Aspire 722-0473 disk Replacemnet_Win7 HARD install not see HDD... Despite...

Similar Questions

• How to install XP on Satellite P200-16 X PSPB6E-XP can not see HDD

  Hello!
  Well, I've seen and downloaded all the drivers for my laptop P200 - 16 X (PSPB6E), but... When I run the setup of Windows XP CD, it may not see the SATA drives that Vista can only do. I saw on Internet forums that we have to find the driver for the SATA controller (then press F6 on XP install...) etc... but it's too technical for me...

  Y at - it a "simple way" to install XP on this laptop?

  Thanxx a lot!
  Sincerely,
  Stef

  Post edited by: p200-16x_user

  Hello

  I think I have the solution
  You must first install the Intel Matrix storage Manager before you continue the installation of XP Setup!

  You can find the Intel Matrix storage Manager here:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Please come back and you results reports
  I hope I could help

  Good bye

• Satellite A110 installs recovery disk but HARD DRIVE not displayed

  Hi guys,.

  After searching the net, I finally found a forum in which I hope you can help me.
  I tried to search this forum for an answer but couldn't find him.

  I have a toshiba satellite a110-159, who, after a setback, did not start.
  CHKDSK discovered many problems when I plugged the hard drive to another pc, but the laptop could not even boot from the disc.

  Anyway, I copied the most important data and back up the disk in the laptop. with product recovery center of disks that I was able to reinstall windows xp installation support, but after the first reboot, the laptopt did not find the hard drive, it is not displayed in the bios.

  strange, although the recovery disks installed... anyone know how REList the hard drive in the bios? It has been listed here before reinstalling windows xp mc...:(donc c'est comme il a fait quelque chose avec le bios ou presque.)

  hope you guys know what is the problem with this one.
  thnx in advance!

  Edit:
  the drive is accessible when it is placed in another system of system or desktop with converter and copy and works very well.

  What makes you look very risky!
  You are lucky that your laptop still works...

  I would not recommend doing so. If you want to set the BIOS to factory settings then set the defaults in the BIOS settings.

  In any case thanks for your comments

• Aspire AS5742-6682 disk size hard max?

  Hello

  Just bought an Acer Aspire AS5742-6682 and would like to know what is the biggest hard drive I can stuff into it.  It currently has OEM 320, but I would like to get the bigger disk into it as possible.

  See you soon!

  Robbie

  Any capacity HARD drive should work fine, as long as he is physically than a standard notebook size HDD.

• Second HARD drive not recognized by windows 8 but is recognized by the sata bios

  Second disk sata hard of not appearing is not on my computer and disk management. However, the hard drive is displayed in the bios. I am running windows 8 and the hard drive has been used in another cpu with linux installed on it, I want to format the hard drive and use it to store data.

  Thanks, Thomas

  Hello

  Yes, it should work... I didn't know that you were able to do...

  If you can remove the entire partitions... If you can reformat it to NTFS on Linux, you do too much, or just wait and do in Windows.

  Parted Magic is actually a program Linux incidentally...

• Hard drive not detected on Satellite Pro 4270

  I took out the 2 "5 HDD of my SP4270 to transfer data to my PC via an EIDE 5 3" 5-2"adapter, HD has been detected by the bios of my PC and the transfer was successful.
  Then I reinserted the Bay 2 "5 for laptop from my hard drive, but I get the message"Insert system disk in drive.".
  I checked the boot priority in the setup and it shows a HDD-> CD-> sequence FDD.
  In the DISKS to bios section, I see HDD = IDE (1F0H/IRQ14) primary.

  I extracted and reinsert the disc again, hard, but without result.
  What could be the problem?

  Hello

  It is not easy to say what is happening here. Please when you pull it out HARD drive remove the connection of the power supply and the battery first.

  Check all the pins on the HARD drive. I hope they are all okay.
  Try to enter the HARD disk using the disk boot or applications in MS-DOS mode. If there is no success there is a hardware problem.

• External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

  External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

  Hello Sharan,

  These links may help:

  http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

  http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Re: Satellite L555 11 L: BIOS indicates the drive HARD is not installed, BOOT Manager said HDD

  Hello!

  I had problems with my Toshiba laptop.

  When I tried to boot my system after a regular stop it does not recognize the HARD drive more.
  BIOS indicates the drive HARD is not installed, the said BOOT Disk Manager failed.

  Tried the HARD drive to a desktop computer and it works fine. This is not a new HDD SATA is recognized.
  However, the boot sequence itself and other functions seem to be ok.

  Who is wrong?
  The laptop is 1.5 years old and didn't have any problems before.

  Any help is appreciated ;)

  Hello

  It seems that the HARD drive is damaged.
  In your case the drive HARD test would be recommended.

  Download the software called Drive Fitness Test. It the free tool that can be used for the test of HARD drive.
  If the HARD drive is not detected or you will get errors, then it means that you HARD drive needs to be replaced and OS need to be installed again.

• My WD external HARD disk usb device does not appear in the computer on XP and Win7, but appears in the system tray?

  I have 2 GB external usb external hard drive that appears in the XP and Win7 system tray, but not in my computer/workstation?

  When I go to the management of computer disk/storage/management - is not there in XP but it is for Win7.

  How to work various PC and diferent OS?

  If you view the contents of the external drive, I think that the first folder contains a USB driver that you need to install to run properly, if you cannot view the contents of drive I'm sure you can download the driver for Western Digital. I think that the work of readers well on Windows 7 installs with 3 USB ports, but drivers are needed for USB 2.

• I can't install the second disk sata hard

  I have a problem when install the second disk sata hard
  I bought a new one 500 GB and I installed windows xp sp3
  and it works well I plugged in SATA 0 port
  When I want to install a second sata hard disk 320 on sata 1
  and it has an important data, windows will reboot, and do
  blue screen sometimes 'NTFS.sys"or"SCSIPORT.sys.
  and it is written "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
  If someone help me what should I do or there is no FIX for this problem.

  in the BIOS I have regcognized both hard drivers:
  IDE pri master 500 GB
  PRI IDE slave 320
  Second master IDE-
  Second slave IDE-
  PORT SATA - 0
  SATA 1 - PORT

  I plugged the IDE 2 cd-rom

  ----------
  Specification of the device:
  Windows xp sp3
  card mother gigabyte 848P
  Intel ICH5
  Intel 8I848p775-g
  Celeron D Socket 775

  You said that the hard drives are sata but your bios recognizes them as IDE depending on your position. You might have to set your bios to operate in sata mode or enable AHCI of have recognized them as sata. Regarding the error you get, look in the system BIOS to boot from hard disk command menu. This is different from the command menu of usual starting where you choose each time you start a cd ROM or hard drive ect... The parameter that I refer to determine which hard drive of your computer starts on the first. Change to the primary master 500 GB disk > save your settings and restart your computer. Even if one is defined as main and the other slave is not serious. Some bios have the ability to choose what hard drive to boot from. In other words, it is adjustable to start first on the slave drive.

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• R50E installed new hard drive, laptop does not see...

  Hello

  Just installed a new hard drive, one old man went beyond repair, the disc is out of the package, I format, partition, but the laptop does not see...

  I wonder how I can do... I do not have the recovery disks, but I can get them if it will solve the problem

  Thks

  Thks for yr reply

  But the problem is solved, it was a hard drive defective, even if she was new out of the package, returned to the shop, tested found inoperative, replaced by another that everyone ok

  concerning

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• If I have not access to the disk partition hard base would impact on the installation of a complete operating system?

  Original title: TPG Server petition.

  I wanted to know if I di not actually have access to the disk partition hard base would impact on the installation of a complete operating system of Windows 7 Home Premium 64-bit? Instead of having a computer with a complete installation of windows mine came with versions of WinPE OEM, NT and MCE. The GPT partition server that I can see is protected. Partial operating systems seem to be installed on network disk Volumes. I think that what I have to do down the disk hard real all delete and start again but I'm having a problem to see what is all about the drive through programs and remove what I find. He also seems to have a certain type of script hidden BIOS more wrinkles to retail and canceling all decisions on versions of the oem .cfg files. She configures and installs the server instead of windows 7 Home Premium 64 bit server software. The installation gives the highest administrative authority to the network administrators who I don't know and have never met and to manage my personal laptop. It creates a serious problem when I want to use my computer for one purpose and that some people I don't know and have never met want me to use my computer for something else.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.