ASM disk unavailable after reboot

Similar Questions

• ASM disks disappear after reboot Linux

  Hi all
  
  I am trying to install a demo of OEL 5.3 dedicated Oracle 11 g with ASM on a laptop.
  It is not a production configuration, I surely agree, but I hope it's good enough for the demo.
  My problem is with the DSO and asmlib.
  I went through the steps of the proclamation of disks asm (/etc/init.d/oracleasm createdisk ASM/dev/Vol...) and I can see the ASM disks via oracleasm listdisks.
  Everything looks ok, until I restart the machine.
  Then I can see is more disks (listdisks after scandisks) asm returns nothing, but the creatdisk fails.
  
  So, I guess my disks were marked as a disc of the DSO.
  But then, I wonder why I can't see in the list.
  
  I probably went wrong somewhere, but I can't find where.
  
  No one to help?
  
  Thank you very much in advance veru.
  
  G.

  I came across the same sort of thing on RHEL 5.3.

  You will find documentation on metalink... document 558596.1 (https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6282339176010950992:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 558596.1, 1, 1, 1, helvetica)

  Basically, in my version, I had to comment on this one line in /etc/udev/rules.d/90-dm.rules

  #KERNEL == "dm-[0-9] ' * ', ACTION =="add", OPTIONS += 'ignore_device'"

  It is a newer version of EL/HR 5. If you have an older version, you can find it here: /etc/udev/rules.d/50-udev.rules
  Same line should be placed in the comments here...

  Reboot after this change.

  Only it solved for us... hope that helps.

  Cayenne

• Disc SSD data store unavailable after reboot

  I have a Kingston SSD drive installed in a Dell T620 SAS (Controller H710) basket bottom. It is configured RAID 0 (disk). Therefore, it is OK, and I created a data store using the full disc. It works very well in the virtual machine that it is assigned to you. However, when I reboot and look in the configuration of the storage is not there. I can add and it remembers. The bad news is that the virtual machine, it is affected to cannot start as long as I add back in manually.

  A look at the list of devices, it shows that mounted. The difference between it and other readers is it says unknown partition format, it also says non - ssd.

  I'm just against a unit of failure in charge here? I do not see the SSD drives listed in the list of supported devices, but I hardly find this page.

  < small mug shot >

  Why he let me a second hard drive configured to use the rest of a store of data and then not start because there is not enough room for the Swap and not remove the second disk hard when I tell him?

  < / small rant >

  Hi Lou

  Why do not connect you to a port SATA (my last one)?

  This seems to fix. Also, he appeared as an SSD and remembered all the stuff.

  I guess it has to do with the SAS/RAID connection. Will try another drive to be sure.

  Lou

• Settings memory ignored after reboot (ASM instance)

  Hi all

  ASM version: 11.2.0.4

  OS: SunOS fmsdb 5.10 Generic_150401-18 i86pc i386 i86pc

  I'm trying to reduce the setting memory_max_target on the ASM instance.

  
  

  Here are the current settings of the memory;

  SQL > target setting sho

  NAME                                 TYPE                              VALUE

  ------------------------------------ --------------------------------- ------------------------------

  memory_max_target big integer 1 G

  memory_target large integer 1 G

  pga_aggregate_target large integer 0

  SGA_TARGET large integer 0

  I just changed the memory_max_target and the memory_target to 544 M in spfile. I can see the new values in spfile. Here's the new values;

  
  

  SQL > select NAME, display_value from v$ spparameter whose name IN ('memory_target', 'memory_max_target');

  NAME DISPLAY_VALUE

  ---------------------------------------------------------

  memory_target 544 M

  memory_max_target 544 M

  
  

  After the reboot of the ASM instance, these new values ignored by Oracle.

  
  

  Here are the current settings of the memory after reboot;

  SQL * more: Production of the 11.2.0.4.0 version on Tue Mar 10 14:56:30 2015

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup

  ASM instance started

  Total System Global Area 1068937216 bytes

  Bytes of size 2257712 fixed

  1041513680 variable size bytes

  ASM Cache 25165824 bytes

  ASM starts up

  SQL > target setting sho

  NAME                                 TYPE                              VALUE

  ------------------------------------ --------------------------------- ------------------------------

  memory_max_target big integer 1 G

  memory_target large integer 1 G

  pga_aggregate_target large integer 0

  SGA_TARGET large integer 0

  Why these settings changed?

  Thank you

  Erman

  Have a read of the default value and value MEMORY_TARGET & MEMORY_MAX_TARGET Minimum for ASM 11.2.0.4 and after (Doc ID 1982132.1)

  on Oracle support and you'll see why your memory_target is 1 GB. I did not use ASM recently and never paid no attention to the memory allocation when I did (because there was no reason to).

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

• Not ready external hard drives after reboot

  You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

  I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

  The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

  So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

  What do you say?

  Try to connect the external disk after reboot completed if he could climb.

• Can not see my own account after reboot

  After reboot I can only see the original user on my Mac + comments, but not the one I added.

  The original is my wife so if it connects inn, first of all, I'm able to move my user by logging out (users obtained all visible) or by selecting my self in the menu to the left of the projector users.

  Upgrade to 10.11.4 to see if there was a problem with 10.11.3 who was present when the account is added.

  It's annoying to sort of not finding your own account and I wonder what's wrong.

  Anyone with an idea?

  Hello dusanofrode,

  Thank you for contributing to the communities of Apple Support.

  If you cannot connect to the original account on your MacBook Pro, looks that FileVault has been activated. It encrypts the bootable floppy and requires that the original to "unlock" before user other users can subscribe in their user accounts. I can see how that might be irritating in the circumstances, and I have a few suggestions to check the situation and helps connect you to your account a little more quickly.

  To see if FileVault is turned on, connect to the user account of your wife and choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault. You can find more information about FileVault in Use FileVault to encrypt on your Mac startup disk.

  If FileVault is turned on, you have two possibilities to be able to connect to your user account to start.

  • "Activate" your user account to connect to start up the Mac. You can do it in the preferences of FileVault (located under Security and confidentiality in system preferences):

  Allow users

  Click to enable users to log on at startup and unlock the encrypted information on the Mac. Users who are not enabled need an administrator to log on before you can use the Mac.

  Of OS X El Capitan: FileVault pane of security & privacy preferences

  • Turn off FileVault:

  When you turn off FileVault, the encryption is disabled and the contents of your Mac is decrypted. Decryption may take some time, depending on the amount of stored information. However, you can still use your Mac to perform other tasks while the information is that is decrypted.

  1. Choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on turn off FileVault.

  4. Click on disable encryption.

  Of OS X El Capitan: turn off FileVault encryption

  All the best.

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• If you use network storage, configure ASM disks with external redundancy groups

  Hi Experts,

  If you use network storage, configure ASM disks with external redundancy groups. Don't use groups of Oracle ASM failure. Oracle failure groups consume cycles additional CPU and can run in unpredictable ways after suffering from a disk failure. When you use external redundancy, disk failure are transparent to the database and do consume no additional database CPU cycle, because it is discharged on storage processors.

  This does not mean

  • RAID 1 + 0 for diskgroup + REDO1
  • RAID 1 + 0 for diskgroup + REDO2
  • RAID 5 for diskgroup + DATA
  • RAID 5 for diskgroup + FRA

  Is this one suggested, the recommended best practices for oracle on VMWARE?

  
  

  Thank you and best regards,

  IVW

  
  

  Hello

  You can check the storage analysis as well...

  http://www.Dell.com/downloads/global/solutions/tradeoffs_RAID5_RAID10.PDF

  discussion of the Oracle

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:359617936136

• Resync ASM disk in 12 c

  Hello

  Please can someone tell what is the difference between ASM resynchronization and consolidation of disk drive?

  Are they different? If so, what is re-synchronization happens and when to rebalance?

  Thank you

  Fast ASM disk Resync is used to recovery failure a failure to make temporarily unavailable group is considered transient failures.

  As the disconnection of the cable, controller failures or interruptions of supply disk or host bus adapter current.

  You just put a time (duration) where ASM Diskgroup will be to track all the changes up to recover this failure. If records are retrieved using the last State when, down disc Resync then update all the blocks on the disk recovered from survive failgroup.

  If drive failure is not picked up within the window of time, records are automatically removed from the diskgroup.

  The process of adding these drive broke diskgroup start the rebalancing process.

  Resynchronization occurs when updating the out-of-sync disk track.

  Rebalancing occurs when data are not balanced or when to add new disc on diskgroup.

• Installation of Oracle 11 g R2 grid does not detect the ASM disks

  Hi guys,.

  I'm trying to install Oracle 11 g R2 RAC and as part of the installation of the grid, the Setup program does not detect the ASM disks.

  Here are the outputs for some commands.

  [root@rac1 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'ASMDATA2 '.

  Instantiation of disk 'ASMDATA1 '.

  [root@rac1 ~] # oracleasm listdisks

  ASMDATA1

  ASMDATA2

  [root@rac1 ~] # ls - ls/dev/oracleasm/disks

  Total 0

  0 brw - rw - 1 grid asmadmin 252, 3 14 May 17:18 ASMDATA1

  0 brw - rw - 1 grid asmadmin 252, 2 14 May 17:18 ASMDATA2

  I already tried to reconfigure Oracleasm (oracleasm configure - i) but no luck.

  I would be really grateful for the help here as its been a few days now and want to complete the installation as soon as possible

  Concerning

  Praveen

  Thank you Ricardo, I see now the disks after you change the path from discovery to/dev/oracleasm/disks

  

• Not correct ASM disk size

  Hi all
  
  I'm dealing with an interesting event in ASM. Summary of the problem;
  
  + FRA size 400 GB and free 175GB, the lsdg like this command output space on below;
  
  ASCMD > lsdg
  Name Type State Rebal Unbal sector block to Total_MB Free_MB Usable_file_MB Offline_disks Req_mir_free_MB
  EXTERN MOUNTED N N 512 4096 1048576 409600 175717 0 175717 0 FRA.
  EXTERN MOUNTED N N 512 4096 1048576 2252800 440059 0 440059 0 DATA.
  
  According to 'the' result of command FRA 265 GB size
  ASMCMD > cd + fra
  ASMCMD > of
  Used_MB Mirror_used_MB
  26515 26515
  
  So two value is different. I thit it is because we are questioned same area. Do you know why the two news are different?
  
  Perhalps it may be help response from your answer that, depending on the result to the "' select * v $ flash_recovery_area_usage;" " All the FRA in SQL * more.
  
  SQL > select * from v$ flash_recovery_area_usage;
  
  FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
  ------------ ------------------ ------------------------- ---------------
  CONTROLFILE 0 0 0
  ONLINELOG 0 0 0
  0 8 ARCHIVELOG.92
  BACKUPPIECE 0 0 0
  IMAGECOPY 0 0 0
  FLASHBACKLOG 5.84 0 118
  
  Thank you...

  Hello

  Unbalanced disc can cause the missing disk free space does not allow to make any allocation to a disk group because each file should be evenly distributed across all disks by ASM political stripping.

  Configuration asymmetric discs and some operations on ASM disks can create this type of problem. Frequently, the problem must be resolved after a succesfull rebalance as much as all the drives have the same storage capacity, and there is no underlying hardware problem.
  The most common reasons may be the following:

  1 - the capacity of the disks within the ASM diskgroup are different
  2 - ASM instance is shutdowned normal/immediate before rebalancing is complete.
  3-disc is a FALL / HUNG State
  4. after an order to add disk rebalancing is still in place

  You can also try:

  ALTER DISKGROUP FRA CHECK ALL REPAIR;
  

  PS: Make sure you have these files on FRA was backed up somewhere safe.

  Kind regards
  Levi Pereira

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• How to solve the problem of 'ASM disk group is inaccessible' slave VM rac2?

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 using 2 virtual machines (VM main rac1 and rac2 VM slave) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  Grid and data base RAC have been installed successfully for VMS rac1 and rac2.
  I use the slave rac2 VM test data grid and CARS because rac1 disk is full.
  The problem is that the OCR file is not available or currupted in the rac2 VM slave. To know his reasons, I check permission on disc ocr as below:
  
  [ora11g@rac2 bin] $ pwd
  / U02/11g_db/ora11g/racdb/bin
  
  [ora11g@rac2 bin] $ srvctl start asm
  
  RPRC-1070: could not verify if the ora.asm resource is registered
  Cannot communicate with crsd
  
  [ora11g@rac2 rac2] $ pwd
  / u01/app/Grid/log/Rac2
  
  [ora11g@rac2 rac2] $ cat alertrac2.log
  
  Last lines:
  [/ u01/app/grid/bin/cssdagent (5779)] CRS - 5822:Agent ' / u01/app/grid/bin/cssdagent_root "disconnected from the server. Details at (: CRSAGF00117 :) in u01/app/grid/log/rac2/agent/ohasd/oracssdagent_root/oracssdagent_root.log.)
  2012-03-20 13:44:55.914
  [ohasd (5149)] CRS-2112: the service ODE started on node rac2.
  2012-03-20 13:44:58.588
  [ohasd (5149)] CRS - 8017:location: / etc/oracle/lastgasp has 72 Advisory reboot log files, 0 were announced and 0 errors
  2012-03-20 13:45:07.555
  [ohasd (5149)] CRS - 2772:Server "rac2" was awarded to 'Free' the pool.
  2012-03-20 13:45:10.108
  [ohasd (5149)] CRS-2302: failed to get profile negotiators. Error CLSGPNP_NO_DAEMON (the demon GPNPD does not work).
  2012-03-20 13:45:10.251
  [gpnpd (5368)] CRS - 2328:GPNPD began the rac2 node.
  2012-03-20 13:45:13.037
  [cssd (5443)] CRS - 1713:CSSD daemon is launched in cluster mode
  2012-03-20 13:45:37.132
  [cssd (5443)] CRS - 1707:Lease acquisition for node rac2 number 2 completed
  2012-03-20 13:45:37.727
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK3; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:37.986
  [cssd (5443)] CRS - 1625:Node rac1, number 1, was closed manually
  2012-03-20 13:45:37.991
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK2; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:38.633
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK1; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:56.956
  [cssd (5443)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are rac2.
  2012-03-20 13:46:00.557
  [ctssd (5834)] CRS-2403: the time synchronization Service on rac2 host Cluster is in observer mode.
  2012-03-20 13:46:00.576
  [ctssd (5834)] CRS-2407: the new Cluster Time Synchronization Service reference node is host rac2.
  2012-03-20 13:46:01.000
  [ctssd (5834)] CRS-2401: time synchronization Service Cluster started on host rac2.
  2012-03-20 13:46:11.097
  [crsd (5856)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:12.085
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:13.338
  [crsd (5925)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:14.217
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:15.438
  [crsd (5940)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:16.313
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:17.539
  [crsd (5955)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:18.392
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:19.537
  [crsd (5988)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:20.468
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:22.636
  [crsd (6003)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:23.615
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:24.781
  [crsd (6022)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:25.713
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:26.885
  [crsd (6037)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:27.799
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:29.021
  [crsd (6052)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:29.925
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:31.136
  [crsd (6067)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:32.040
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:33.247
  [crsd (6082)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:34.172
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:34.173
  [ohasd (5149)] CRS - 2771:Maximum attempts to restart the resource 'ora.crsd '; does not restart.
  [ora11g@rac2 rac2] $
  
  The output of alertrac2.log, we have seen disk group ASM is inaccessible. So my question is:
  
  How to solve the problem of "ASM disk group is inaccessible" in the rac2 VM slave?
  
  
  Thank you.

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  Yes. I put the entry "SQLNET. AUTHENTICATION_SERVICES = (NTS)"input file sqlnet.ora.

  I ran the commands below:

  [ora11g@rac2 bin] $ pwd
  / u01/app/Grid/bin

  [ora11g@rac2 bin] $ ps - ef | grep pmon

  16219 ora11g 8602-0 12:29 pts/2 00:00:00 grep pmon

  [ora11g@rac2 bin] $

  [ora11g@rac2 bin] $ export ORACLE_SID = + ASM2
  [ora11g@rac2 bin] $. / sqlplus / as sysdba

  SQL * more: Production version 11.2.0.1.0 Fri Mar 23 12:33:15 2012

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Connect to an instance is idle.

  SQL > startup pfile = ' / u01/app/grid/dbs/pfile ".
  ORA-01031: insufficient privileges
  SQL >

  Sign in as SYSASM as

  . / sqlplus / as sysasm
  >

  As we see above shows the command $ ps - ef | grep pmon, my question is:

  First of all, are ' 16219 8602 ora11g 0 "process ID?

  Secondly, we need to kill one by one? For examples: kill-9 ora11g? Kill-9 16219?

  Laughing out loud. It's not the running process.

• CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0

  Dear Oracle gurus
  
  Our platform:
  ORACLE11G r2 RAC/GRID 11.2.0.1.0
  ReadHat Enterprise Linux5.3 64-bit
  
  
  RAC - 2 NŒUD
  [root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4534: can not communicate with the event Manager
  
  RAC - 1 NŒUD
  [root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4533: Event Manager is online
  
  RAC - 1 NŒUD
  crsd.log
  2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  RAC - 2 NŒUD
  crsd.log
  
  2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  Please help solve the problem.
  Let me know if you required information.
  
  Concerning
  Hitesh Gondalia

  hitgon wrote:
  We correctly the required permissions and ownership changes before we install the RAC.
  But after restarting the server.

  Please find the required papers.

  [root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  [root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1

  
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  Concerning
  Hitesh Gondalia

  Hello

  Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
  After this test restart again and see the result

  Hope this helps

  See you soon