Re: Satellite L555 11 L: BIOS indicates the drive HARD is not installed, BOOT Manager said HDD

Similar Questions

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• The driver updates are not installed automatically when detected by windows update

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Drivers and other optional updates are not installed automatically. According to "to install drivers and other optional updates" in the following link, "to install optional updates, you need to review and then select them from the list of updates that Windows finds for your computer. Optional updates are not installed automatically. " http://Windows.Microsoft.com/en-US/Windows7/Install-Windows-Updates

• Try to install the driver, but will not install correctly, ArcSoft Photolmpression 6.

  Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
  Thanks to all who can help.
  Concerning
  TREV

  I think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.

  You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.

  BTW, the title line of your post is not really applicable to your question/problem.

• WIRELESS MOUSE NOT WORKING - MSG I GET: Windows Update configured to never install drivers. The driver updates are not installed automatically when detected by Windows updates.

  My laptop does not recognize my wireless mouse more and this is the msg I get when I solve the problem.  I uninstalled Windows 6.1 and installed an update of Windows which was supposed to solve this exact problem, including the problem that started the same thing of my laptop does not start correctly.  It takes a long time to come - fans and all start, but take apx 4-5 min of kick.  Every once and a while I get all workers through troubleshooting or by doing a restore - then as soon as you close it down he 'forgets' that you did and the problem is there once again. Help!  FYI I AM COMPLETE COMPUTER MODEL and do NOT know my way and a lot of terms, so be nice and treat me like a child!  TYIA!

  Hello

  1. What is the brand and model of the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Pease follow the steps from the link to configure windows update to install the drivers.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

• The new update will not install.

  The new update will not install. (it is said there is a problem with a file called spill.aex)...

  I tried to delete after effects to reinstall, but who doesn't either so now I can't the legacy at all.

  THE FIXED!

  I changed the name of the card effects that included the broken file. (still cannot delete the file itself :/ but at least after effects works again!)

• After installing the new drive HARD impossible to install OS on Satellite

  Hello

  I had to buy a new hard drive as old one was damage... the bios recognizes the new hard drive... but now provided by toshiba recovery cd does not and can not reinstall the system... I chose the boot from CD/DVD, but it does not start and continues to try to pre-seed from the internet and keep telling that no name of boot file received

  What can I do?

  Post edited by: Rodsin

  I really put t know what is happening here, but it will be interesting to know what Satellite phone you have.

  Try it please press the C key after turning on the unit. Keep it down for a few seconds. In this way the CD/DVD drive must be primary.

• Satellite M40: message: can not play because the DVD decoder is not installed

  not serious... I am back... I did a little reading and tried to read another cd in the drive and the message came to say "can't play because the dvd decoder is not installed, so I guess that's the problem because I have a recovery * DVD *.» Anyone know where I can find a dvd for a Satellite M40 decoder?

  > can't play because the dvd decoder is not installed
  This message appears if you want to play DVD movies with an application like Windows Media Player that has no (plug-in) installed DVD decoder.
  Usually the DVD can be played with special programs like WinDVD or PowerDVD for example!

  But this DVD decoder has nothing to do with the Toshiba Recovery DVD and the fact your new DVD Player cannot read the recovery DVDs.

• Satellite L670D - issue of recovery on the new HARD drive

  Hi all.

  I actually sent this support Toshiba has a few days ago, but still have received no response and thought I would try this forum.

  That's the problem; the hard drive of my laptop is a failure, I had warnings to create a backup and replace the drive hard as soon as possible. I have done this and have mounted with success the computer with a new brand Hitachi 500 GB hard drive, with no problems.

  Then, I entered the program installation and makes the dvd the first boot drive. The first disc of recovery in the drive and it starts perfectly and started the process. I then went through the recovery procedure with the DVD 3 x on my computer, it seemed to work flawlessly, and after inserting all 3 disks in the order as requested, I was instructed to remove the final support.

  I have reset the boot hard drive and windows started normally until I got to this point. "the installation program starts services. Then comes a pop-up window saying; "windows could not complete the installation, to install windows on installation, this restart of the computer.

  Of course I tried to start in a few other ways to the f8 advanced boot options, but he always does this same thing.

  I can't imagine what the problem is that everything seems to go well until this?

  Hope you can help me solve this problem.
  Thank you
  Malc Fisher

  Hello

  Only thing I would say is that you need to install recovery image again. Please try it out and post comments.
  It will be interesting to know if the same thing will happen again.

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

  I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

  Try to turn off the computer with the power switch, and then restart.

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• "The build tools are not installed.

  I installed the LabVIEW FPGA Module of the 2011, the NOR-RIO 4.0 and NI LabVIEW Xilinx 11.5 tools.  When I hit the button on my FPGA VI, I get the message "the build tools are not installed" what module/driver/DVD installs the build tools?

  

  LabVIEW FPGA 2011 requires the Xilinx 12.4 tools to compile for objectives other than the Virtex-II.  These should be available on the 2011 LabVIEW platform DVD.

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.