Can not see my own account after reboot

Similar Questions

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• BlackBerry smartphones can not see my email accounts

  I've set up 4 different email accounts on my device but I can't see them, I see my email on the box messages but they are all mixed. I can't see my emails separately as before...

  any suggestions?

  You hear that see your icons of previous e-mail for each e-mail account individial on your BB homescreen?

  They were hidden? Moved to a folder?

  Try going to Options > Advanced > host Routing Table > Menu > register.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Any lucking finding?

• can not see my own website

  I have a new site online since this week.
  Everyone can see the site online, except me. I get the message:
  NOT FOUND
  the URL requested / admin on this server was not found.

  What can I do to fix this?

  Try to disable IPv6 or try another DNS server.

  • http://KB.mozillazine.org/Error_loading_websites#IPv6
  • http://KB.mozillazine.org/Error_loading_websites#DNS

• Typekit fonts do not work and can not see the creative cloud after login (white screen)

  Hello

  I spent all day on this. The file I'm working on using typekit fonts. These are like missing in inDesign. When I connect creative cloud using the small icon at the top of the screen, it opens a session, and then turns off.

  Here's what I did:

  -tried to remove the OOBE file, rename the OOBE file, rename the database file. It is said to close creative cloud, but I can't do this because it's a blank screen, so I stopped using the activity monitor.

  -tried to connect to adobe to see if I had strange characters in my account. Nothing does that my name and email. My connection has an @ in it, because it is an email address, but this is the only character that I can see.

  -J' I updated my system, thinking maybe that was the problem (now on El Capitan 10.11.2)

  -As soon as I log in, I just get the blank screen every time.

  -J' tried to uninstall creative cloud, but it says that it can't uninstall because there are Cloud Creative applications on my computer in need.

  Meanwhile, I have a deadline and cannot do my job without fonts. What should I do?

  Thanks for any help.

  Thanks - I went and got the installer for cloud creative yesterday and reinstalled, and now it works fine, so I guess I'm good for now. Don't know what, however caused.

• My husband can not access her hotmail account after changing his password. He put coordinates using the client about resetting password 3 times now and received no response. ?

  My husband email account has been hijacked and messages of spam sent to his contacts. He changed his password and regained the account, then it came all of a sudden with the message of your user name or password is incorrect. Despite repeated attempts to reset the password with the help of the customer we have failed. A link was sent to an old email that he cannot access, even if we asked to go to my email address. Please can someone help as urgentlt he needs his account and his list of contacts. Thanks Hazel

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=1

• BlackBerry smartphones can not see the music even after slipping / move

  Because I had the same problems with MM and MS, I tried the solution that I've seen several people post here and have done the following:

  On my BB Pearl

  Options > media card

  media card support: on

  encryption mode: no

  mass storage mode: on

  auto enable mass storage mode when connected: Yes

  Connected the phone to the pc using cable then slipped and dropped music to music for drive E: folder.

  Phone removed from the pc but the music, files are not always displayed to the top.

  If you have your connected device and browser, you can with Windows Explorer,
  Remove all bbthumb.dat files in the folder Music\.

  Unplug, then open the media application. And wait.

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  What exact version of After Effects you are trying to use? 13.7.1 is?

• HP Probok 450 G2 Bluetooth can not see my devices bt 8.1 Windows pro x 64

  Hi all!

  I have a problem!

  device: Hewlett Packard Probook 450 G2 (J4s43EA)

  operating system: windows 8.1 pro x 64

  Windows updates: the latest

  BIOS: last

  drivers: on the hp device driver site

  problem: I can see the BT icon near the clock, I turned on the visibility on the laptop and on my 2 android phones, but the pc can't see the phones and phones can not see the laptop.

  So I can't use bluetooth on probook g2 450!

  The Bt on the laptop is only research, but no results...

  What is the problem?

  OK I have solved my problem

  first:

  I uninstalled windows 8.1 pro x 64 and installed windows 7 x 64 home premium

  I have installed all windows updates and drivers of all Hp softpaq listed requible.

  But in the management of devices in bluetooth driver driver default winodws.

  HP softpaq don't ' found realtek bluetooth driver.

  Another problem has been the site of download of hp for this computer does ' t contain the last BT driver.

  Fortunately, I searched this in google:

  and found success!

  CLICK HERE TO DOWNLOAD

  I installed it.

  and this was the solution!

  After installation and reboot, there is another problem:

  the pairing is works, but don't see the send-accept option.

  There is a solution for this problem on the LENOVO site!

  Yes lenovo isn't a very helpful company like HP.

  Lenovo solution:

  CLICK HERE

  Since this all straight!

  Thanks lenovo, thanks google!

  Maybe this works in windows 8.1...

  Maybe...

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Import photos no problem can not see the photos on iPhone

  I upgraded my MacBook Pro to El Capitan.  Since moving from iPhoto to Photos (even before I updated the operating system) when I plug my iPhone 5 to import pictures in the selected library I do not see the photos appear in the import window so that I can select for imports.  I literally had to email it to myself, and then import it into the e-mail.  I work with different libraries within pictures, so I excluded it only love the library system.  Same result, can not see the photos.  Also, I have unplugged and replugged in and tried the other USB port to rule out hardware, while the Photos could force them to see the device as new, and that does not work either.  I tried something another user who had to open Image Capture to see if she could see all the pictures on my phone and it doesn't work, I found (theory was that opening would make Photos recognize as well).  However the Image Capture wouldn't add a USB scanner so I think it's not worthy of trust.  Photos only setting I have enabled is the automatic update to iCloud.  Otherwise, I don't know what another parameter to seek that could block it.

  When the phone is connected USB the phone reboot - many have found this will clear this problem

  LN

• You can not connect to your account because your father has blocked.

  Seems that your account has been banned
  You can not connect to your account because your father has blocked.

  
  
  E-mail address is removed from the privacy *.
  
  
  I can't account to enter the Inbox due to the closure and I do not have the father
  and please help as soon not to open mail and I can access works me it and
  I can access account to it, but the Inbox

  Hello

  I converted this thread in a guarantee of 1:1 for confidentiality purposes, please check the area of private message on this topic regarding the where you can meet with private aid. To check the private message, make sure that you are connected to Microsoft Community using the account that you have published this survey. After signing in, under your first post there are 2 tabs "answers all and Messages private.

  For users who have exactly the same problem, please post your concern in the link below, including the address affected so that we can help you. I will now be locking this thread.

  "Your account has been blocked. You cannot access your account because your parent has blocked it. »

  Kind regards
  Gerard G.

• Changing table - SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Hi all

  I am a newbie to Oracle and I am faced with the above error. Please see the below code snippets. Can someone please tell what I am doing wrong? Thank you in advance.

  Thank you

  CREATE TABLE ABC

  (

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  FIELD1 ACTIVATE THE NUMBER NOT NULL,

  FIELD2 ACTIVATE THE VARCHAR2 (8 BYTE) NOT NULL,

  CONSTRAINT JOB_PK PRIMARY KEY (ID)

  )

  ;

  CREATE TABLE XYZ

  (

  ACTIVATE THE NUMBER 4 R_ID NOT NULL,.

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  Column1 NUMBER (2.0) default 0.00,.

  Column2 NUMBER (2.0) default 0.00,.

  COLUMN3 NUMBER (2.0).

  NUMBER (2.0) TOTAL 0.00 default.

  CONSTRAINT TRIP_PAYMENT_PK PRIMARY KEY (ID)

  )

  ;

  create or replace trigger trigger1

  After Insert on XYZ

  for each line

  Declare

  number of newTotal;

  Start

  newTOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;

  setting a day of XYZ together Total = newTotal;

  end;

  Insert into ABC (1, 45, ' Demo');

  insertion in XYZ (1, 1, 12.50, 10.20 33,50, ");

  Error report:

  SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Try one before line

  create or replace trigger trigger1

  before inserting on XYZ

  for each line

  Start
  : new. TOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;
  end;

• Can not cancel my online account as it says I'm in a free 30-day trail however I was charged my subscription yesterday?

  Can not cancel my online account as it says I'm in a free 30-day trail however I was charged my subscription yesterday?

  Jasmine

  If you subscribed and the popup shows a window message trial, please see this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  If not, is it possible that you have subscribed using a adobe (email) ID and you use a different adobe for your trial period id?

  You can access this link to reach support call/chat: (please do not forget that you are connected to your Adobe account)

  Contact the customer service.

  Guinot