ask the RCC signature even if not necessary

Similar Questions

• Tecra A7 still sees the AC adapter - even if not connected

  Hello

  I've had this problem for awhile now. It happened quite suddenly, one day it worked great, the other day and the following days later, it didn't. The problem is like this:

  My Tecra A7 still "sees" the adapter connected, even if it's not! This can be quite annoying if I turn the laptop on its battery, because it will automatically run on full power b/c of the Toshiba power management utility is installed. That said, running at full power, the battery is discharged very quickly. Beside that, if it is disconnected from the net power for some time, the laptop battery is draining, even if turned off all the time!

  Of course, the problem is not huge. I can always manage the electricity utility myself if necessary, but as you can imagine this probem is quite annoying. And I really want a solution to this problem.

  If someone knows the solution?

  Thanks in advance,

  Arjan

  Hello

  That means the power icon in the taskbar says?
  Have you noticed changes especially after connect/disconnect the power adapter?

  I think it might be a software problem
  I mean the energy saver.

  You he should remove the system and needs to be reinstalled the version downloaded from the European driver from Toshiba site.

  See you soon

• Code Signing - cannot ask the application signature that requires to be signed

  Hello

  I'm looking for, via the codesign tool, to the signature of the request for two .cod files. Necessary for the other to exploit one of the .cod files. For example, I have a library and a cldc app that depends on this library.

  I am able to sign completely (RBB, CPR and RRT) library cod. However, on request cod I can sign only with BAR and CPR. No TRNS. Of course, when I try to run my application on my device, it requires the signature of the RRT. But the option doesn't even exist in the to sign!

  How can I register my application correctly?

  Add the cod again to the sigtool makes no difference. I was unable to find all the other useful posts in this forum or in the documentation.

  Thank you!

  Figured it out. It is a failure of the software tool signature to acknowledge that the CLDC app should be signed with the same signatures than any of the libraries it depends on.

  What fixed it:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

  Can I give congratulations to myself?

• S430 trackpad and now the mouse drag when does not necessary

  My S430 is usually updated with all the drivers and software. Works on Windows 7 64.

  A few weeks ago the trackpad starts to be a real problem - perhaps after an update. When I use it to move the cursor instead of that he comes to select text or to pick up and drag items. It became a real problem. I was in a high humidity area and has been mentioned as a problem so I used just the trackpoint or mouse external instead.

  Now today for a short period the external mouse was also doing the same thing. Without touching the mouse keys, * even just move the mouse * has been supported and dragging around the screen or text selection elements. You can imagine it's very frustrating when the unwanted.

  I changed the mouse settings with no luck. Any suggestions very welcome. I'm starting to think that the solution would be to go back to older versions of the drivers maybe.

  Updated - after short time the problem comes back. So I have now uninstalled the driver for the touchpad on your advice and spin on the generic probably. So far its ok...

  Update: no, it was a waste of time. Same problem - when using the trackpad, the cursor is constantly striking, by dragging or by selecting things even though I'm very light with my touch. I tried to change the UltravNav. The pilot it changed to the Synaptics a 16.6 looks like. It's so frustrating! I looked to see if I could disable the 'click with trackpad' feature (that I never, ever had to do on any laptop ever) but it does not seem an option for.

  Update 2: so now after the removal of the driver again, restart, and restart again after the reboot, Windows application the Ultranav settings have disappeared since the mouse control panel and a 15.x Windows generic driver can be seen as being in use. I'll run with it for a while to see how it behaves. So far it seems ok...

• I'm using firefox 5.0 & I use a master password. Whenever I open firefox, it asks the password. It happened not in previous versions. Is there a way to stop popping up everytime, rather than turn off the password

  I'm using firefox 5.0 & I use a master password. Whenever I open firefox, it asks the password. It didn't happen in the previous versions of firefox. I don't want to disable my master password. Is there a way to stop what is happening each time? Is this a bug in the new version.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• I have cs5 and it was working fine and now he keeps asking the serial number even after that I put it and gives it the green check mark then it goes straight to that now

  I have cs5 and it worked very well and now he keeps asking serial number, even though I put it and gives the green check mark then it goes straight to that now or it just goes to the license agreement and when I accept it is going t - he once again.  I have uninstalled completely and then reinstalled several times and still the same thing.

  Csingleton11,

  WIN8 is not listed as an operating system that can run CS5 (see technical specifications); However, some users were able to run it in compatibility mode with success. See this link if you want to give that a try: CS5 installation on Windows 8

  Guinot

• Devices display in the bar side, even if not connected?

  Hello

  Hoping that someone will enlighten us;

  I have 2 iphones, a 5 and a 6 s that I connect to iTunes to backup and synchronize, normally when they are connected they appear in the sidebar as they should, then I can "eject" them away and they disappear from the sidebar when they are disconnected.  However, for some reason, they are both now show in the sidebar if they are connected or not, and I was wondering if this is correct, it is a new feature included in a recent update maybe?

  Any help would be appreciated, thanks.

  Tim

  Have you set up a connection Wi - Fi sync by chance? Sync your iPhone, iPad or iPod touch with iTunes using Wi-Fi - Apple Support

• Is the monitor of imagery needed on the taskbar if you do not print? How many...

  I have checked old solutions here and do not have quite the same issue, I would like to ask.

  I have the Solution Center on the old pc with XP. Works well, thank you, and several resources always help the XP'. I also have a HP with 8. How many resources it takes and don't forget that it is a netbook pc which tend to be more slow start. All I could eliminate might help.

  My question is on the XP that monitor must be loaded every time if you do not plan to print? Could not be loaded just before the solution center if that was the program that I run?  Thank you very much!

  'Jack :-{D '.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  Hi @jnepoore,

  Now, I'm not 100% certain, but I'm sure that the digital imaging monitor is not necessary. However it helps maintain a constant communication between the printer and the software. Take a look at what I found:

  Posted by rnfolsom

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the ink levels, get an out of paper message, scan from the device to the computer and so on. Its not necessary, but it will limit the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom
  

  P.S., Below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq
  

  Re: WITHDRAWAL HP Digital Imaging Monitor Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/...

  I know that the information is specific to Windows 7, but the bottom line is, no, there is no need to run all the time. Registry keys are significantly different for XP as they are for Windows 7 while blurb does not apply. I just copied the post in its entirety for you to read through.

  Another thing to consider is uninstall the software and then download and install the base driver.

  Please let me know if this is useful, or if you have any other questions. I'm happy to do my best to help.

• Synchronization of the Email Signatures with all Apple devices

  I can't get my email between my iPhone and my MacBook Pro accounts (both very new devices - MacBook Pro - iPhone 6s 2015 +) signatures of syncing either!  Someone else has experienced this problem and especially someone knows a solution?

  If you are referring to the pictorial signature - it is not easy to get on the iDevice

  You can go into the settings - Mail, Contacts, calendars - scroll until the Signature and create a

• ESXi 3.5 local disk storage is not necessary?

  Hello world

  just a quick question to confirm my suspitions.

  We have 2 servers ESXi HP integrated with 4 250 GB raid 5 SAS disks each. We also have a San with all virtual machines on the san.

  IM I correct to assume that drives the on ESXi servers are not necessary and can be removed?

  Peter

  Hello

  If you have the AP enabled in your Cluster, then you must enable userworld SWAP and this

  can be placed on eighter SAN or local disk. In order to check this part first.

  ->> http://www.virtualtroll.com/?p=183

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004177

  Best regards

  Lars Liljeroth

  -

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• iMac constantly ask for password which is not necessary

  Every 15 minutes or a message appears at the top right of my screen asking my e-mail password. It is not necessary because my mail comes in fine. This has happened after loading of El Capitan. If I put my password in and then said that he does not recognize.   Thanks for any help.  James.

  Maybe he asked the outgoing password.

  Could leave the post.  At least the message will disappear.

  R

• My iPad Pro asks me to enter my Apple ID after a stop of the night.  This was not the case on my iPad Air.  What can I do to eliminate this step?

  I have looked through all the settings and can't find anything you need to stay connected to iClou.

  Tap settings > iTunes & App Stores and then press on your Apple ID then View Apple ID. Enter your password.

  Then restart your iPad and see if she asks your Apple ID even once. It should not.

• Download the file is missing. Not asked where I would like to save file, only the 'Save' button appears

  When you download a file, I ask me where to save the file.  He asked me just to save it or not.  Then, after you save the file, I try to find the file, but it is not in the usual directories when I download files.  I tried to download from CNET.  This just started today.  Don't remember any recent downloads either.
  That's happened? It is not under My Documents to my profile or my Local Settings\Temp directory either.  I did a search for the file name, even in hidden folders.
  I am running Windows XP Home Edition.  [By today standard T - Rex, but it's the only one I use for office work, no video editing work.]

  Hi WingersMedia,

  1. What web browser do you use to download the files?
  2. Are you having a similar problem with all files or any download specific file only?
  3. Are you able to download and save files from other sites?

  I suggest that you try to download other files on the same site and check if it works.

  I suggest you check that the recording location of the file when you are prompted to save the file and check later to this place.

  Also check out the link below to put on with similar problem and check if it is useful if you are using Internet explorer as your web browser.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE-7ON-downloading-files-option-to-save-asopen/9ee22c03-8fc3-4225-9bde-ee0e8e3c0fe9

• The computer wont even start until now. He asks me to do a chkdsk/f, but it gives me no option to do so. What should I do, should I hit?

  I tried to do a system restore, and something failed. The computer wont even start until now. It opens and asks what I want to start in safe mode windoms, normally or the way previous. then he asks me to do a chkdsk/f, but it gives me no option to do so. There is nothing there to click and my mouse will not be displayed. What should I do, should I hit?

  Hi Mnmitch,

  -You receive an error message/code, by chance?

  Follow these steps:

  Method 1: Run safe mode system restore

   

  For instructions, see the following article:

  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP

  Method 2:

  To do the check disk on your computer, see these articles:

  How to perform disk error checking in Windows XP

  Chkdsk