NB500-108 does not automatically select the boot device

Similar Questions

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• MS Money 2005 - I rebooted the software, but it does not automatically download the update needed to read my existing data files

  Due to a hard drive crash, I had to reformat my hard drive,
  therefore lost my copy previous update of MS Money.
  I reloaded the software from the CD, but it does not automatically download the update needed to read my existing data files.
  Can someone help me read my old data files?

  Microsoft or anyone have made available as a patch to download?

  Hi Derek,.

  Since the problem is related to Microsoft Money, I suggest you post your question on the Forums of money from Microsoft.

  Microsoft Money Forum

• Select the boot device appears to casual throw & computer freeze certain functions

  HP Compaq Pavilion 64 bit, windows 7 Home premium

  6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

  Computer functions started random freezing of microsoft works, don't access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

  Commissioning shows a blue square in the middle of the screen with:

  Select the boot device

  ST 1000 DM003-1 ER162

  HP DVD - Ram GH40L

  F4 amorçage using default

  What boot device use.

  Unplugged the hard drive and turned on pc and hp dvd - ram gh40l was only peripheral boot

  Replaced the motherboard battery already.

  I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

  One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

  Hello @zoboomafoo,

  Thank you for all the information!

  What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don't have full support of drivers.  I hope this helps.

  Kind regards!

• My HDMI cable does not appear in the reading devices or Device Manager. I need to fix this problem

  My HDMI cable does not appear in the reading devices or the Device Manager even if it is plugged, the problem is I want to play sounds through my TV that is connected using the HDMI interface. He appeared once in the playback devices and I allowed and played on a YouTube video and it slowed down the video and the sound was stuttering.  Does anyone know how to fix this? If you do then I would like to thank you in advance.

  Hello

  I suggest you try the steps from the following link and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-cant-get-HDMI-audio-the-HDMI-device-does/a494af37-9780-4b4a-895C-b2c1fce17fe6

  I hope this helps. Let us know if you have other problems with Windows in the future.

• When you try to export data into a program that we use, it does not automatically recognize the file as .xml format. Anyone know what I can do to fix this?

  I tried to uninstall version 3.6 and reinstall. Also, I provided in the workstation image, but it still does not work. The OS is Windows 7 32 bit. This process runs automatically on a XP workstation. In fact, the machine that I've reconfigured was a XP box, but it did not work on this particular machine. Therefore, the reason for the new image.

  See:

  • http://KB.mozillazine.org/File_types_and_download_actions

• Pavilion G6 does not connect to the cellular device

  I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

  Hey RC800,.

  Thanks for the info.

  I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

  If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

  Please, try the following:

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test another iPhone connection:
  Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

  Let me know if this helps.

• Satellite C660-108 does not start if the USB Bluetooth dongle connected

  Hiya,

  I hope you could help me.

  I'm having a problem with my dongle bluetooth and satellite c660-108.
  It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

  But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

  I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  I have to turn it off, remove the bluetooth dongle and then turn it back on.
  And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

  It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
  I'm running under win 8.1 but he already had with 8 victory.

  Anyone any ideas?

  > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  Especially the blinking cursor is displayed because the laptop can not find a boot device.

  It seems that the device cannot put on the HARD drive while the USB dongle is connected.
  I would recommend you check the boot order in the BIOS.

  Put the HARD drive in the first place and the USB boot last device.
  Save changes and check if it helps.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• 6361 versatile usb data acquisition does not automatically detect the SCXI chassis/accessories

  versatile usb data acquisition 6361 will detect automatically SCXI chassis and accessories?

  Hello kdCMC,

  As far as I know that the SCXI-1600 USB Module is able to auto-detect SCXI Modules.
  This is also mentioned on page 11 and 12 of the following SCXI to start document:
  http://www.NI.com/PDF/manuals/373236m.PDF

  All data (including USB-variants such as the NI USB-6361) have only a 68 pin shielded cable (IO) between the DAQ hardware and the SCXI chassis.
  This cable does not auto-detect opportunities since it basically just "transfers analog and digital signals" between SCXI chassis and DAQ hardware.

  Is there a specific document that created the confusion on this subject?

• The off button does not automatically stop the deskjet printer - 6500g.

  When I press the off button, a "shutting down" message is displayed and the button flashes.  This left for 24 hours and the machine does not stop automatically.  It makes a ticking sound like an old wind up clock.  And, with every print request, I get an error message.  Therefore, it does not print and I can't turn it off to reset.  I tried the Tools button, asking him to restore original default, and it does not help.  How can I get this printer to work?

  Hello

  Listed below are the steps that must solve the problem...

  STEP< a="">

  • While the printer turned on, unplug the power cord from the back of the printer.
  • Wait 30 seconds and then plug it in.
  • If the problem persists, follow the steps mentioned in STEP b. >

  STEP

  Click on the link below to access the troubleshooting steps...

  Printer feeds not Off

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• TMS Provisioning, does not automatically synchronize the AD user

  Hi all

  I have a problem with a repertoire of Provisioning TMS which are synchronized with the directory of the AD.

  If I manually start sync, that works very well.

  I see in the Info that will be the next time you start 04:00, but it is not synchronized with the ad automatically, only works manually.

  Does anyone have an idea where I can find the log that records this synchronization.

  I also know that this time is not editable, it is perhaps possible in the NMR netx 13.2 with extension 2.0 Provisioning?

  Thanks for any input

  Best regards

  Georg

  Hi Georg

  Try this:

  USE TMSNG

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] WE

  INSERT INTO [dbo]. [SchedulerEvent] ([Id], [EventServiceName], [EventServiceDLL], [PrimaryServerId], [start], [CancelTime], [ExpireTime], [status], [SchedulerRuntimeStatus_Id], [priority], [progress], [EventDescription], [Settings], [EventLog], [ReoccurenceRule], [RestartTime], [AllowGUIDelete], [ExternalEventId], [RejectList], [Owner_aclUser_Id], [SendSuccessEvent], [SendFailureEvent], [LastEventLogEntry]) VALUES (12, is Tandberg. TMS. Service.TMSAgent.TMSAgentUserImportEventHandler', N ", N", ' 26-06-2009 04:00 ', ' 2009-06-26 16:00 ', ' 2109-06-26 04:00 ', N 'Log_All_Pending', 1, 1, 0, not Log_ScheduleUserImportEventHandler_Description |', N ", not 2009-06-26 09:05:52 | Log_Settings_Created', N 'EVERY1DAY', ' 2009-06-27 04:00 ', 0, NULL, NULL, 1, 0, 0, N ");

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] OFF

  This should trigger it to start automatically.

  And no, you cannot set the time in the new model of commissioning.

  / Magnus

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Satelite L750 does not automatically pass the headphone

  I've been messing around with audio on the laptop, and now when I plug headphones into the Jack the laptop no will automatically switch to the new output device.

  The only way I have found to spend it was to change for audio by default, but I have to spend the time I finished.

  Is there anyway to switch when it detects that a new output audio device is discovered.

  Thanks dan

  This thread would be useful?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=256895

  Go to the dashboard-> Realtek HD audio Manager
  In the upper right corner, there is a small yellow folder called "connector settings.
  There you can find the setting "enable pop-up dialog box, when the unit is plugged.
  Plug in a headset and select the option "headphones". Then the sound only through the headphones

• WRT310N does not automatically update the Internet DYNDNS IP address

  Does anyone know if the WRT310N send period updates internet IP DYNDNS address or it sends only when IP address changes.  I can send an update manually, but the newspaper of the DYNDNS host don't watch no updates other than sen manually those.  Thank you.

  It will send the update only when the IP Internet of the DYNDNS address has changed and it should do it automatically... If you're like most DynDNS.com customers, you have a dynamic IP address that changes periodically (monthly, weekly or even daily).