ASA and AnyConnect - automatically select the best server

Similar Questions

• NB500-108 does not automatically select the boot device

  Hello

  When I start the computer (NB500-108), it gets as far as the "Toshiba Leading Innovation" screen and stops. It will allow me to select F2 and F12, but I have to do it EVERY time I start the computer. It seems that it will automatically select the HDD/SSD drive and I can't find in the start menu anyway to fix this problem.

  I tried running repair of the boot from the Windows 7 repair disc and even if it is said that there is no problem, I would consider it a problem.

  Any help would be greatly appreciated.

  Thank you

  I have same NB520 and I ve never done in this situation.
  Try it please to the value of the default BIOS and check if the problem persists.

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• by automatically selecting the folder of origin for registration

  When I open a PDF from a folder and make changes, I want to CD to automatically select the location/folder of original file for recording. How do I do that? the earlier version of the drive used for this.

  Hi andrewf91748828,

  I understand your concern, but it is by default in a particular location, you will need to manually, navigate to the location you want to save the file.

  He also recalled frequently saved areas which can be directly selected to save the file.

  Kind regards

  Nicos

• When I select a layer, I want it to automatically select the content

  I create a new layer empty, then add 1 big brush with very soft edges (making it difficult to see where it ends up actually).  When I select the layer, I want it to automatically select the stroke of brush to resize or move or other.  How can I do this?  Sorry if I don't him have not properly explained.

  With the selected layer, Ctrl + T (PC) command + T (Mac), then you can enter an anchor hold SHIFT and drag... ?

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Virtual Server Center down and as its also the license server, it cannot start

  I have the virtual center server which is also the license as a virtual machine server. We had problems with the SAN today and decided to move this server to local storage in the case of other issues during the weekend, until we can diagnose/solve the problems of SAN. However, it will not start back up to stop the virtual machine to move (no installation storage vmotion again) and complains that cannot see the license server, the license server's so how can we start it?

  I tested stop this server before and to work around the problem, then we have just activated evaluation mode, the server restarted, and he returned to the license server mode when it was high, but he used to do that now and I can not start any vm at all and since most of them failed because of problems with SAN storage I need to get this resolved as soon as possible. The difference between when we tested before and now 4 months and update 3 has been applied recently.

  How do I start the server in its current or is configuration - it is no longer possible to use the evaluation mode and we do the licensing of other words, IE non-virtual?

  ......

  I managed to start the server using VM Player running in another physical server, but this is not an ideal long-term solution, but out me an affair until we solve this problem.

  Many people run in this mode.

  As a backup, just getting up an another license server using your existing key.  Point the ESX host with virtual machine on it to the 'temp' license server by connecting to the host ESX directly with the VI Client.

  Back up the virtual machine.

  Change license server address that you modified on the back of ESX host.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• Cisco ASA and AnyConnect VPN certificate error

  Hello

  I am trying to configure Cisco AnyConnect VPN and everything works, but I get this warning message when the connection is opened:

  Error.jpg

  

  I don't have public certificate in ASA. Is it possible to use the self-signed certificate and get rid of this warning message?

  Hello

  This is expected behavior on the SAA for an SSL connection. You can certainly use the certificate self-signed on the SAA and then apply it on the external interface.
  Once done, you will need to install this certificate on the clients and this will alleviate the popup error message.

  Here is a document that you can refer to create a self-signed certificate.
  https://supportforums.Cisco.com/document/44116/ASA-self-signed-certificate-WebVPN

  Kind regards
  Dinesh Moudgil

  PS Please note the useful messages.

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• Select the remote server to download files.

  With the help of CS5.5 I am unable to put files on my test server, except if the remote server is selected. He said: "before using this feature, you must set up a remote server. You want to book one now? ".

  If I check the remote server, I am able to upload files to the test server, also download the remote server that is BAD, I'm just testing and redesigning the site.

  I found another thread saying to remove the site, I did; Nothing helps.

  If I do not select a remote server I'm unable to download and to remodel the site.

  How do you have on this?

  Managed to fix it I made my server under servers model > advanced > server model has been configured for PHP MySQL.

• Is there a way to get the Audio to load and play automatically when the user turns the page?

  I am creating a musical application and I would like a sample of the audio play when the user opens a page. I use Indesign CC and building an app for iOS. I didn't know the function that allows me to do this? If anyone knows the answer, I would be very grateful.

  Thank you

  If you use DPS you can add the audio file in the Panel inlays Folio select Audio/video and enable automatic playback.

  See our help section at http://helpx.adobe.com/digital-publishing-suite/help/audio-video-overlays.html for more information.

  Neil

• How to generate a sound (tone) without clicking noise and how to select the left or right speaker

  Hi all

  I try to write write a VI that generates a pure sound of specific frequency and volume, and then sends this tone to a speaker or other (left or right) to be used to teach students about Audiology (hearing these tests may have taken where you hear a noise in one ear or the other).  I created a rather primitive VI to accomplish this, but I am plagued with a number of questions:

  (1) certain frequencies, but not all, the VI produces a rattling at the start and stop of the tone (I think this is related to repeat the configuration and the appeal of the material, but I do not know how to configure it in advance and avoid it - and why he created the clicking sound at all frequencies?).

  (2) at certain frequencies (14000 Hz and more), I do not hear the tone at all on my computer speakers (I still hear the click before and after, but I do not hear the tone.) I know what you might think, but no, this isn't a hearing loss from me :-)

  (3) I would like to be able to direct the tone selectively to the left or right speaker, but at the moment my VI only allows me to choose the 'number of channels' (who I presume "2ch" means left and right), but I don't know how selectively choose only one channel or another.

  Thank you for your helpful suggestions you can offer,

  Eric

  I put together a quick test and dirty without a ramp up and down (good thing for a State MC) as well as the name is not correct but my children are waiting... time for weekend

  I set the buffer to a quarter second, but however the "GUI" is not very sensitive...

• How to save install them all the updates that Windows Update downloads and installs automatically (when the automatic update is enabled).

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  Updates automatically downloaded cannot be reused. Suggest you open the link "View update history" of the icon of the Windows Update control panel and write updates have been downloaded and installed.
  Then download and save them from the Microsoft Download Center .
  Just enter the number in the field to Search All Download Center and then click on the "magnifying glass" to start the search.
  You can also change the language and geographic location by clicking on the link edit in the top right of the page.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• Close the startpoint and endpoint without selecting the first

  Hi guys,.

  I'm working on an image of polygon which means I have created hundreds and hundreds of small triangles with the path tool.

  Now, I have wondered if it is possible to create two lines of the triangle in hand and close the last third line of triangles in shortcut.

  There may be a shortcut (or almost) to connect the beginning and the end of a path? I know I can do it by clicking on cmd + J, but I first select the points which is more work than simply connecting them to the hand. It would be perfect if there's any way to close it without selecting it first, so that I can do an 'action' out of it with a shortcut!

  Any ideas?

  Pathfinder unite.