ASDM not working on ASA5510
Hello
I'm trying to access my ASA of the ASDM without success.
I want to enable to access from192.168.97.0 network
I join my config file
Thanks a lot for help
Hi sylvain.rose,
Try running this command:
No asdm image disk0:/asdm.bin---> you are right I do not know where it comes from.
ASDM image disk0: / asdm - 715.bin
Hope this info helps!
Note If you help!
-JP-
Tags: Cisco Security
Similar Questions
-
ASDM does not work in the external interface
Hello
I'm new to ASA. I have ASA 5510 and strives to enable ASDM access through the external interface. but is not working for me... not. I set up a public ip address on the external interface and activated the ssh and asdm. SSH works but asdm does not work. This is a test environment, so I have not yet set up an ACL.
VPN-TEST # show version
Cisco Adaptive Security Appliance Version 8.2 software (1)
Version 6.2 Device Manager (1)
Updated Wednesday, 5 May 09 22:45 by manufacturers
System image file is "disk0: / asa821 - k8.bin.
The configuration file to the startup was "startup-config '.
VPN TEST up to 4 hours and 33 minutes
Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1600 MHz processor
Internal ATA Compact Flash, 256 MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB
Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
Start firmware: CN1000-MC-BOOT - 2.00
SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
0: Ext: Ethernet0/0: the address is d0d0.fd1d.8758, irq 9
1: Ext: Ethernet0/1: the address is d0d0.fd1d.8759, irq 9
2: Ext: Ethernet0/2: the address is d0d0.fd1d.875a, irq 9
3: Ext: Ethernet0/3: the address is d0d0.fd1d.875b, irq 9
4: Ext: Management0/0: the address is d0d0.fd1d.8757, irq 11
5: Int: not used: irq 11
6: Int: not used: irq 5
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes a basic license.
VPN-TEST # http see race
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
VPN-TEST # display running asdm
ASDM image disk0: / asdm - 621.bin
enable ASDM history
Could someone please help me know what Miss me?
Kind regards
Praveen
That's it, please add any combination of encryption by using the command "ssl encryption" algorithms, please add them in one line next to each other, and you can use '? ' to check available combinations.
Kind regards
Mohammad
-
AnyConnect-Always-on does not work
Hello
I have been always - on VPN on ASA5510 (version 9.1 of the software).
I used a Windows PC to connect, the always-on the job very well.
But on the iphone (ios8.1.2) or android smartphone the always - it did not work.
Tried specific to the list of servers "always connect" in profile anyconnect Alway-on still not connect.
My reference document:
http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...
Hi Mike,.
Always active and TND is not supported on mobile platforms. Yes, you are referring to the correct document however he speaks the Windows and Mac OSX, and he doesn't speak of mobile platforms. Please see below why it is not supported.
- Always on (forced) VPN - tie-ins including Web Security Appliance *.
Always On cannot be implemented on iOS because of the limitations of the operating system. Also, this feature might not at all desirable from the user point of view, because it would have repercussions on the life of the battery and could be talkative that the iPhone has left wifi to 3 g and back in weak signal conditions.
- Detection of trusted network
TND is not possible on iOS due to limitations of the operating system. The best thing is to use the "VPN on demand" feature, which can be used to direct the AnyConnect to launch whenever we communicate with the hosts specified IOS.
Let me know if that answers your question.
Thank you
Vishnu
- Always on (forced) VPN - tie-ins including Web Security Appliance *.
-
excludespecified does not work
Hello world
I worked with a VPN for remote access, where everything must be sent through the tunnel via VPN, but specific to a public IP traffic. I tried to use the "excludedspcified" statement in group policy, but it does not work. When the VPN Client must be connected to the ASA and I check the details of router-> secure routes I can only see 0.0.0.0/0. But when I use the statament of "tunnelespecified" it works as it should and Secure routers are registered correctly.
My configuration is:
standard permits the TUNNEL of SPLITTING host 72.XX access list. XX. XX
!
internal TEST group strategy
TEST group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy excludespecified
Split-tunnel-network-list value of SPLIT TUNNEL
!
type tunnel-group TEST remote access
General attributes of tunnel-group TEST
address admin-pool pool
Group-RADIUS authentication server
Group Policy - by default-TEST
IPSec-attributes of tunnel-group TEST
pre-shared-key *.
I find a Bug or something, but I found nothing. These are versions of software:
ASA: 8.2 (1) 11
ASDM: 6.2 (1)
VPN client: 5.0.07.0410
Thanks in advance,
Jose
Hello Jose,.
In your VPN client, you selected the checkbox "allow LAN access?
Can you please test with this option turned on and let us know the results?
Do not look only secure roads, after you activate that option try to send real traffic to the public IP address.
Daniel Moreno
Please note any workstation that will be useful
-
Can you please fix the problem? Appstore cannot update or install apps... App Store not worked yesterday.
We cannot solve a problem for you, but we can make suggestions of troubleshooting...
Have you tried restarting your iPhone yet?
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
-
Safari does not work after installing macOS Sierra
Safari and apple store does not work after installing macOS Sierra
Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.
-
My iPad Apple 3rd generation wifi + his cell phone does not work
MY 3rd generation Apple iPad, wifi + cell
model number MD408LL/a
Serial number DM * VGL
THE SOUND DOES NOT WORK
< personal information under the direction of the host >
All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?
-
I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone. iTunes sees it yet, but windows Explorer does not work. It seems that some setting has been broken through the update of ios. A way to solve this problem?
Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?
TT2
-
QuickBook 2015 does not work on OS Sierra
Hello! My quick book 2015 will not work on the newly installed MacOS Sierra. "You cannot use this version of Quickbooks 2015.app with this version of Mac OS" is someone has a solution to this problem
Seems what intuit has changed their Quickbooks for a right to use a month for their application
According to their web site. or a close to $300. cost for a licence of the only machine (more?)
Some research suggests that QuickBooks version 17 exist, maybe it's the subscription model
as their single version machine says it's version 16. For Intuit Quickbooks information, rely on them:
• For Mac - accounting software - Intuit QuickBooks:
https://QuickBooks.Intuit.com/Mac/
The subscription models, suggest that they offer a "free trial" then a monthly fee.
I have not read past the first page. -Not certain what options may exist, to Intuit.
And I'm not a user of QuickBooks...
Edited to add: see quickbooks support:
Is Quickbooks for Mac going to Sierra? Is there an another altern...
https://community.Intuit.com/.../1394425-is- QuickBooks- for-mac-goes-for -sierra- is-t
Update 2015 is here: http://http-download.intuit.com/http.intuit/Downloads/2015/US_R8/QuickBooksProMa c2015.dmg
- IntuitBiscotti
- 7 days ago
Good luck and good hike!
-
Open the link behind Mail does not work
Sierra using my link opened behind Mail does not work. The link opens on the top of the window.
This option works for me in Sierra... is working for you with your previous version of the OS?
-
iPhone 5 home button does not work after ios 10
My 5 Iphone Home button does not work after update final IOS version of 10.
The home button works on the first push to wake the phone but it will not open the phone the second button.
I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.
You attempted to restart your phone?
You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears
-
Do not disturb (on request) does not work
I have an iPhone 7 more with iOS 10.0.2. I had set up as NEW when I got it. I use the function do not disturb I SLEEP every night to block the incoming notifications apps and emails (including work with the application Outlook email). I leave the phone won't cut not so I can make sure my alarm wakes me up the morning. But it does not work. I still wake up emails and notifications of the app. It worked on my old iPhone with iOS 6, 8, 9 or even 10.
I see a lot of old messages and questions about DND not work, but they were more specific to older phones and ' iOS.
Anyone else having this problem?
Any ideas for help?
Thank you.
I'm sure that I understood this.
I had "only when locked" checked and not 'always' in settings do not disturb.
I leave my iPhone unlocked all night using the bedside table Central app as my alarm clock.
There we go.
-
Contact ID does not work after update iOS10.0.2
http://www.Macworld.co.UK/how-to/iosapps/iOS-10-troubleshooting-tips-3646690/
Troubleshooting iOS 10 tips: Touch ID does not work
Some users have reported that a previously happy Touch ID installation stopped working when they made the update to iOS 10. It is a pain, but rescuable - you will probably need erase your fingerprints and re-enter.
First, however, try something simpler: go to settings > Touch ID & password, enter your password, then press the buttons next to pay Apple and iTunes and App Store so that they become white. Turn off your iPhone and turn it off again, then go back to settings and turn the two knobs back to green (you will need to enter your password Apple ID).
Who fixed the problem? I haven my Aff!
If not, go through the fingerprint stored in settings > Touch ID & password - press each of them in turn - then erase fingerprints. Then go back and press Add A digital footprint and put back them in. It's a bit complicated, but it should fix the problem.
I did all that, but the problem could not be solved.
Try the following steps:
1. go in the settings, press button ID & password, enter your password. Then turn off iTunes and App Store. Restart your iPhone or iPad. Return to Touch ID and password in the settings and re - turn on iTunes and App Store. Press Add a fingerprint to add another print.
2 remove and re-add fingerprints: settings > Touch ID & password > enter your device code > scroll to find fingerprints fingerprints. Press the fingerprint, that you want to remove, and then press DELETE.
3. restart your iPhone by pressing and hold the Sleep/Wake and home.
-
Projector does not work after upgrade from Sierra
My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.
Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index
-
Scan with preview - several Pages of a PDF THAT does not work in Mac OS Sierra
Hello everyone,
I had upgraded my Macbook Pro (early 2011) to Mac OS Sierra. A famous feature of older versions of Mac OS is to use Preview to scan documents to PDF format, joined the pages scanned all of a single document.
After upgrading to Sierra this feature does not work correctly. The pages are not more combined into a single PDF. Anyone who has observed the same problem?
Best regards from the Germany
Jörg
Yes, it's been posted here several times.
Maybe you are looking for
-
Cannot move photos to the computer after the upgrade to iOS10
Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer
-
HP Pavilion a6551nl: HP Pavilion a6551nl how to activate the integrated video
I have a HP Pavilion a6551nl and the video card is a failure. I spent with a Compaq desktop, I have, and here he also fails. Compaq video card works fine in my HP Pavilion a6551nl. I read that the HP Pavilion a6551nl has integrated video, but that it
-
Need to remove the built-in Administrator account.
Original title: profile I have a Director profile that is on my computer that I did not koow was on the computer because it is used. I don't have anyone to go into the person that I bought the computer because I bought it on amazon. I know that the o
-
Windows supports or not?
Hello! I was recently contacted by phone by someone claiming to be an external body selected by Windows in the face of the difficulties I have experienced recently with my Dell Vostro 1700 computer. Recently he has been giving me messages that my ba
-
Message comes up never start up and disappears if clicked.How can I eliminate this pesk?E-mail address is removed from the privacy *.