Windows Media Center ehrecvr.ex APPCRASH

Similar Questions

• Ehrecvr.exe.MUI corrupted in windows media center

  The last two days my computer was unable to shut down properly. It will get to the screen that says it stops but then actually turn off and I have to press and hold the power button. I got some tips to scan a full record to see if all the programs were blocking the process of closing, so I tried it and found that I had a corrupted file ehrecvr.exe.mui in Windows Media Center. I am running Windows Vista. Unfortunately, I don't have my original vista windows disc to replace the corrupted by a correct file.

  I'm not sure how to proceed from here. Any advice would be great!

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the complete error message you get?

  I suggest you follow these methods and see if it helps:

  Method 1:

   

  Try the following steps to register some of the important Media Center files and check if it helps.

  (a) click on the start menu, choose run and type cmd and press ENTER.

  (b) execute command regsvr32.exe atl.dll

  (c) run the command %windir%\ehome\ehrecvr.exe /unregServer

  (d) run the command %windir%\ehome\ehsched.exe /unregServer

  (e) run the command %windir%\ehome\ehrecvr.exe/service

  (f) run the command %windir%\ehome\ehsched.exe/service

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3:

  I suggest to perform the clean boot on the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• Netflix has stopped playing in Windows Media Center

  Until today, I had no content streaming watch Netflix on Windows Media Center problem (in Vista Home Premium). But now he stops "Netflix" red, one where content/license/buffering information are usually displayed on-screen. It is also very slow to get to this point. The site Web of Netflix movie player works fine, but not by the Media Center. Any help appreciated and thank you

  Here's what worked for me.

  1 close Media Center
  2 click on the start menu, choose run and type cmd
  3 run the command regsvr32.exe atl.dll
  4 run the command C:\WINDOWS\eHome\ehSched /unregServer
  5. run the command/service C:\WINDOWS\eHome\ehSched
  6 run the command C:\WINDOWS\eHome\ehRecvr /unregServer
  7. run the command/service C:\WINDOWS\eHome\ehRecvr
  8 run the command C:\WINDOWS\eHome\ehRec.exe /unregServer
  9. run the command C:\WINDOWS\eHome\ehRec.exe/regserver
  10. run the command C:\WINDOWS\eHome\ehmsas.exe /unregServer
  11. run the command C:\WINDOWS\eHome\ehmsas.exe/regserver
  12 reboot Vista
  13 restart Media Center

  From:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• pinterest access by windows media center

  before March 21, 2011 I could access pinterest in windows media center. After 3/21, I get a message there is a during extraction of data problem. my other sites on media center have no pinterest only problem. were there an update that should fix it?

  Hello

  Try these steps and check.
  a. close Media Center.
  b. click on start and type cmd into the search bar and press to enter.
  Type the following commands one by one and press ENTER.

  Regsvr32.exe atl.dll
  C:\WINDOWS\eHome\ehSched /unregServer
  C:\WINDOWS\eHome\ehSched/service
  C:\WINDOWS\eHome\ehRecvr /unregServer
  C:\WINDOWS\eHome\ehRecvr/service
  C:\WINDOWS\eHome\ehRec.exe /unregServer
  C:\WINDOWS\eHome\ehRec.exe/regserver
  C:\WINDOWS\eHome\ehmsas.exe /unregServer
  C:\WINDOWS\eHome\ehmsas.exe/regserver

  c. restart your computer and check.

  See also:
  Known issues and limitations of Netflix on Windows Media Center for Windows Vista
  http://support.Microsoft.com/kb/972496

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Window Media Center

  When I try to use Windows Media Center, I get the error "windows has stopped working" but still my system is automatically updated.  Help please.  I also had the "APPCRASH" error message

  Hello ejl711,

  Thanks for posting on the Microsoft answers Forum.

  The error, "Media Center has stopped working" can occur if the Windows Media Center data store is corrupted.

  Click the Start button, and in the start search box type the following command: % systemdrive%\programdata\microsoft\ehome, and then press the Enter key.
  Now, locate the following file, file mcepg1-5-0. It's an a db or data base file. Right-click on the file and delete it.

  Restart Windows Media Center. This will allow now allows you to configure Windows 7 Media Center from scratch.

  If this does not help, it could be a conflict with the 3rd party software or programs.   A clean boot may help you determine what is in conflict.
  You can click on the following article to help implementing a clean boot.

  KB Article ID: 929135 -how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If please reply back and let us know if it helped to solve your problem as it may help others. If you still need assistance, please let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center crashes when I click on "Save" or "Series Record" in the Guide

  I had a problem with MC of Win 7 (ehrecvr and ehsched services does not) that has been resolved, EXCEPT that whenever I hit "Record" or "Series Record" in the Guide, MC crashes. upon restart, it shows no record for the entry of guide. Any ideas? Thanks for your help!

  Log name: Application

  Source: Windows Error Reporting

  Date: 2010-07-08 10:57:36

  Event ID: 1001

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer: DellStudio

  Description:

  Bucket of error, type 0

  Event name: CLR20r3

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: ehshell.exe

  P2: 6.1.7600.16385

  P3: 4a5bd053

  P4: mcstore

  P5: 6.1.0.0

  P6: 4a5bda1e

  P7: 87D

  P8: eb

  P9: K00FQ3SX1BBMZSVVMZ43XMPES0XM1TGN

  P10:

  Hello
  
  You will remember to do recent changes on your computer before this problem?
  Disabling Mcupdate.exe scheduled task has allowed little to resolve this issue. You can also try turning it off and check for the issue.
  Method 1: Disabling Mcupdate.exe scheduled task.
  1. click on start.
  2. in the search box, type Task Scheduler.
  3. under programs, click Task Scheduler.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  4. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows and then click on Media Center.
  5. in the details pane, right-click right mcupdate and then click on disable.
  
  Method 2: Rebuild the Media Center data store and see if that can solve the problem. To do this, follow these steps:
  
  a. exit any running instance of Windows Media Center.
  b. remove the mcepg2 - 0.db file. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mcepg2-0.DB
  To remove the file, follow these steps:
  i. click on start, type % systemdrive%\programdata\microsoft\ehome, and then press ENTER.
  II. in the details, click pane right mcepg2 - 0.db and then click on remove.
  III. click Yes to confirm that you want to move the file mcepg2 - 0.db to the trash.
  This file will be automatically created once you restart windows media center.
  I hope this helps.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "windows media center a work stoppage".

  updated iphone 4, connected to itune with window 7 and this coming "windows media center has stop working" immediately "Troubleshoot so-called," device recovery mode mobile apple "can not find a driver..." If you know manufacvturer ask furthjer solution

  Software Apple works well with apple products.

  'itunes for windows' often causes a lot of problems and there is a lot of software for windows that does the same thing as itunes without the widows of problems with itunes.

  Follow the steps below to see if re-register components of the media centre will help to resolve the problem.

  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".

  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  It worked?

• crashing Windows media center at the start of video library

  Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

  Windows 7 SP1 32 bit
  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

  HI player67,

  I suggest you follow the steps below

  Method: 1

  Enable and disable Windows Media Center. To do this, follow the steps below:

  a. Click Start, click Control Panel and then double-click programs and features.

  b. click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. extend the functionality of media

  d. turn off Windows Media Center of the box, and then click ok

  e. follow the same steps as above, this time place a check mark against the Windows Media Center box

  f. click Ok, and then restart the computer

  Method: 2

  Perform a check of the system files; read the following article to run the System File Check

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Windows Media Center Setup error: setup parameters for your region could not be determined.

  original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

  windows vista operating

  Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

  The configuration settings for your region could not be determined.  Restart your computer to solve.

  Things I've done:

  restarted computer several times

  run system restore

  disabled the norton 360 firewall settings

  has ran norton pc tune up

  still can't media center to work Please HELP

  Thank you

  Hello

  The problem may occur if the Windows Media Center components are not registered correctly.

  I suggest to try the following steps to solve the problem.

  The registry Windows Media Center components

  =========================

  1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

  2 type the following commands, press ENTER after each line.

  REGSVR32 ATL. DLL

  CD C:\WINDOWS\EHOME

  EHSCHED /UNREGSERVER

  EHSCHED/SERVICE

  EHRECVR /UNREGSERVER

  EHRECVR/SERVICE

  EHREC. /UNREGSERVER EXE

  EHREC. EXE/REGSERVER

  EHMSAS. /UNREGSERVER EXE

  EHMSAS. EXE/REGSERVER

  We can open Windows Media Center now?

  It will be useful.

• Windows Media Center has stopped to display images. I am running windows 7 64 bit and the photo folders are visible but empty.

  I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great.  Help

  Hello

  1 have you ever done any recent hardware or change the software on the computer before this problem?

  2. the functions of Windows Media Center are intact?

   

  Method 1:

  First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

  Method 2:

  Turn off the feature and reactivate it:

  a. click Start, type appwiz.cpl and press ENTER.

  b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.

  c. find the Windows Media Center and uncheck the option.

  d. restart the computer.

  e. navigate back to the same location and activate the option back.

  Method 3:

  Refer to this link to learn more about,

  See the photos and videos in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

  To troubleshoot issues with images and videos in Media Center show,

  Working with pictures in Windows Media Center: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Method 4:

  Reregister the following files.

  a. close Windows Media Center.

  b. click the Start menu, type cmd.

  c. right-click on the cmd option in the start menu and select run as administrator.

  d. type in the commands one by one by and press ENTER after each one.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  e. restart the computer.

  f. restart Windows Media Player and see if the problem persists.

  I hope this helps!

• Updated my CPU (Windows 7 64-bit) and DRM rights do not seem to work for Windows Media Center

  After the upgrade, only the specific movie channels in Media center play is more (Record) after approximately 6 seconds.

  (Do not forget that there is a function of pause/forward who s equivalent to check-in for DRM)

  Get a message from copying prohibited.

  Looks like the upgrade of the processor messed up somehow DRM rights for this machine, to the point where no films previously saved are playable AND NO NEW FILMS can be registered and enrolled in some way a Canadian Film Channel. (Bell Expressvu - channels 300 + Movie Network)

  As wired http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&id=C00D2798

  Delete the contents of the file DRM (archive first)

  c:/program data/microsoft/windows/drm.

  Restarted...

  Partial contents of the folder have been recreated...

  Problem remains.

  Can Watch all the channels, but those who are 'Movie channels' stop after about 6 to 10 seconds and display a Message of copying prohibited.
  The broadcaster has banned this content to be copied. You can only read this content on the same computer on which it was recorded.
  Note: I don't like on my OLD recorded movies... In fact already deleted... I just want to be able to watch the movie channels and save NEW ones...

  Well after 4 days of effort + a fix was finally discovered...

  (1) exit Windows Media Center is running.

  (2) open a cmd prompt - run as administrator.

  (3) run the following commands one at a time:

  Code:

  net stop ehrecvr CD %programdata%\Microsoft\PlayReady del *.hds rmdir /s Cache CD %programdata%\Microsoft\ehome del *.hds rmdir /s Cache net start ehrecvr

  (4) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

  It was the only solution to Playready update succeed to in Windows Media Center.
  Playback worked immediately without any loss overall upward or configuration information...

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It