Aspire 5100 restore options?

Similar Questions

• Aspire 5100

  Cover of my acer Aspire 5100 will not open

  You the best option at this point is to contact your local service and support for assistance.
  Acer Service & support

• Make default to search for in the homepage after restore option in google session

  Hello. Recently, I installed yahoo messenger but later it uninstalled. After that make me this problem that my default search in the fox homepage has been changed to yahoo instead of google. Talking about the search box located in the Restore Options page previous session. I want to know how to change this back to google. Thanks in advance.

  Hi viggiavu

  try the excellent SearchReset module , the add-on uninstalls after doing the "job."

  Thank you

• Failed to read the serial number or of SNIDS on label Aspire 5100.

  Hello

  I use the search function but did not find a question quite like this - little surprising?

  A family member gave me a laptop Aspire 5100 that no power, fear of the system board.  Not seem to receive a wave of newer computers with bad cards system.  The label on the back of the laptop with the number of series & NSID is faded & I can't do all the numbers.

  Since I will very probably be pulling apart anyway is everywhere, maybe inside, where the serial number or the SNID could be printed?

  The manual lists this laptop to use ATI Radeon® Xpress 1100 or Xpress1200 chipset - I can't tell the difference between the two.  All system boards for sale seem to only list Xpress 1100 chipset that will probably work but a little clarification on Xpress 1100 vs 1200 would be nice.

  Thank you

  Can try it analyzes, you'd be surprised to know that can capture even a little expensive HP scanner/printer.

• Acer Aspire 5100 Windows 8.1 problems (64-bit)

  Hello Acer users,.

  my mother has an Acer Aspire 5100 and is happy with it so far. I installed an SSD hard drive and Windows 64-bit from 8.1 to it (fresh). Now, she is very happy that the machine is very fast. Allthough there are new problems that accompanies the installation and I'm not happy with them. They are as follows (all drivers related questions I guess, no driver in Windows update or on Acer site):

  1 - memory card reader does not work and does not appear in the Explorer. Device manager shows 3 x peripheral problem which are the memory card reader. Which brand is?

  2 - WIFI does not work (says network adapter), have not yet tried to download and install the drivers from the website of Atheros, will try this next time I visit him. Poster 1 x peripheral problem device manager which I guess is the WIFI because the machine can access internet through wired adapter.

  3 - display is fixed (cannot be changed) at a resolution of 1024 x 768 and it can do better, but can not be changed. Downloaded and installed Catalys control center, but this has changed a lot and I do not see anywhere to change the resolution from there. Only several screens etc.

  4 - adapter displays in the Device Manager to 200M and it should be Ati Radeon Xpress 1100?

  But other than these problems, Windows 64-bit of 8.1 works great and especially with the SSD is very fast. And can recommend to you all =)

  Well, if you can help me on this issue. I guess that Acer can not make drivers before they get the manufacturers driver.

  -Ele

  -CUP-

• I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work.

  Acer Orbicam has stopped working

  Hi, I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work. Can someone help me?

  Hello

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool and check if it helps:

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to install the latest drivers for webcam on the Acer support site and check if it works.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=44

  Note: Be sure to select the operating system like Windows XP before downloading the drivers.

  You can also check with the Acer support for all known hardware related issue:

  http://support.Acer.com/us/en/default.aspx

• BlackBerry Q10 BlackBerry link 'Restore' option is grayed out

  I ran the last 10 BlackBerry OS Update on Q10 BlackBerry to my wife last night. It seems to work correctly. However, when my wife went to use his phone this morning, it is in the configuration screen and all its information has been lost.

  Needless to say, she is very angry with me.

  She tried to do a "restore" BlackBerry connection after installation on its Q10, but the "restoration" option is grayed out.

  Help, please!

  No phone is under settings. He appears at the bottom of the screen.

  I had to uninstall BlackBerry link and reinstall it. Then it worked.

  BlackBerry link has a long way to go!

• Windows7 installed in Acer Aspire 5100 laptop. Need Omnicam discs and software (which works)

  I have Windows7 installed in Acer Aspire 5100 laptop computer. It has 4 GB of ram installed and 32 GB as memorycard W/Redi-Boost. Sytem visas ready and works extremely well the 64-bit Win7. Only one item would not install the internal Omnicam which is mounted above the screen. This is how my mother-in-law is considering the and talk to grandchildren back in America. Like today, she's too old to travel.

  David S.

  Chiangmai, Thailand:* address email is removed from the privacy *

  Have you tried here?

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=44

• Operating system XP Acer aspire 5100, Seagate 320 GB external hard drive:

  When I try to save on my seagate mass storage disc, it tells me to have a cd ready to the (all my computer) option, but not in the partial backup option, so after 7 hours later because my seagate 320 GB has so much data on it and it saves it as, the right backup program bounces on without option to insert a cd in the drive.  So now I'm in another hour 7 delima. Is there a way to find th drivers to put on a cd for the function f6 on my restore acer 5100 option, or a fix for this problem windows so I can put all this time?

  I have not found my answer in the forum can u tell me how or where windows put this if I can copy the drivers on a cd it can read the f6 function?

  This thread was created in the hardware forum and drivers.  The moderation of Microsoft answers team has moved on the forum of the Performance and maintenance.  Thank you.

• Undo system restore option is failed upwards in the system restore menu.

  Original title: Undo system restore?

  My sound doesn't work on my windows XPS, I did a system restore, but not to the point of restoration before the sounds stopped working because it didn't go that far back. but now, I want to cancel the system restore because it has messed up my computer, but undo system restore is not an option in the menu of system restore. What should I do?

  Hello

  1. were you running safe mode system restore?

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  I suggest you to refer the link below which will help you put the sound on your computer.

  No sound: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

  Hope this information is useful.

• I have the product code on the back of my Acer Aspire 5100 but I lost the CD to reinstall Vista.

  I had problems with my laptop and it wiped off, but then I couldn't find the installation disc. Can I download Vista Online and use the product key on my laptop?

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...
  Acer is Alt + F10

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• ActiveSync let me backup once, then no more backup/restore option

  Hello!

  I use ActiveSync 4.5 and WinXP S3, but it is also on the SP2. I have a HTC P3300 with Windows Mobile 6.

  The first time I plugged on the desktop computer, he offered to perform a backup and created a. STG file. The thing is, after that it is synchronized with the default options, which included crushing 0 Outlook 2007 contacts in my contacts 1700 in the HTC. I try now to get back them with the STG file but whenever I connect my HTC on the desktop, the option "Backup/restore" disappears on the menu 'options', which is kind of weird because if I disconnect the device I see the option (grayed out, however).

  Any ideas would be very appreciated :(

  Thank you in advance,

  K.

  .... I've been there and done that. Arrgh!

  So, here is a link to the site XDA... phone mobile site btw. There is a STGviewer that should allow you to open the file and remove what you need.

  http://Forum.xda-developers.com/showthread.php?t=226110

  Make a copy of this file before playing with it!

  I hope this helps.

  Mark <> Microsoft Partner

• Restore options backup on internet

  I didn't backup my data from the computer and the computer works properly with windows 7. It shows a consignment at the bottem right corner of my desktop windows 7 build 7600 this copy of Windows is not genuine. I don't want to take any chances with my data and want to save it on the internet because I will be accessible anywhere data I need. Please expain that if I save it to my email account it will download fee or not? If she then will be how charges will apply.

  Hello

  1. you try to perform a full backup of the system?

  2. What is the size of the data you are trying to backup?

  Data download charges up to will depend on the ISP (ISP).

  In Windows 7, you can back up the data to another disk or DVD. And if you use the Professional Edition or ultimate edition of Windows 7, you will also have the option to back up your files on a network.

  See the following Microsoft article and check.

  Backup and restore: http://windows.microsoft.com/en-IN/windows7/products/features/backup-and-restore

• Power and system restore options will not start

  Hello

  Yesterday I used system restore to restore my computer from a restore point when I had problems burning files to disk. The restoration seems to go smoothly. However, now I can't access power from the taskbar options (I use a laptop) or the control panel. When I click the icon, nothing happens. So, I tried to open the system to always restore in mind to find a different restore point. However, when I right click on "Computer" in the start menu and click on 'Properties', the same thing happens: nothing. It's the same, click "Recovery" in the control panel.
  Therefore, I entered "rstrui.exe" from the command prompt and finally got to come system restore window. However, there are an error message that says:
  "System restore is not seem to work correctly on this system." An element of Volume Shadow Copy Service has encountered an unexpected error. Check the log of events applications for more information. (0 x 80042302)
  So I typed "Services.msc" in the start menu and clicked on it, but yet again, nothing happens.
  Right now I'm running a scan with Malwarebytes malware, after which I intend to try to do a restore of the system in safe mode, but I fear that it won't work because I already tried to start safe mode power options and it did not work (that was before I realized the system restore was not functional).
  Can someone please? Thank you.

  Edit: both pis. I was able to fix the problem with sfc/scannow from an elevated command prompt. There were files corrupt system that have been properly repaired. Now the system restore works, but it is no longer necessary.

  Hello

  I'm glad to know that you have solved the problem of system restore. I really appreciate your efforts to address this problem.

  Able to get to power options are you working now?

  If you are still having the problem with power options, I suggest the following methods and check if it helps to solve the problem.

  Method 1: on troubleshooting in Windows 7 power management http://support.Microsoft.com/kb/980869

  Method 2: when you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel http://support.Microsoft.com/kb/935799

  Registry warning: TThis section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Method 3: power options do not work correctly in Windows 7 or in Windows Server 2008 R2 when you use Group Policy to configure the power management in a field to download and install the Microsoft Fixit mentioned in the article. http://support.Microsoft.com/kb/2514376

  We can also refer to the following article and follow the steps there.

  Windows 7 is not going to sleep: http://support.Microsoft.com/kb/976877  

• "Custom" Restore option is no longer in R &amp; R?

  Pending my last thinkpad to deliver, I read a post on NBR , which claimed that the "custom" option restore is therefore more in Rescue and Recovery for new thinkpads with partitions Q and S.

  Now that I got my new thinkpad I see that indeed the "custom" option no longer exists. I see a full factory restore is possible, as well as all trial crapware [soft], whole Thinkvantage suite of utilities, etc.

  Someone please tell me I'm wrong. Is it really not possible to do a "custom" factory restore more? Combined with the disappearance of the system of updating I won't buy liked products Lenovo as these 2 utilities have been TREMENDOUS gains in time for me, and one part huge reason why I recommended it Lenovo to others.

  It is true, I'm sorry to say see post of bloo here.