aspect ratio of false drawing in Windows media center

Similar Questions

• How can I set the format of Windows Media Center at 16:10 in other than the full screen?

  How can I set the format of Windows Media Center in Vista at 16:10 in other than the full screen? I use a screen as secondary display 1680x1050px.

  Hello, YPOC

  It is not possible to change the proportions for Media Center in windowed mode.

  The aspect ratio has been changed in Windows 7 and uses a format screen mode to windowed.

• Windows Media Center ehrecvr.ex APPCRASH

  Toshiba Qosmio G50 PQG55A-024020, Vista Ultimate 32 bit Service Pack 2.  Media Center does not display TV or DVD.  TV and DVD reception starts, but the two chassis jump, there is no noise, then an error message informs that the software is not installed or is damaged you, restart media center or computer.  These actions make no difference.

  States of Windows Media Center Receiver Service:

  Event name: APPCRASH
  App name: ehrecvr.exe
  App version: 6.0.6001.18000
  Time stamp: 47919381
  Exception code: c0000005
  Exception offset: 000379f9
  OS version: 6.0.6002.2.2.0.256.1

  Bucket ID: 635355073

  I downloaded and reinstalled the driver of Toshiba TV, nothing helps.

  Can help you, please.

  David McKeand

  The revenue situation after a few hours with the computer set up to show off the coast.

  I eventually followed to false by default enabled at startup to the top inside.  The system kept giving the speaker type tape recorder as a default instead of the Realtech High Definition Audio speaker.  I disabled the Sound Recorder Tap enclosure and everything is going well.

  Hope this helps someone else who has a similar problem.

  My thanks to two responses, I have not used msconfig for centuries.  We get the habit of kicking a computer around these days.  Oh for the days of MSDOS!

  David McKeand

• How to remove windows media center in the virus

  When I'm almost about to remove Center windows media, when I click on turn windows features, windows media center automatically pop. also, when I try to open any other program, Windows media center pop again. How can I remove this without it popping up when I click on something.

  Back up important data first, if you can. Then backup the registry. These two precautions.

  Then, if this has occurred there is little time, you can use System Restore to a point just before the association of the WMC has occurred.

  If this is not the case, see http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html and use file associations that are false. You probably need the patches .exe and .com (depending on what actually open WMC. For example, if all programs open WMC)

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Windows Media Center - why it cannot detect TV?

  I used Qosmioplayer and it detects the TV from my Sky Digibox very well signal. However, I would like to record TV with my laptop and when I try to set up the TV using Windows Media Center, it cannot detect anything. I tried every possible permutation and the manual does not give pointers...

  Why the Qosmiplayer works for the entrance to Sky TV, but not the media library?

  Please help it's driving me crazy!

  I assume you are using a lead of areal coaxial standard to connect to your sky box? If so, you need to know which way the sky is coming in the. To do this, use the Qomsio drive to search for channels and when it detects the signal from Sky, it will tell you which way it is passed on. Something like channel 36. OK, now you have this information, start the machine and go into Media Center. You must manually add this channel. As Media center works with the EPG, all channels such as the skyinput must be added.

  So, in the main menu, go to

  Settings > TV > Guide > add missing channels > add channel

  Now enter the channel name you want displayed when viewing. IE SKY.

  Now you enter the channel number 36 IE that you got the Qosmio engine. This will now be held on the next available channel. IE 6/7/8 etc. Everything do you now is go to the channel and it appears at the entrance to heaven.

  Hope this helps

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• Windows Media Center - reading Jumpy

  Hi all, hope you can help.

  When I try and play music through Windows Media Center (A100 with Home Premium) playback is very nervous.
  When I select the file directly from his file, it opens in Windows Media Player and plays perfectly.
  CPU usage seems fine.

  any advice to know where star will be greatly appreciated.

  Thank you

  NeFish

  Hello

  I searched a bit a found out that Vista Media Center supports clean audio codecs.
  Eventually he s an audio codec problem, who knows

  See this page:
  http://mediacenterexpert.blogspot.com/2006/07/Vista-Media-Center-decoder-utility.html

  This tool allows you to change the codec s; audio and video.

  In addition, you can try to update the audio driver also, but I m not very good if it will help, but it s worth a try!

• Take control of Windows Media Center

  I have a Pavilion P6000 series model p6700z tour running Windows 7.  I don't know what I did but now Windows Media Center took over all programs on the computer.  When I start the computer it opens in Windows Media Center, if I click on one that Windows Media Center opens and not the program.  I tried to do a system restore, and which opens again is the Windows Media Center. It's all the computer don't then stay on media center to Windows. Antivirus programs are Windows Media Center also.  All icons on the desktop are icons of Windows Media Center.  Can someone please instruct me on how to get my computer back to normal.  I have no backup discs and have not all the disks for the software that came with the computer.  I bought the HP computer online, but no records have been included.  I can't read my email so I have to find a way to pass messages.  Please help me!  I hope that's all the information you need.  Thank you for your time.

  Maria

  Maria, welcome to the forum.

  I think you have a virus.  This is a program that can help you.  I installed it to make sure it's safe.

  If the program in the link doesn't help, I suggest to make a recovery of the system using this guide for you help.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Windows media center m7350n: my computer refuses to get past start of windows blue screen

  Office refuses to make it past the windows blue screen with the words "starting windows" my Windows media center what do I do in order to get to start up again.  I did a few system recover test with these results. "

  Failed, test: test Shortself, Hd521-2w error code.  He also said that he would not recommend a system recovery.  This problem started one evening when my windows media center Office said that it had set a file.  How can I fix my desk as it is passed, the windows startup screen

  Skulldragon7

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC not start and I wanted to help.

  I wish I got good news for you, but I did not, as it sounds a bit like the hard drive has failed, what is to be expected if this PC XP - era still has the original drive.

  We have a few troubleshooting steps to test the drive but they only work on recent PC.

  What could work is by pressing ESC, or F1 or F2, when you start to see if one of these enter you a Setup screen, and if they do, choose to run the diagnostics from there to go to disk.

  If the drive has failed, there is bad news (sorry!) -in that HP long leaves Jersey recovery media for XP - era machines, so there is nothing you can order from HP to restore your PC to a new drive.

  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  And if not enough bad news, I guess that the hard drive in your XP machine has something known as an IDE interface.  You can tell by looking at the back of the car where the data cable connects.  If it is a large flat cable (about 2 inches wide) and there are a bunch of small pins where it connects on the disc, then it IS an IDE drive and those who are practically impossible to find, as the industry player opted for SATA disks making a few years back.

  Sorry... but it's time to think seriously to switch to a newer PC.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How to install Windows Media Center & decoder: Please help!

  I have a HP desktop computer. There not yet 2 years old, I have Windows Media Center (WMC) and I could watch TV very good about it until I'm the cable box. I simply plugged the cable into the Tower, no problem. Now that I have the decoder, I'm confused as to what's missing to make it work! It is said that the IR hardware & IR control cables are missing. What does that mean? Also, how far I will use? Do I have to use a universal? Oh, and it shows the channels that are supposed to be here (for example: it comes through that channel 53 is supposed to be MTV, but there is no video or sound).

  Thank you!!!

  -Lisa

  Set your tuner, PC TV channel 3 or 4 according to the cable box output channel.  The decoder is initially connect to the wall and the video output is connected to the PC.  Use the remote control for the set-top box to change channels.  If the PC is to drive the sound then you will also need to connect audio cables (red and white) from the cable box to the audio inputs of the TV tuner card.

• How can I use the FM tuner in Windows Media Center?

  Hello world.

  New on the thread.
  Found this site looking for answers to a problem I have. ?:|

  I received my Toshiba Satellite computer as a Christmas gift. I noticed that it is a cool FM tuner.

  I've also been playing with Windows Media Center.
  However, I can't understand how to operate the tuner inside the WMC FM...?

  I added the NXP FM tuner program to the "extras" on WMC, but instead to open the tuner inside the WMC, it just opens the separate program.

  Anyone know how I can use the FM tuner (or another maybe?) inside the WMC?

  Thank you! :)

  Hello

  I have no experience with this because my Satellite doesn't have an FM Tuner but nice talk on it you will find under
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138027

  If you find the final solution, it will be nice if you can describe an own experience with it. It may be useful to other people here.

  Bye and good luck!

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?