He would work to have 3.2 and 4.2 on the same server of db with different web servers?
Hello
I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)
We have three new Windows servers running 2008 we upgraded to.
So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.
Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?
APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.
I don't know what is the relevant motivation?
Tags: Database
Similar Questions
-
Can I have VMWare Player and Virtual Box to the same PC?
Can I have VMWare Player and Virtual Box to the same PC?
Can perform the same two times?
Hello
Yes, that's correct.
--
Wil
-
Currently, my system is Windows 7 64 bit with 8 GB of RAM. I know that the 32-bit version can use only 2 GB but it runs on a computer that has more, right? Assuming I'm right about that, if I install both, should I rate the same programs and data?
You can install the two operating systems on a player, but you must create a separate partition for one of them.
You can share data, but not the programs that each application must be installed in each version.
That said, I see no benefit in the same version of Windows, but with different pieces of dual-boot. Why would you do? -
Can I install the Hyperion, WebLogic, and Oracle products on the same server
I want to install 11 Hyperion, planning products and related products in a production environment. I find the following statement in the document of Hyperion: "the application server and the Hyperion product that you deploy must be installed on the same computer." This confused me.
The next is what I think: weblogic server in sever installation 1 (UNIX), install the Oracle server in 2 performance management (UNIX) and install Service Foundation Hyperion Essbase, server and Planning Server 3 (Windows), it's a good solution? What I have to install Weblogic and Hyperion server products in the same Windows machine?
(Here, contain the Oracle Hyperion and Hyperion willl deployed on Weblogic server repository data). Can recommend you a better solution? I think that, if I use multiple servers for different purposes, the performance may be better.
Please advise and correct me, thank you!
BobYes, if you need to share the burden between products that use web applications then you need to install weblogic on servers that you divide to load between.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Question about 10 g and 11 g on the same server
I installed 11g on my dev machine (RHEL) and that you have managed to create a new database. Over time, I will also work on upgrading existing databases that reside in 10 g. But, before you start, I was wondering what I should do to be able to connect remotely to each instance. I can't find any documentation on how to configure tnsnames and the listener in a stream environment. I try to minimize service disruptions as well. Any help would be appreciated.You have two options:
(1) run a single listener that will listen to two databases.
(2) run several headphones each listening to different databases.
Personally, I like several headphones, but have successfully used two approaches.Approach unique listener, use the listener for the latest version of the database. Usually, it will be retro-compatible and support for connections to an old database. The older listener may not function properly with a newer database.
In the listener.ora under your 11g ORACLE_HOME/network/admin file, you must specify the ORACLE_HOME database for each database that the listener will listen.
For example, I have the following listener.ora:SID_LIST_LISTENER = (SID_LIST = (SID_DESC=(GLOBAL_DBNAME=ora111)(ORACLE_HOME=/Oracle/product/11.1.0/db_1)(SID_NAME=ora111 )) (SID_DESC=(GLOBAL_DBNAME=ora102)(ORACLE_HOME=/Oracle/product/10.2.0/db_1)(SID_NAME=ora102 )) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.1)(PORT = 1526)) ) )
For multiple listener approach, you'll need each listener to listen on a different port. The example above to listen on port 1526. The default port is 1521.
For many headphones, each will have its own listener.ora file, and each must have its own port number.
The tnsnames.ora file must specify the correct port number (the one that is using the listener for this instance).If you have connection problems, remember that you can test the Oracle name resolution using tnsping
Make sure the name of your database is resolved (using tnsnames.ora or ldap or whatever you use) to correct host, port, and SID/service. -
FMS 3.5 R2 2012 and with Wowza Server on the same server
Hello
Is it possible to have my old FMS 3.5 on the same server, as I installed 3.6 Wowza?
The server is windows Server R2 2012.
I installed the FMS, but it does not start after installation and bat files cannot start/stop service either. It makes not a difference if I go to Services to start manually, the sample files still does not work.
Any suggestions?
Thanks in advance
HC
FMS 3.5 is not supported on Win 2012 R2. You can give it a spin on the platforms supported listed in https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.
~ Ashish
-
Apex 3.2 and 4.0 on the same 10g Server?
Hello. I have apex 3.2 on a 10g server. It is in production with some applications.
I want to do some tests, to import applications, refuse, etc. on 4.0 but leaving 3.2 upward and the work.
Can I install apex 4.0 on the same server, leaving the 3.2 work?
and... The html even Server CAN access applications and systems?Andres,
You can have only one version of the APEX by Oracle instance. For example, you cannot run 3.2 & 4.0 simultaneously.
You can configure a server to Oracle's HTTP for the two APEX 3.2 & 4.0.
Some advice: If you want to test APEX 4.0, so it is best to not do it on the same server/instance that you have in production. Even if you have only one machine, you can easily create an instance of Oracle in the Amazon Cloud, or use VMWare to run your tests.
Thank you
-Scott-
http://spendolini.blogspot.com
http://www.sumneva.com -
Can the ESXI 5.0 and Vmware View coexist on the same server blade
Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?
Kind regards
Ismail
VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.
-
I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?
You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.
-
I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative
Hi irod,.
Greetings.
- Latest version of camera raw for CS 6 is 9.1
- Check now if your camera is to 9.1 or higher
- If requires 9.2 or later, then you should switch to PS CC or use the dng converter
- But if it is support less 9.1 then use this link to install camera aw 9.1 and then try to open pictures
- If still you have questions then please paste a screenshot of the issue in more detail.
Concerning
Rohit
-
HP office jet j6450: must have a black and color cartridge into the printer to print?
must have a black and color cartridge in the printer to print? keep paper bike whatever that either were not sent to the printer. only black cartridge in the printer
Hello
This is true for many printers, to protect damages (such as print heads, hooves...) they need all inks to work.
Kind regards.
-
I'll be out of town for a few days and I would block all my personal files and folders again, let the internet open to all users.
How I do.
Thanks for any help!
I'll be out of town for a few days and I would block all my personal files and folders again, let the internet open to all users.
How I do.
Thanks for any help!
You mean that other users do not have their own user accounts?
They all connect to your own account?If they all have their own user account to log on, they can't see your personal files, unless...
1. your files in public folders.
2. they have your password to login to your own account.So, please clarify.
t-4-2
-
Windows Media Center does not work on both my XP and Vista computer. The two events lastnight
Windows Media Center does not work on both my XP and Vista computer. The two events lastnight
Hello
For someone to really help him, it is important to give as much information as possible.
You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?
If it happened "yesterday" did you updated anything or whatever installed?
Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?
What TV card are you using and have you verified that this works correctly?
If you get not a photo is the antenna in place properly?
Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;
-
Why use push and pop where addChild and removeChild can do the same work?
Why use push and pop where addChild and removeChild can do the same work?
What is the advantage of the push and pop on addChild and removeChild?
It depends on what you're trying to accomplish. If you explain more about under what circumstances you would use them, a more definitive answer can be provided. Push and pop of the work for arrays. addChild and removeChild work for displayObjects.
-
I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you
Hello
Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.
You can do it from the control panel as well.
This would make CD player as default PDF Viewer.
Concerning
Sukrit diallo
Maybe you are looking for
-
I'm selling my Time Capsule and before doing so would erase the content, what do I know will take time. As an electronic device, I expect the buyer to want to see that the functions of TC with Time Machine. Yes, I already backed up all of the content
-
Options->; privacy->; Cookies Exceptions Block list / green suddenly empty
I had a very long list of exceptions, and now they are all gone. I restarted the computer a couple of times and they have always gone. No idea what may have caused this, and if it is possible to get them back? Please notify. Thanks in advance.
-
In the start menu to the top of the page of firefox, Miss me my;--file, edit, view, fav, tools and help bar, also, the arrows back & front, only bars that are exposed are; the most visited, getting titles began later, & less than; AVG, search and sta
-
Synchronization horizontal and vertical refresh for Satellite M55
Hello. I have a M55 - S135 laptop (Satellite) and I'm trying to find the horizontal sync and vertical refresh rate so that I can configure X on my Linux distros. I am running Slackware 12.0 and Xubuntu 7.10 now. X works fine on both of them, but I wa
-
Elitepad 1000 2: the password BIOS Reset 2 1000
Trying to reset my BIOS password and I get a code system with disabilities to 59340566? Help, please. Thank you!