Aspire acer 5251-1513.

Similar Questions

• I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

  I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

  See if this helps:http://www.sevenforums.com/tutorials/66482-memory-set-maximum-amount-used-windows.html

• Aspire 5251-1513 by using Windows 7.

  Windows logo appears then white screen. Had to remove the battery to stop.  Any suggestions as to why Windows does not load?

  try pressing F8 at startup and enter in safe mode, if it works, is probably a bad VGA driver.

• V3 Touchpad problem - 471G Aspire Acer

  Hi all, I'm on Acer Aspire V3 - 471G, installingSynaptics V15.3.41.5 of Touchpad. He works for awhile it will hang there. After restarting the laptop, it is OK but will block also after some time. I would like to confirm it is hardware problem?

  -Run this fix it.

  http://support.Microsoft.com/kb/971058

  -Run the System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  -Check the drive for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Aspire Acer Acer care center switch 10

  I downloaded the acer Center, but when I tried to install it, he just said that it is not supported. will be he never supported?

  Hi joxelletiong,

  Unfortunately, if the device is not currently supported, there not intend to go back and add support. We are working on a few changes to make this more clear information on our website and during the download process.

  I hope this information helps,

  Cory

• Laptop model Aspire Acer E5-571-51ZL running Windows 8.1 - lid opening to restore from hibernation?

  I changed the Windows power settings so that when I close the lid, it goes into hibernation. However, when I open the cover it does not boot up the laptop and restore after hibernation. I have to open the cover and press the power button and then it resets after hibernation.

  I have a much cheaper laptop Toshiba that comes automatically starts and restore after hibernation, when I open the lid. As far as I recall there is no special settings I changed so that the Toshiba to work like this, just the setting in the Windows power option that allows roll Hibernate when closing the lid. The Toshiba running Windows 8.0.

  This model Acer has this feature?

  If so, how I set it up to work?

  Thank you.

  Type of power in the search and choose "change the power buttons do". Is "Turn the fast startup" checked? If this is not the case, check it.

  Require a password? Do you need it to? Maybe the button / what else than the hibernation.

  I use not so much of Hibernate, I guess.

• Windows 7-problems with the laptop computer's System32 folder

  I bought this brand new Acer Aspire 5251-1005 computer laptop a week ago from Best Buy and it comes pre-installed with Windows 7. Everything went beautifully except for an unknown problem. A guy organized, I have some of my important programs pinned on my taskbar (for example, MSN, office, Skype etc.). However, when I right click in a program (ie. MSN) and click on a task (IE. Mail box), this task is not activate Instead, my System32 folder opens... Very weird.

  I searched on several forums. I tried to do a system restore (quite a pain to reinstall everything) and did not work. Tried to activate my guest account to check if my account is corrupted. This was not the case.

  If anyone has a solution (hopefully one that doesn't require too many steps) Please help me!

  I had the same problem with ACER 5251-1513, and it turns out to be a third trial that Shredder calledEgis Tec included with MyWinlocker suite program.

  After you have uninstalled Egis Tec Shredder, the system is returned to normal.

• Lack of Aspire V5 573g VGA port?

  You just bought a new V5 Aspire (ACER ASPIRE V5 - 573 G-54208G50AII). On the card it says that this computer has a standard VGA (D - sub), that I took to mean a plug 15 blue pins. I am misstaken? Instead, it has a port that it looks like a mini display port. The specifications are incorrect or if I should have a VGA port?

  Hello...

• upgade memory

  I have an Acer Aspire 5251-1513 with 2 GB of memory original. I never put to memory level, but would like to try. Can I do it myself? Everything I need is enough to play some MMORPG online, maybe a total of 4 to 6 GB? I tried to play the way of exile, but screen freezes and I get started... any help/suggestions?

  I think that your max RAM is 8 GB (2 x 4 GB).
  If you wish, you can replace one of your sticks of 1 GB with 4 GB, for a total of 5 GB.
  Without doubt, replace the two 1 GB sticks with 4 GB ones to get the maximum 8GB is the best option.

  I do not have access to the details of your model, but there is no doubt in my mind that you can make the update yourself. Note, however, that some are more difficult than others. If you have direct access to the RAM, which should be simple. If this isn't the case, you may need to remove the lower housing cover. Worst case, it's where you also need to remove the motherboard.

  Also note that increase the RAM may not allow you to play some games. You must ensure that your graphics card/chip set meets the software requirements.

• New hard drive to an hp probook 4530 s

  So recently my probook had a hard drive error and I have so I replaced the hard drive with a disc of an acer aspire 5251-1513

  and everything worked so far, the computer works but I need new drivers for my probook. And I tried to install these drivers, but they give me no chance. So I wonder if there is some way I can modify the pilots who were recently on aspires it and get rid of them so that they accept the probook drivers instead, or am I do this wrong and download drivers wrong, can anyone help please?

  Hello:

  There are too many conflicts when you install a hard drive from one model to another phone unless the material is almost exactly the same thing.  And I can tell you that you are comparing apples and oranges in your case. I'm surprised the same 4530 s started up Windows.

  Also if you have transferred the hard disk with a Microsoft OEM installed OS (in other words, the Acer Aspire came with the factory-installed operating system), which is illegal and violates the 3668Microsoft software license terms that you agreed to respect, you used a PC.

  I would phone HP on the link below for the country you live.

  Call the phone number for business PC / laptop and ask to order a set of recovery disc for your 4530 s.

  You will need to provide the model # and # of series.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you don't want to do that, you can try this place...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• whenever I have shut down my computer when I want to open up the homegroup stops conection

  When I stopped mt computer and then start it back up I have innovations cliick double right bar to access the homegroup, until it was even coneted the problem is solved and I have internet acsess. Anyone know whats ups with this? I have the 10 "aspire Acer one

  Hello

  1. which version of the Windows operating system is installed on your computer?
  2 have you made changes on the computer before this problem?
  3. What is the exact error message and the error code?
  4 What is a wired or wireless network?

  I recommend you check out the methods and check them off below if it helps.
  

  Method 1:

  Open the troubleshooter group living: http://windows.microsoft.com/en-US/windows7/Open-the-HomeGroup-troubleshooter

  Method 2:

  Why can't I access my homegroup? : http://windows.microsoft.com/en-US/windows7/Why-cant-I-access-my-homegroup

  See also: Home group from end to end: http://windows.microsoft.com/en-US/windows7/help/homegroup-from-start-to-finish

  Please provide more information, so that we can help you.

• How can I disable the toucnpad while typing?

  Aspire Acer 5742 laptop

  Your touchpad will support such a feature. Some keys have a button above them that activates / deactivates them. Some have a piece of software installed on your computer to control their and very little (my favorite) have a function that turns off when you plug in a mouse.

• GeForce GTX 980 TI

  Aspire Acer Predator 605 G3

  GPU: GeForce GTX 980

  CPU: Intel Core i5-4590 CPU @ 3.30 GHz

  Memory: 12,00 GB of RAM (11.92 GB usable)

  Current resolution: 1920 x 1080, 30 Hz

  Driver version: 353.30

  Operating system: Microsoft Windows 8.1 Pro

  I'm sure it's a 500 + power supply that exists in the required power supply for a Geforce GTX 980 TI would be a more than 600 or 650 +, but after doing some reading, the statement was made when it was said...

  then I went out and bought a power supply 650 and the Ti-980. It turns out that this Acer pc uses some stupid 12 pins that doesn't use any other pc.

  I assume that the connector is used to SUPPLY rather than the GPU, so be it we have a PSU that fits directly in that I can use a GTX GPU 980?

  Hello Durand1981,

  So here, the background comes down to this: use Gateway (now owned by Acer) connectors owners 12v for their motherboards. This connector is unique to their products and creating a very difficult environment for those who choose to upgrade their PSUS.

  However, despite the difficulty of work around the exclusive wiring, there is a solution to this. It comes in the form of a DYI rewiring to set an adapter to make a 24 pins ON the connector that is compatible with the 12v rail. You can follow the instructions here if you want to explore this option.

  I personally recommend getting a new motherboard to complete your new GPU to make sure that no problem of compatibility - Although this might cancel your license OEM Windows OS. It is the easiest, although the most expensive solution, but it also provides an extra layer, ensuring that your system is ready for future upgrades and downtime than this mobo owner + PSU combo almost forbidden.

• Fix Windows Vista Home Premium through re-setup

  After that Windows Vista Home Premium Service Pack 2 kept getting the application hangs and therefore do not start quickly, correctly, restart or shut down, even in Safe Mode, it has become virtually indispensable for me to use cleanup utility by Acronis software black Armor backup drive Seagate to remve my local ACER vista hard drive PC desktop Aspire (ACER) C... and then temporarily install Windows XP(Service Pack 2 to start puis par le biais de mises à) Automatic day, Service Pack 3) to help the reinstallation of Vista, because I do not have a Windows Vista CD.   Acer had only installed Vista on the PC but apparently provided no backup for this operating system reinstallation CD. This, in turn, which caused difficulties for activation will be resolved by reinstalling Vista.  In what way, other than emailing Acer personal, then waiting for the purchase of CD to arrive, I can download it then re - install Windows Vista Home Premium so that I can easily reactivate Productdocumentation can comfortably upgrade to Windows Vista Ultimate or Windows 7?

  We don't know what you did on the Acer recovery Partition.

  Here's the General info re reinstall Vista (your XP installation does NOT come in the advice given):

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact Acer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, ACER is Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Wi - fi is de-energized and blocks the laptop

  Hello

  I've been hitting my head against a wall trying to get this fixed a problem and have constantly searched the Internet to try to find an answer, but found nothing.

  Here's my problem: my laptop automatically connects to my connection at home without any problems after the start, but after any where between 2 minutes - 4 hours, the small yellow warning triangle comes before the symbol of the connection. He says I'm always connected to the network but no internet access is available. (4 + devices are also connected to this network, all without any problem) When I run convenience store it says there is a problem with the wireless network card, he's trying to reset and just it turns off, then it trys to reactivate and my laptop goes down. If I run this utility and just try to disconnect from the network and then reconnect it says "Windows cannot connect to this network.

  Here are the steps that I tried to resolve the situation:

  S ' installs in 2 feet of my wireless modem

  -Manually installed every possible driver available for my wireless network card

  -Restored my computer laptop back to factory settings.

  -Tried another wireless

  -Management settings power disabled to stop windows by disabling the network adapter to save power

  -Updated my laptop with every windows update could provide

  Despite all these steps that my problem still persists try, I see the forums are growing with people having similar problems and there appear to be no set in stone resolution to my problem.

  Plug-

  Aspire Acer 5750, Windows 7 Home Premium, Intel I5 - 2430 m 2.4 GHZ

  6 GB of DDR3 memory

  Broadcom 802.11 network adapter

  Any help would be greatly appreciated, thank you in advance

  Good detective work!

  Looks like that the wireless in your Acer hardware has failed.  I hope it is still under warranty.

  If this isn't the case, you can buy one of these USB plug in wireless adapters.  If the internal wireless hardware has failed, the USB plug will work fine.  In some cases they work really better than the more inward.

  When you installed this, you should disable the on-board equipment.