R50E installed new hard drive, laptop does not see...

Similar Questions

• new hard drive, Wireless does not

  I had to install a new hard drive and reinstall windows 7 on my Pavilion dv6. I downloaded the drivers for the network card and you can get on the internet with wire connected. When I installed the drivers wireless I get compatibility box that says drivers have not installed correctly. Controller of net work shows no driver installed. Any help would be great...  I am running windows 7

  You are the very welcome.

  You need this driver for the PCI device.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102202-1&cc=us&DLC=en&LC=en&OS=4063&product=5218502&sw_lang=

• A clean install of Vista Home on new hard drive SATA does not end

  MAJOR problems, do a clean install of Windows Vista Home Premium 32 bit on a SATA hard drive. It takes 2 days for installation and at the end he hangs and won't start not even once again. Help!

  * original title - the IMPORTANT issues having a clean installation of Windows Vista Home Premium 32 bit on a hard dur.* of SATA

  Hi Zombie_206,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-install-problems/d3e9d959-db3e-44e9-8543-b730d7cf4399

  I hope this helps!

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my graphics driver laptop does not work on the 8.1 window when I go from window to window 8.1 8

  When I update the 8 to 8.1 window window my graphics driver laptop does not work.

  I am not able to see vedio and not able to change the brightness of the screen...

  I download and install the graphics driver for window 8.1 from your Web site, but it also does not work...

  When I start the laptop, the error message is showed that no amd graphics driver not located or does not properly.

  my laptop model No. is n003tx in this model 1 GB amd radeon 8670M graphics driver is attached...

  Please help me as soon as possible.

  Hi Kushal

  Sorry to hear, by me, these two things do not seem to be connected. However, we can do many things...

  ----------

  1. If you can, restore the system to the date before the problems. It should solve the problems.

  ----------

  2 uninstalling drivers AMD and Cattalyst driver. Restart the computer and update of HP SAssistent, it is a friend more important your computer.

  ----------

  3. If you had already done so, download and run your computer support page chipset drivers - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5422962#N222

  You need drivers chipset right because it allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  -----------

  4 Please, thry hard reset - procedure

  http://support.HP.com/us-en/document/c01684768

  and that win refresh

  http://support.HP.com/us-en/document/c03538721

  ------------------

  I don't know that he should fix the DIF. Please, let me know, by my side, I wish you good luck and good luck!

• Just installed new hard drive 1 TB

  Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

  http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

  Take a look in disk management.

  See you soon. Mick Murphy - Microsoft partner

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• laptop does not see the disk of works 9

  I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
  My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
  It works on my desktop which has windows xp system opp on him.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.

  See you soon. Mick Murphy - Microsoft partner

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry

• XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

  I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

  Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

  Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

  Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

  I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

  Hi LG1382,

  You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

• Installed the new hard drive - now "OS not found"

  Hi, I recently installed a new hard drive in my laptop because the old hard drive was dead. So, I installed the hard drive and I am now installing the operating system using the Dell disk I received with my laptop. This is for the 32-bit window Vista and it says it should be used for re-installation of Vista. It was in a sealed envelope - so it has never been used.

  When I start the laptop and insert the disc, it just says: operating system not found.  I made sure the cd drive is the first in the startup list.  I also put the drive into another laptop and copied the files on a USB key.  Then tried to install it on the USB. No luck.

  I have run the system diagnostics, and it says that my hard drive and cd drive are recognized and functioning.

  The dell cd drive is not bootable?  Thanks in advance for your help.

  I was able to fix this on my own. It turns out that one of the files has been altered I discovered once I was finally able to get it to boot from a USB device.  I found the one window Vista installation disk other that I have with another computer laptop and used that. Worked well.

• Installed new hard drive on laptop with Windows 7 can install Windows XP on external hard drive and plug it into USB?

  Original title: Win7 Pro + HD Ext different OS
  I just installed a new hard drive in my laptop with Windows 7 Pro 64 bit.
  Would it not be possible to install WIn XP or Win 98 + older software (Win 98 or XP) on an external hard drive, then plug it into USB, laptop, in order to run old programs of 16-32 bit?

  It would be best to run Windows 98 or XP in a Virtual Machine, if you need to run older programs.

  You can use a free software such as Oracle VirtualBox or VMware Player:

  Sunny Random Ramblings: installation of Windows 98 in Virtual Box

• installed the new hard drive, but could not find the original CD.

  I have a hp w6243p desktop computer.  I installed a new hard drive but cannot find my original driver cd so I ordered one online, I have nothing on my computer, please help

  Hello

  Driver for what?

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

  Hello

  I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

  I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

  When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

  The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

  LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

  I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

  Any ideas?

  P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

  Hello skinandbones13

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario