rebooted the router and now I can not ping the router, he's dead! :(

The journal are:

28 sep 09:39:10.285 EDT: policymap_inform_features_to_an_interface: could not get runtime_action.

Can someone help me on this, I will really appreciate!

Thank you!

Guillaume

This error message is related to some matches of the policies that are configured in the router, but this message is no way related to the router does not not after a reboot. The possible cause of a router does not not after a reboot is a corrupted flash image. You will need to access console of the router to check if the flash image is corrupt.

Writing in the journal Message Board"

Is it possible to write in the Panel of the log messages from a transformation script?

Try this:
```
Packages.oracle.dbtools.crest.swingui.ApplicationView.log("your text");
```
Philippe

We have the alignment of the text for the journal messages & indicators of progress of cant

Hi all...
I use Cp4.
I want to align the text to the right and down. Is this possible in Cp4. is there any solution for this?
Elodie

Hi Elise,.

Yes, but this has no effect at all, which is really confusing. The area in her repeat the Message will stay always aligned; I think it's because of the way the review is presented for the wrong answers, where a (large) table will be inserted and it would be difficult to achieve with the text aligned left or centered correctly. In CP5 that this possibility (unemployed) isn't there anymore, that is why I forgot it. In CP5.5 review has totally changed, symbols are now used to correct/incorrect feedback.

Lilybiri

ASA 8.4 (3) - applying NAT breaks my tunnel from site to site - "Routing failed.

So I'm a few 5510 preconfiguration is before shipment to the site. I have my tunnel VPN from Site to Site and can ping of internal subnets between the sites. However, as soon as I configure NAT on my interface my pings die outside. I checked a guide very full config posted by TAC and I think the answer is to set up two times-NAT, which I believe I did. I don't always get no package in the tunnel.

A hint, I found, is that I get the journaled message when NAT is applied & affecting routing "ASA-6-110003: routing could not locate the next hop for ICMP from Outside:10.56.8.4/512 to Internal:172.16.60.253/0.

Output sh run object / run object-group sh / sh run nat / show the two ASA nat: -.

SITE 1

= sh run object
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the BH-Asterisk object
host x.x.x.x
BG Hill Asterisk description
network of the BH-Exchange object
host x.x.x.x
BG Hill Exchange Server description
the DH - AV object network
10.56.20.0 subnet 255.255.255.0
Description AV DH
the DH-Asterisk object network
host x.x.x.x
DH Asterisk description
the object-Diffie-Hellman exchange network
Home 10.56.1.253
Description Exchange Diffie-Hellman
the DH-guests object network
10.56.8.0 subnet 255.255.255.0
DH customers description
the object DH ME network
10.56.24.0 subnet 255.255.255.0
DH ME description
the DH-phones object network
10.56.16.0 subnet 255.255.255.0
Description phones DH
network of the DH-security object
10.56.32.0 subnet 255.255.255.0
Description safety DH
DH-internal object network
10.56.1.0 subnet 255.255.255.0
Description internal DH
network object internally-BH
10.60.1.0 subnet 255.255.255.0
Description internal BH
network of the BH-phones object
10.60.16.0 subnet 255.255.255.0
Description BH phones
network of the BH-security object
10.60.32.0 subnet 255.255.255.0
BH Security description
network of the BH - AV object
10.60.20.0 subnet 255.255.255.0
Description AV BH
network of the BH-guests object
10.60.8.0 subnet 255.255.255.0
BH invited description
network of the BH - ASA object
host 1.1.1.1
the DH - ASA object network
host 1.1.1.2
network of the BH-RAS object
10.60.99.0 subnet 255.255.255.0
the DH-RAS object network
10.56.99.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.56.99.0_26 object
255.255.255.192 subnet 10.56.99.0
network of the BH-UC560 object
Home 172.16.60.253
network of the DH-UC560 object
Home 172.16.56.253

= RJ5510-DOHA # sh run object-group
the BGHill object-group network
Description of subnets in BGHill
BH-internal network-object
network-object BH-phones
network-object BH - AV
network-object BH-security
network-object BH-guests
network-object BH-RAS
BH-UC560 network-object
object-group network DH
Description of subnets in DH
network-object DH - AV
network-object DH-guests
network-object DH ME
network-object DH-phones
network-object DH-security
DH-internal network-object
network-object DH-RAS
network object-DH-UC560

= RJ5510-DH # sh run nat
NAT (AV, outdoors) static source DH DH static destination BGHill BGHill
NAT (comments, outdoors) static source DH DH static destination BGHill BGHill
NAT (inside, outside) static source DH DH static destination BGHill BGHill
NAT (phones, outdoors) static source DH DH static destination BGHill BGHill
NAT (safety, outdoors) static source DH DH static destination BGHill BGHill
NAT (ME out) static source DH DH static destination BGHill BGHill
!
the DH - AV object network
dynamic NAT interface (AV, outdoors)
the object-Diffie-Hellman exchange network
x.x.x.x static NAT (indoor, outdoor)
the DH-guests object network
dynamic NAT interface (comments, outdoors)
the object DH ME network
dynamic NAT interface (ME, outdoor)
the DH-phones object network
dynamic NAT interface (phones, outdoors)
network of the DH-security object
dynamic NAT interface (safety, outdoors)
DH-internal object network
dynamic NAT interface (indoor, outdoor)

= HD-RJ5510 # see nat
Manual NAT policies (Section 1)
1 (f) (outdoor) static source DH DH destination static BGHill BGHill
translate_hits = 0, untranslate_hits = 386
2 (guest) (outdoor) static source DH DH destination static BGHill BGHill
translate_hits = 180, untranslate_hits = 0
3 (inside) (outside) static source DH DH destination static BGHill BGHill
translate_hits = 0, untranslate_hits = 0
4 (phones) (outdoor) static source DH DH destination static BGHill BGHill
translate_hits = 0, untranslate_hits = 0
5 (security) (outdoor) static source DH DH destination static BGHill BGHill
translate_hits = 0, untranslate_hits = 0
6 (ME) (outdoor) static source DH DH destination static BGHill BGHill
translate_hits = 0, untranslate_hits = 0

Auto NAT policies (Section 2)
1 (outdoor) source static-Exchange Diffie-Hellman x.x.x.x (internal)
translate_hits = 0, untranslate_hits = 0
2 (internal) interface of DH-internal dynamics of the source (outdoor)
translate_hits = 0, untranslate_hits = 0
3 (comments) interface (outside) dynamic source DH-guests
translate_hits = 2, untranslate_hits = 0
4 (phones) to the dynamic interface of DH-phones of the source (outside)
translate_hits = 0, untranslate_hits = 0
5 (AV) to dynamic source DH - AV interface (outside)
translate_hits = 0, untranslate_hits = 0
6 (I) dynamic source DH-ME interface (outside)
translate_hits = 0, untranslate_hits = 0
7 (security) to DH-security dynamic interface of the source (outside)
translate_hits = 0, untranslate_hits = 0

SITE 2: -.

= object # executed sh
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the BH-Asterisk object
host x.x.x.x
BH Hill Asterisk description
network of the BH-Exchange object
Home 10.60.1.253
BH Hill Exchange Server description
the DH - AV object network
10.56.20.0 subnet 255.255.255.0
Description AV DH
the DH-Asterisk object network
host x.x.x.x
DH Asterisk description
the object-Diffie-Hellman exchange network
host x.x.x.x
Description Exchange Diffie-Hellman
the DH-guests object network
10.56.8.0 subnet 255.255.255.0
DH customers description
the object DH ME network
10.56.24.0 subnet 255.255.255.0
DH ME description
the DH-phones object network
10.56.16.0 subnet 255.255.255.0
Description phones DH
network of the DH-security object
10.56.32.0 subnet 255.255.255.0
Description safety DH
DH-internal object network
10.56.1.0 subnet 255.255.255.0
Description internal DH
network object internally-BH
10.60.1.0 subnet 255.255.255.0
Description internal BH
network of the BH-phones object
10.60.16.0 subnet 255.255.255.0
Description BH phones
network of the BH-security object
10.60.32.0 subnet 255.255.255.0
BH Security description
network of the BH - AV object
10.60.20.0 subnet 255.255.255.0
Description AV BH
network of the BH-guests object
10.60.8.0 subnet 255.255.255.0
BH invited description
network of the BH - ASA object
host 1.1.1.1
the DH - ASA object network
host 1.1.1.2
network of the NETWORK_OBJ_10.60.99.0_26 object
255.255.255.192 subnet 10.60.99.0
network of the BH-RAS object
10.60.99.0 subnet 255.255.255.0
the DH-RAS object network
10.56.99.0 subnet 255.255.255.0
network of the BH-UC560 object
Home 172.16.60.253
network of the DH-UC560 object
Home 172.16.56.253

= # sh run object-group
the BHHill object-group network
Description of subnets in BH Hill
BH-internal network-object
network-object BH-phones
network-object BH - AV
network-object BH-security
network-object BH-guests
network-object BH-RAS
BH-UC560 network-object
object-group network DH
Description of subnets in DH
network-object DH - AV
network-object DH-guests
network-object DH ME
network-object DH-phones
network-object DH-security
DH-internal network-object
network-object DH-RAS
network object-DH-UC560

= # sh run nat
NAT (inside, outside) static source BHHill BHHill static destination DH DH
NAT (AV, outdoors) static source BHHill BHHill static destination DH DH
NAT (comments, outdoors) static source BHHill BHHill static destination DH DH
NAT (phones, outdoors) static source BHHill BHHill static destination DH DH
NAT (safety, outdoors) static source BHHill BHHill static destination DH DH
!
network of the BH-Exchange object
x.x.x.x static NAT (indoor, outdoor)
network object internally-BH
dynamic NAT interface (indoor, outdoor)
network of the BH-phones object
dynamic NAT interface (phones, outdoors)
network of the BH-security object
dynamic NAT interface (safety, outdoors)
network of the BH - AV object
dynamic NAT interface (AV, outdoors)
network of the BH-guests object
dynamic NAT interface (comments, outdoors)

= # sh nat
Manual NAT policies (Section 1)
1 (inside) (outside) static source BHHill BHHill static destination DH DH
translate_hits = 421, untranslate_hits = 178
2 (AV) to (outside) static source BHHill BHHill static destination DH DH
translate_hits = 0, untranslate_hits = 0
3 (guest) (outdoor) static source BHHill BHHill static destination DH DH
translate_hits = 0, untranslate_hits = 0
4 (phones) (outdoor) static source BHHill BHHill static destination DH DH
translate_hits = 0, untranslate_hits = 0
5 (security) (outdoor) static source BHHill BHHill static destination DH DH
translate_hits = 0, untranslate_hits = 0

Auto NAT policies (Section 2)
1 (outdoor) static source BH-Exchange x.x.x.x (internal)
translate_hits = 0, untranslate_hits = 0
2 (internal) interface of BH-internal dynamics of the source (outdoor)
translate_hits = 0, untranslate_hits = 0
3 (comments) interface (outside) dynamic source BH-guests
translate_hits = 0, untranslate_hits = 0
4 (phones) to the dynamic interface of BH-phones of the source (outside)
translate_hits = 0, untranslate_hits = 0
5 (AV) to dynamic source BH - AV interface (outside)
translate_hits = 0, untranslate_hits = 0
6 (security) at the interface of BH-security dynamic of the source (outdoor)
translate_hits = 0, untranslate_hits = 0
RJ5510-BH #.

I admit that I am scoobied with this one, but I hope that someone will find the capture?

Thank you

In fact, the problem is with the NAT because because you use the same object on different States of NAT attached to different interfaces.

The SAA can go crazy with it...

I must leave now.

As soon as I get back I'll explain this a little further.

Kind regards

Julio

Note all useful posts

Received the phone call from Tech Dept of Win.Op.Sys.Suport told me my computer was sending messages of error and called my CLSID? is it a hoax?

Call Tech Dept of Win.Op.Sys.Suport has been saying

my computer was sending Of Error Messages

Dennis Clarke cited my CLSID

How did get my phone number?

How did get CLSID from my computer?

Is this a hoax OR an attempt to get (more) into my computer?

Think this will answer your questions - it's a scam similar to that discussed in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/just-had-a-call-regarding-ammyy-admin-is-it/ead4bc40-75a3-4383-b539-7d01a83f32ae

Kind regards...

Last log message was: < 140735120521568 > < GPUManager > < 2 > Sniffer result Code: 3

Today, I stupidly tried to install Accelerator CUDA forget I have graphics for Intel/AMD combo card and NVidia not. Now, when I try to launch AE or PremierePro I get this last journal message has been: < 140735120521568 > < GPUManager > < 2 > Sniffer result Code: 3. I trashed the CUDA program and reinstalled first and AE but no joy. Same message followed by another box of error with options to try, send to Apple or to ignore. I tried all 3 options but nothing works! Every time I run a program same message.

Go to Library/Frameworks and remove CUDA. Framework.

Weird random stop code - 128

Recently I started having some problems with my Macbook Pro 15 mid-2014 retina. While the work screen goes black and the computer shuts down. When booting all previously open windows reopen without showing unexpected shutdown > send the error to Apple.

I used the Diagnostics of Apple to test the device and no error was shown.

I have re-installed at El Capitan and the same problem happened.

Here's a quick journal message. Could you please inform me what message to post here? Thank you

14/05/16 com.apple.xpc.launchd [1 8:34:01.813 PM]: (com.apple.FileSyncAgent.PHD.isRunning) HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

14/05/16 com.apple.xpc.launchd [1 8:34:01.823 PM]: (com.apple.speech.speechsynthesisd) this key does nothing: upon request

14/05/16 com.apple.xpc.launchd [1 8:34:01.826 PM]: (com.apple.trustd.agent) this key does nothing: upon request

14/05/16 com.apple.xpc.launchd [1 8:34:01.826 PM]: (com.apple.trustd.agent) ServiceIPC the key is no longer respected. Please delete.

14/05/16 com.apple.xpc.launchd [1 8:34:01.826 PM]: (com.apple.TrustEvaluationAgent) this key does nothing: upon request

14/05/16 com.apple.SecurityServer [77 8:34:01.872 PM]: commissioning

14/05/16 8:34:01.000 PM kernel [0]: Airport: link down on en0. Reason 8 (dissociated because leaving the station).

14/05/16 8:34:01.000 PM kernel [0]: duration Got incomplete channel of a sequence 0, must be 16

14/05/16 8:34:01.000 PM kernel [0]: duration Got incomplete channel of a sequence 0, must be 16

14/05/16 8:34:01.000 PM kernel [0]: en0: channel changed to 1

14/05/16 8:34:01.000 PM kernel [0]: changed en0::IO80211Interface:postMessage bssid

14/05/16 8:34:01.000 PM kernel [0]: bpfAttach len 94 dlt 163

14/05/16 8:34:01.000 PM kernel [0]: bpfAttach len 30 dlt 105

14/05/16 8:34:01.000 PM kernel [0]: bpfAttach len 52 127 dlt

14/05/16 8:34:01.000 PM kernel [0]: bpfAttach len 38 dlt 192

14/05/16 8:34:01.894 PM configd [50]: dhcp_arp_router: en0 unavailable SSID

14/05/16 8:34:01.902 PM configd [50]: definition of hostname to "Naregs-MacBook - Pro.local.

14/05/16 8:34:01.903 PM configd [50]: preference: no sharing preferences

14/05/16 8:34:01.905 PM configd [50]: network modified

14/05/16 8:34:01.000 PM kernel [0]: IOGraphics flags 0 x 43

14/05/16 8:34:01.000 PM kernel [0]: AppleCamIn::init

14/05/16 8:34:01.000 PM kernel [0]: AppleCamIn::probe

14/05/16 8:34:01.000 PM kernel [0]: AppleCamIn::start

14/05/16 8:34:01.000 PM kernel [0]: virtual bool AppleCamIn::start(IOService *): about to configure DDR

14/05/16 8:34:01.000 PM kernel [0]: AppleCamIn::start - S2 frequency of 450 MHz (default) DDR game

14/05/16 8:34:01.951 PM UserEventAgent [41]: captive: CNPluginHandler en0: inactive

14/05/16 8:34:01.953 PM UserEventAgent [41]: unable to copy the info to /System/Library/UserEventPlugins/alfUIplugin.plugin bundle dictionary

14/05/16 8:34:01.000 PM kernel [0]: * [IOBluetoothHostControllerUSBTransport] [start] - completed - results = TRUE - 6800 x 0 *.

14/05/16 8:34:01.000 PM kernel [0]: * [BroadcomBluetoothHostControllerUSBTransport] in [start] - completed (matched on device) - 6800 x 0 *.

14/05/16 8:34:01.000 PM kernel [0]: [IOBluetoothFamily] [staticBluetoothTransportShowsUp] - received the Bluetooth controller register service notification - 0 x 6800

14/05/16 8:34:01.000 PM kernel [0]: [IOBluetoothFamily] in [start] - completed

14/05/16 8:34:01.000 PM kernel [0]: [IOBluetoothHostController] in [start] - completed

14/05/16 8:34:01.981 PM secinitd [143]: UID [0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist

14/05/16 8:34:01.981 PM secinitd [143]: ctkd [141]: unable to get the path root for executable main beam: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd

14/05/16 8:34:01.000 PM kernel [0]: [IOBluetoothHostController::setConfigState] calling registerService

14/05/16 8:34:01.000 PM kernel [0]: * [IOBluetoothFamily] [ProcessBluetoothTransportShowsUpActionWL] - call to registerService () - 0xcc70 - 0-x 9000 IOBluetoothFamily - 0 x 6800 * ƒ

14/05/16 8:34:01.000 PM kernel [0]: * [IOBluetoothFamily] [ProcessBluetoothTransportShowsUpActionWL] - related transport successfully - 0xcc70 - 0-x 9000 - 0 x 6800 *.

14/05/16 8:34:02.008 PM systemkeychain [134]: file: /var/run/systemkeychaincheck.done

14/05/16 8:34:02.036 PM apsd [73]: CGSLookupServerRootPort: failed to get the port to "com.apple.windowserver.active" (1102)

14/05/16 8:34:02.000 PM kernel [0]: in6_unlink_ifa: address 0x7ad9ea0264ed0bf IPv6 has no prefix

14/05/16 com.apple.xpc.launchd [1 8:34:02.066 PM]: (com.apple.CoreRAID [46]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.CoreRAID

14/05/16 8:34:02.000 PM kernel [0]: cause of previous stop:-128

His are all stop causes:

14/05/16 7:32:45.000 PM kernel [0]: cause of previous stop:-128

14/05/16 8:34:02.000 PM kernel [0]: cause of previous stop:-128

14/05/16 8:50:50.000 PM kernel [0]: cause of previous stop:-128

Contact photos are compressed/low quality

I love my bike 360. But sometimes, when I get a message from den contact photo that appears as the background sounds, well, terrible. Ive tried to change the contact's photo on my phone at a better resolution photo, but it always looks bad. Its a nice watch and it's a shame the photos seem so compressed. I know that its possible to get beautiful surfaces of contact because of the demo seen in videos. In addition, Album art seems good too. Someone knows how to optimize photos contact on my phone so that they look good on the watch? Thank you.

I've contacted the developers Android wear and got a little more information.

It turns out that it is a problem with the application Google Hangouts is hard-coded. For those that care here is the answer I received from Wayne Piekarski:

"The app Hangouts was previously using setLargeIcon since it is what the Notification API provided previously. Now that they have updated so that it uses setBackground() to Android, and a future update will push this. »

Thus, it seems that we just have to wait and Hangouts team will take care of that with an update. Maybe it's something to talk to other developers if you notice the same error.

How to set up the SRI 4000-4331 to enable logging of rsyslog facilitated by using the console admin GigabitEthernet0 port

Does not work? Pleas advise

Run the following on the SRI 4331.

ntmhomes #configurer t
Enter configuration commands, one per line. End with CNTL/Z.
ntmhomes (config) #service timestamps log datetime localtime
ntmhomes (config) #.
ntmhomes (config) #.
ntmhomes (config) #logging host 192.168.20.5
#logging ntmhomes (config) trap inform
ntmhomes (config) #logging trap information
FAC #logging ntmhomes (config)
ntmhomes (config) #logging facility local7
ntmhomes (config) #end
ntmhomes #.

ntmhomes (config) #logging facility local7
ntmhomes (config) #end

ntmhomes #show logging
Syslog logging: activated (0 messages fell, 11 messages limited rate, 0 flashes of heat, 0 overruns, xml disabled, filtering of persons with reduced mobility)

No discriminator Message Active.

No discriminator inactive Message.

Recording console: level of debugging, 50 messages, xml, disabled,.
filtering of persons with reduced mobility
Monitor logging: debug, 0 messages level, xml, disabled,.
filtering of persons with reduced mobility
Logging buffer: level of debugging, 64 recorded messages, xml, disabled,
filtering of persons with reduced mobility
Exception logging: size (4096 bytes)
County and logging messages timestamp: disabled
Persistent logging: disabled

No active filter module.

Logging trap: information level, 66 lines of journaled message
Connection to 192.168.20.5 (514, auditing disabled, udp port
(link to top),
5 lines of message logged,
0 message rate lines limited.
0 message lines a dropped-by-MD,.
Sequence number of XML disabled, disabled
filtering of persons with reduced mobility
Interface-logging Source: VRF name:

Log buffer (4096 bytes):
g to host 192.168.20.5 port 0 CLI request Triggered
* 9 January 17:45:27: % SYS-5-CONFIG_I: configured from the system memory
* 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, disabled interfaces
* 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
* 9 January 17:45:27: % SPA_OIR-6-OFFLINECARD: SPA (ISR4331-3x1GE) offline in subslot 0/0
-More-

I think you need to tell the system that you are using the management interface

Try

host 192.168.20.5 record vrf Mgmt-intf

See the link below the section on management tasks common gigabit ethernet

http://www.Cisco.com/c/en/us/TD/docs/routers/access/4400/software/config...

Incoming TCP faddr traffic

Ciscso Forum Question:

After reviewing alerts SNORT on a Win2KServer, I found a faddr TCP traffic.

Log Message % PIX-6-302001: Built number of incoming TCP connection for faddr gaddr laddr x.x.x.x/80 adr_ip/port x.x.x.x3537

Journal message% PIX-6-302002: connection TCP disassembly for x.x.x.x/3537 adr_ip/port x.x.x.x/80 duration time laddr gaddr faddr byte num (text)

The same faddr was denied to all other laddr, except this one. Why is it spend?

Well SE firewall prevents traffic from addresses abroad to break into the network if you have configured NAT or not. We usually use NAT to hide inside addresses, and also to support a multitude of users against a handful of public IP addresses.

Sometimes it is necessary to leave the traffic to bypass the normal rules of the firewall to allow external users to access protected resources, for example a Web server in the DMZ. The usual design is to put these resources that require outside access to a different interface to servers and internal users. This third interface is usually referred to as the DMZ. You can have multiple DMZ according to your requirement.

When you configure a static and then a corresponding conduct in leaving the traffic for this machine, you're essentially saying the firewall to allow connections initiated from outside of this machine and corresponding to the driving. When this happens, the PIX it will report in the newspapers and that's exactly what you see. For machines either have no static type or even if they are not static but no ductwork is allowing anything to them, these machines connections will be rejected.

Hope that makes things clear.

Pitfalls of Logging IOS - default configuration?

Log configured by default on IOS 12.1 and above traps? If so, the default debug value? for example, if you don't see 'logging trap' in the config file - this does not mean logging is NOT enabled. Opening session, logging traps are by default configs - logging in buffered memory is not. Answer please if you can confirm this - thank you!

Hello

Logging settings can vary with the version of IOS. I can tell you, "logging console debugging" is enabled by default in most of the IOS versions. 'consignment of information trap' and "no logging not stamped" may be the default with most of the versions.

Rather than trying to look for documentation see what that default value to recovery with different versions parameter record, well, we recommend that you use the command 'Show log' to check the status of the different types of logging and it will look something like this.

Journal of #show R1

Syslog logging: activated (0 messages fell, 1 messages limited rate, 0 flashes,

0 overruns, disabled xml)

Recording console: level 34 messages saved, debugging, xml disabled

Monitor logging: level 0 messages saved, debugging, xml disabled

Logging buffer: disabled disabled xml

Logging size Exception (4096 bytes)

County and logging messages timestamp: disabled

Logging trap: informational level, 38 lines of journaled message

All of the above settings are by default in this router running IOS version 12.2.

HTH

Sundar

Cannot reach the destination of an IPSec tunnel through another IPSec tunnel

Hi all

I have a PIX 515E version 8.0 (2).

I have two remote sites connected to this PIX via IPSec tunnels.

Each remote site can reach local networks behind the PIX, but I can't reach remoteSiteB remoteSiteA.

Thus,.

SiteA <----- ipsec="" -----="">PIX1 SiteX <---------------->10.0.8.1 10.30.8.254

SiteB <----- ipsec="" -----="">PIX1 SiteX <---------------->10.0.8.1 10.138.34.21

SiteA can ping SiteX

SiteB can ping SiteX

SiteA cannot ping SiteB

SiteB cannot ping SiteA

If I do not show crypto isakmp ipsec his I see appropriate subnets:

Tag crypto map: CRYPTO-MAP, seq num: 4, local addr: 203.166.1.1

permit access-list ACLVPN-TO_SITEA ip 10.138.34.16 255.255.255.240 host 10.30.8.254

local ident (addr, mask, prot, port): (10.138.34.16/255.255.255.240/0/0)

Remote ident (addr, mask, prot, port): (10.30.8.254/255.255.255.255/0/0)

current_peer: 104.86.2.4

Tag crypto map: CRYPTO-MAP, seq num: 5, local addr: 203.166.1.1

access-list ACLVPN-TO_SITEB allowed host ip 10.30.8.254 10.138.34.16 255.255.255.240

local ident (addr, mask, prot, port): (10.30.8.254/255.255.255.255/0/0)

Remote ident (addr, mask, prot, port): (10.138.34.16/255.255.255.240/0/0)

current_peer: 216.178.200.200

Journal messages that seem to point to the problem...

April 18, 2013 13:27:35: % PIX-4-402116: IPSEC: received a package of ESP (SPI = 0xD51BB13A, sequence number = 0x21A) 104.86.2.4 (user = 104.86.2.4) at 203.166.1.1. Inside the package décapsulés does not match policy negotiated in the SA. The package indicates its destination as 10.138.34.21, its source as 10.30.8.254 and its Protocol 6. SA specifies its local proxy like 10.0.8.0/255.255.255.0/0/0 and his remote_proxy as 10.30.8.254/255.255.255.255/0/0

My question is really what I have to do something funky to allow traffic to pass between the two tunnels?

Hello

This could be much easier if we have seen the real configurations.

But here are some things to be confirmed in the configurations (some of them you mentioned above, but I still quote once again)
- Make sure that each firewall, you set the appropriate VPN L2L ACL
- Make sure that you have configured NAT0 on the central PIX "outside" interface for the Site A and Site B
- Make sure the Central PIX has "same-security-traffic permit intra-interface" configured. This will allow the Site traffic to enter the Central PIX 'outside' interface and head back on the same interface to Site B. And vice versa.
To view some actual configurations that may be required provided everything else is ok. (I assume that all devices are Cisco)

Central PIX

permit same-security-traffic intra-interface

A connection to the site

SITE-A-CRYPTOMAP of the 10.0.8.0 ip access list allow 255.255.255.0 host 10.30.8.254

SITE-A-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 host 10.30.8.254

Site B connection

SITE-B-CRYPTOMAP of the 10.0.8.0 ip access list allow 255.255.255.0 10.138.34.16 255.255.255.240

SITE-B-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.138.34.16 255.255.255.240

NAT0

access list for the INTERIOR-NAT0 allowed ip 10.0.8.0 255.255.255.0 host 10.30.8.254

access list for the INTERIOR-NAT0 allowed ip 10.0.8.0 255.255.255.0 10.138.34.16 255.255.255.240

NAT (inside) 0-list of access to the INTERIOR-NAT0

OUTSIDE-NAT0 allowed host ip 10.30.8.254 access list 10.138.34.16 255.255.255.240

OUTSIDE-NAT0 allowed ip 10.138.34.16 access list 255.255.255.240 host 10.30.8.254

NAT (outside) 0-list of access OUTSIDE-NAT0

Site has

CENTRAL-SITE-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.0.8.0 255.255.255.0

CENTRAL-SITE-CRYPTOMAP to the list of allowed access host ip 10.30.8.254 10.138.34.16 255.255.255.240

the INTERIOR-NAT0 allowed host ip 10.30.8.254 access list 10.0.8.0 255.255.255.0

the INTERIOR-NAT0 allowed host ip 10.30.8.254 access list 10.138.34.16 255.255.255.240

NAT (inside) 0-list of access to the INTERIOR-NAT0

Site B

CENTRAL-SITE-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 10.0.8.0 255.255.255.0

CENTRAL-SITE-CRYPTOMAP of the 10.138.34.16 ip access list allow 255.255.255.240 host 10.30.8.254

the INTERIOR-NAT0 allowed host ip 10.138.34.16 access list 255.255.255.240 10.0.8.0 255.255.255.0

the INTERIOR-NAT0 allowed host ip 10.138.34.16 access list 255.255.255.240 host 10.30.8.254

NAT (inside) 0-list of access to the INTERIOR-NAT0

Hope this helps

-Jouni

Cisco 2611XM syslog errors

Hello, I have these types of errors on a 2611XM router. Anyone got a clue?

tell xak #sh connect

Syslog logging: activated (0 messages dropped, rate limited, 2 messages

vacuum of 0, 0 overruns, xml disabled, filtering of persons with reduced mobility)

Recording console: level of debugging, 4812 messages, xml, disabled,.

filtering of persons with reduced mobility

Monitor logging: debug, 8 messages level, xml, disabled,.

filtering of persons with reduced mobility

Logging buffer: level of debugging, 4812 messages, xml, disabled,.

filtering of persons with reduced mobility

Logging size Exception (4096 bytes)

County and logging messages timestamp: disabled

Logging trap: notifications, lines of 1051 message logged level

192.168.10.2, lines of 1051 journaled message, xml disabled, logging

filtering of persons with reduced mobility

Log buffer (100000 bytes):

2y1w: rsa_create_handler: Invalid AVL (0x5ED3F88, 0x5ED3F90, 0x5ED3F98, 0x5ED3FA0, 0x5ED3FA8, 0x5ED3FB0, 0x5ED3FB8, 0x0)

2y1w: IPSECcard: an error return 0x007F

. June 7 03:32:11: % 3-SSH-KEYPAIR: attempt to generate keys of server failed - error code: hardware error

-Process = "SSH event handler", PW = 0, pid = 3

-Traceback = 8085F7C8 8156F154 C 8059, 338 8059F75C

. June 7 03:32:11: % SSH-5-persons with DISABILITIES: SSH 2.0 has been disabled

. 7 Jun 04:20:37: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart to 10.0.0.11

. June 7 05:58:29: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty1 (192.168.0.108)

. June 7 06:00:19: % SSH-5-ACTIVATED: SSH 2.0 has been activated

. June 7 06:00:21: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty1 (192.168.0.108)

. 7 June 06:03:07: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty1 (192.168.0.108)

. 7 June 09:03:52: % CLEAR-5-COUNTERS: claire counter on interface Serial0/0 by lgcomsupport on vty1 (192.168.0.184)

. June 7 09:09:31: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty0 (192.168.0.108)

. 7 June 09:10:24: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty0 (192.168.0.108)

. June 7 09:13:04: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty0 (192.168.0.108)

. 7 June 09:15:02: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty0 (192.168.0.108)

. 7 June 09:28:23: % SYS-5-CONFIG_I: configured from console by lgcomsupport on vty0 (192.168.0.108)

2y1w: rsa_create_handler: Invalid AVL (0x5ED2D08, 0x5ED2D10, 0x5ED2D18, 0x5ED2D20, 0x5ED2D28, 0x0, 0x5ED2D38, 0x5ED2D40)

2y1w: IPSECcard: an error return 0x007F

. 7 Jun 20:00:26: % 3-SSH-KEYPAIR: attempt to generate keys of server failed - error code: hardware error

-Process = "SSH event handler", PW = 0, pid = 3

-Traceback = 8085F7C8 8156F154 C 8059, 338 8059F75C

. 7 Jun 20:00:26: % SSH-5-persons with DISABILITIES: SSH 2.0 has been disabled

. 8 Jun 02:20:38: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart to 10.0.0.11

tell xak #sh worm

Cisco IOS software, software C2600 (C2600-ADVSECURITYK9-M), Version 12.3 (11) T, VERSION of the SOFTWARE (fc2)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by Cisco Systems, Inc.

Update sam 18-sept.-04 11:38 by eaarmas

ROM: System Bootstrap, Version 12.2 (7r) [next 7r], RELEASE SOFTWARE (fc1)

tell xak uptime is 2 years, 1 week, 5 days, 3 hours, 14 minutes

System to regain the power ROM

System restarted at 12:32:45 IS Wednesday, may 27, 2009

System image file is "flash: c2600-advsecurityk9 - mz.123 - 11.T.bin.

Cisco 2611XM (MPC860P) processor (revision 0 x 100) with 94450K / 3854K bytes of memory.

Card processor ID JAE071800DF (3191415314)

M860 processor: Ref. 5, mask 2

2 FastEthernet interfaces

2 serial interfaces

1 module of virtual private network (VPN)

32K bytes of NVRAM memory.

32768 K bytes of processor onboard flash system (read/write)

Configuration register is 0 x 2102

Hello

You probably have a hardware problem with your VPN module.

Kind regards.

Alain.

Lost access to local data store

Hi people:
I have ESXi 6.0 running on an Intel S2600CWTS motherboard using the LSI SAS controller onboard and six readers Samsung 850 Pro SSD in a RAID 5 configuration. This server is about a month and a half, and it worked fine for the first month, but in the last few weeks I started to do in the case where journal messages saying that ESXi has lost access to the data store, then, most of the time, about 15 seconds later access is restored. Several times it took more time, which one crashed the server. On these long, the motherboard Intel event log showed that a player had failed and began a regeneration and once the motherboard has shown that two different drives had failed, and it took both offline originally ESXi crashing. On it that I was able to bring the two records back online via the RAID bios and everything worked fine again. I suspect that I have hard disk problems because these discs are new and because different readers have been reported as failed, and also because no data has been lost even if 2 drives went offline at the same time. I guess I could have a bad controller LSI, or a cable has come loose somewhere, but I expect to happen if it is really the case of data loss.
I also noticed that lost access messages tend to appear in the log at the moment I start a virtual machine. At first I thought that it would be one thing to flow, thinking a VM departure did a lot of IO, but this happens immediately, before even the bios of the virtual screen machine disappears, so I don't think that the virtual machine is actually reading the disc again. In addition, as a precaution, I started the migration of some virtual machines on the server to the old server I still had available, and there is no lost access messages in the event log while that was happening, while about 50 megabytes per second of i/o has reached the disk during transfers. I put the last patch on ESXi in mid-May, about two weeks before this started, and I begin to suspect that the patch may have something to do with it, because it seems to me that if something is happening between ESXi and the disk controller making hang up or lose interruptions during a short period of time , and I wonder if it goes pretty long if material in the motherboard sensors interpret this as some sort of hardware and simply brand failure according to readers I / O was hooked as bad then.
Unfortunately I'm out of town now so I wanted more I had to the remote server, lest I do not not get back to the top. I moved a couple of the most critical virtual machines from the old server which I was remotely start and transfer to virtual machines. I also noticed that this issue tended to occur more frequently when I got to the top of the VCenter Server apparatus that any other (sometimes to others, but has happened every time I tried to start the device VCenter). So who was the first that I moved to the old server, but strangely enough there is no error logged when I transferred the files, so the issue is not that ESXi had trouble reading the VMs vmdk file when I started it.
I also wanted to ask you if there are any vibs for the LSI Megaraid controller on motherboard S2600CWTS I could install that would allow me to access the RAID controller without having to pick up the server and do it from the BIOS configuration screens, similar to how you can access the controller RAID from Dell while ESXi is running via a vib add-on. So far I have not found one.
My intention when I go to the server is to run an integrity check against the RAID 5 array via the controller and then use the AIMÉ ESXi utility on the data store to see if something is wrong here. If not, then I guess I'll rewritten can patch.
Ideas or suggestions welcome.

Success! I finally understood what the problem was corrected. The problem is the fact that although the last vib driver LSI has been installed, for some reason any it would not automatically replace the default ESXi pilot lsi_mr3. I did not notice that even though the latest driver package vib properly installed LSI controller was still using the original driver. This could be considered by a 'esxcfg-scsidev - a' command showed that even "vmhba1 lsi_mr3 link-n/a sas.5001e67ca647e000 (0000:0: 00.0) controller LSI MegaRAID SAS Fury." The second field after the controller (vmhba1) is the current manager used. The pilot, which was to be used was: "vmhba1 megaraid_sas link-n/a unknown.vmhba (0000:03:00.0) Avago (LSI / Symbios Logic) Invader MegaRAID SAS controller.

To fix this I had to disable the lsi_mr3 driver so that ESXi is forced to use it. The procedure to do is the following:

(1) make sure you have the new EXSi driver you want to use already installed. I assume that bad things would happen if you have disabled the only driver who could run your disk controller. Use this command to view the drivers installed: "esxcli software vib list" and you should get something similar to the following:

[root@intelserver:~] esxcli list of software of vib

Name Version Date seller installation acceptance level

----------------------------- ------------------------------------ ------ ---------------- ------------

MegaRAID SCSI-sas 6.608.11.00 - 1OEM.600.0.0.2494585 Avago VMwareCertified 2015-07-19

LSI - mr3 6.606.10.00 - 1OEM.550.0.0.1391871 LSI VMwareCertified 2015-06-19

mtip32xx-native 3.8.5 - 1vmw.600.0.0.2494585 VMWARE VMwareCertified 2015-04-28

ATA-pata-amd 0.3.10 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-atiixp 0.4.6 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-cmd64x 0.2.5 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-hpt3x2n 0.3.4 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-pdc2027x 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-serverworks 0.4.3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-sil680 0.4.8 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

ATA-pata-via 0.3.3 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

block-cciss 3.6.14 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

CPU-microcode 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

EHCI-ehci-hcd 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

elxnet 10.2.309.6v - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

Emulex-10.2.309.6v - 0.0.2494585 VMwareCertified-2015-04-28 VMware esx-elxnetcli

ESX-based 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

ESX-dvfilter-credits-fastpath 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

ESX-tboot 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

6.0.0 - 0.0.2494585 of xserver-ESX VMware VMwareCertified 2015 - 04 - 28

IMA-qla4xxx 2.02.18 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

IPMI-ipmi-devintf 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

IPMI-ipmi-paremeter 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

IPMI-ipmi-TR-drv 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LPFC 10.2.309.8 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LSI-msgpt3 06.255.12.00 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LSU-hp-hpsa-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LSU-lsi-lsi-mr3-plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

LSU-lsi-lsi-msgpt3-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LSU lsi megaraid sas plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

LSU-lsi-mpt2sas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

LSU-lsi-mptsas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

Misc-cnic-register 1.78.75.v60.7 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

Misc-pilots 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

NET-bnx2 2.2.4f.v60.10 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-bnx2x 1.78.80.v60.12 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-cnic 1.78.76.v60.13 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-e1000 8.0.3.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-e1000e 2.5.4 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-enic 2.1.2.38 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-forcedeth 0, 61 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-igb 5.0.5.1.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

NET-IGB 3.7.13.7.14iov - 20vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-mlx4-core 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-mlx4-en 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-nx-nic 5.0.621 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-tg3 3.131d.v60.4 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

NET-vmxnet3 1.1.3.0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

nmlx4-core 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

nmlx4-en 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

nmlx4-rdma 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

nVMe 1.0e.0.35 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

OHCI-usb-ohci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

qlnativefc 2.0.12.0 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

REST 2.0.2.0088 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

Ahci SATA 3, 0 - 21vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

ATA-SATA-piix 2: 12 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

NV-sata-SATA 3, 5 - 4vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

SATA-sata-promise 2: 12 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SATA-sata-sil24 1, 1 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SATA-sata-sil 2, 3 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SATA-sata-svw 2, 3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-aacraid 1.1.5.1 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-adp94xx 1.0.8.12 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-3, 1 - aic79xx 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-bnx2fc 1.78.78.v60.8 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-bnx2i 2.78.76.v60.8 - 1vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

SCSI-DNI 1.5.0.45 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-hpsa 6.0.0.44 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-ips 7.12.05 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-megaraid-mbox 2.20.5.1 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-megaraid2 2.00.4 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-mpt2sas 19.00.00.00 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-mptsas 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-mptspi 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

SCSI-qla4xxx 5.01.03.2 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

UHCI-usb-uhci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

VMware-esx-dvfilter-maclearn-1, 00 1.00 VMware VMwareCertified 2015-05-12

xHCI-xhci 1, 0 - 2vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

Tools-light 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

[root@intelserver:~

Verify that the scsi-megaraid-sas driver is installed before proceeding.

(2) to disable the lsi_mr3 driver do the following: "esxcli set of module system - enabled = false - module = lsi_mr3 '

(3) reboot

After restarting, do: "esxcfg-scsidev - a" to check megaraid_sas driver is assigned to your disk controller.

I don't know how ESXi decided to prioritize if two or more drivers are applicable to a single hardware device, or if the installation of the new driver LSI process is supposed to disable or remove default lsi_mr3 driver and simply failed to do so. Also, I don't know what's going to happen when I put on the next patch of ESXi, specially if the lsi_mr3 driver will be once more the priority. If anyone knows how the driver installation process is supposed to work in this situation, please let me know. I am so happy that I finally got this problem because the server has been seriously covered with the data store become unaccessable for 5 to 10 seconds every time a VM started or stopped, and the former driver at least once done something bad enough to deceive the controller into thinking that one of the disks has went wrong and began a RAID Resync.

ASA a journal messages in denies CSM to ASA

Similar Questions

Maybe you are looking for