Aspire E1-522 Windows 8.1 wireless TKIP encryption is no longer available.
I recently updated my Windows 8 - Aspire E1 - 522 to 8.1 Windows and now I can't connect to TKIP encrypted networks.
I have even tried to manually create wireless profile, but does not give an option TKIP for encryption.
I tried to install that recent driver built Atheros directly to anything did. From what I've read on the internet until now, I'm afraid that Windows 8.1 has actually withdrawn TKIP as an encryption option.
This is necessary because my college uses TKIP with their wireless network.
The problem has been resolved without restoring the system to 8.0.
Had to install drivers Atheros to build versions, versions not Acer or Microsoft.
A reboot is required after installing the drivers.
Note: The option for TKIP is still not available, but when you connect to the network it will automatically connect using TKIP encryption at authentaction.
Tags: Acer
Similar Questions
-
I use WIN XP as my main OS and I want to ugrade it for WIN VISTA Home Premium, but the ADVISOR WINDOWS VISTA is no longer available! How will I know if all my components are compatible with WINDOWS VISTA before I buy it?
Hello
You should check with the manufacturers of hardware and program
and use the Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/
and read the vista system requirements
http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements
__________________________________________________________________
But Microsoft sells more than Vista.
They switched to Windows 7
If you are lucky, you could always find a copy of Vista to your local computer repair store
___________________________________________________________________
Why not see if your device is Compatible Windows 7
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
-
Aspire One 522 screen does not
The monitor left on my netbook (Aspire One 522 Windows 7), the machine works when connected to an external monitor. I tried upgrading the BIOS, but the screen does not always react. Anything else I can try before I get another machine for my trips?
Thank you
John
Hi John:
I had what seems to be the same problem with the AO722. It unfortunately turns out to be a pause that has developed in the display ribbon cable & camera near the hinge area - it's intermittent at first, but eventually the screen cover works (the problem of the famous black screen that is not fixable with a bios upgrade). I was forced to use either an external monitor or TV hdmi to work with the system until I finally took the laptop part (a royal pita, withdrawal plug-in keyboard was the worst part) and replaced the Ribbon by a piece of Amazon.com. The part number of the tape is marked on the Ribbon connector.
Right now, I try to avoid opening and closing the lid too to reduce stress on the Ribbon near the hinge area - the Ribbon takes a tortuous path in this hinge - I'm surprised that the original lasted as long as he did. Also, I covered the keyboard of the snap-ins with tape is easier to remove if I have to take off again - hope not! I use black tape to tape actually the upper part of the keyboard on the main body of the computer - not noticeable.
Jack E/NJ
-
Wireless LAN on Equium A210-1AS connection with WPA-TKIP encryption problem
I have a 1AS Equium A210 with Vista but cannot connect to the internet via a wireless router cable modem NTL using WPA-TKIP encryption and 5600 philips.
The laptop shows the base station wireless with a beep sound intense but said that the base of the station is not responding or is hidden when I try to connect to the internet.
I'm using the correct password.
I am able to connect to the internet via the base station when connected via the ethernet cable. Other old computers connect wireless with no problems.I heard that some combinations of chipsets with Vista can be the cause of some of these issues.
Clear advice or ideas on what I could try to get wireless internet would be greatly appreciated.
Have you checked to connect the laptop to the router WLan with WPA encryption settings? Please do. You must disable the WLan encryption to test the WLan connection
If the laptop could connect properly, then encryption is certainly the reasons why the laptop can not establish the WLan.
Maybe your wireless network card does not like this on the encryption support or you simply have to update the Windows operating system and the driver WLan.
-
How can I use my touchpad on my keyboard? I have an Aspire E1-522
How can I use my touchpad on my keyboard? I have an Aspire E1-522
I'm not very bright with computers.:-)Hello
What version of the Windows operating system is installed on the computer?
I suggest you consult the user manual or the download the manual on the manufacturer's Web site and check.
Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.
-
Aspire E1-510 Windows 7 drivers
I bought this laptop a few months ago. Aspire E1-510 Windows 8
I hated windows 8 and I was unable to get windows 7 on it until this month when I finally noticed that they put out an update of the bios. And I was able to get windows 7 installed.
After that I installed it. I noticed that the wired lan and wireless lan is not working. It took me hours to find the wired LAN driver, but it works finally. I searched the online wireless lan driver and I have installed, but it does not work.
It installed fine but when I go looking for wireless connection. There is no link. So the only way I can use the laptop is either wired or I plugged an old usb wireless in there.
Anyone have this exact model works on windows 7? I really hate windows 8. I just need the drivers or at least just the wireless driver to make it work.
Help, please
You can download drivers Acer E1 - 510 Windows 7 from here
They are the latest Windows 7 drivers for Acer E1-510, they are available in 64-bit and 32-bit format.
-
problems of xbox 360 with windows xp sp3 wireless receiver
problems of xbox 360 with windows xp sp3 wireless receiver
Hi Frank Lucas.
(1) if it works well before?
(2) remember to make changes?
(3) you get an error message?
You can see the steps outlined in the article below
Troubleshooting your Xbox 360 Controller for Windows
http://support.Microsoft.com/kb/908888
You can also post your query on Xbox Forum
-
MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless
MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless
It is a Canon PIXMA printer - new. Everything seems to be downloading fine until it gets to the stage where the MP drivers are downloaded. At this point, an error message is displayed: "MP Drivers could not be installed" I tried to install with the method of USB cable but no luck there. I'm at my wits end at this point. All the advice - please help. Thank you.
Hello.
Try to temporarily disable all firewall or anti-spyware programs on the system when running the installation. It may be possible that another program is preventing the MP Drivers Installer.
If you continue to have difficulties, find more help contact us.
-
My Aspire 7557-7422 windows support fact 8
My Aspire 7557-7422 windows support fact 8
Hello
Windows 8, can be installed on any computer, the only problem that occurs is to find the appropriate drivers to match. In most cases, they adapt to Windows 7.
Concerning
-
I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It does not work correctly
-
Acer aspire one A150 windows xp family cannot repair driver intel.
I have an acer aspire one A150 windows family xp 32-bit, intel app will not end. At the end of the installation it unknown error occurred and ends up together. This is the one. The vreason I reinstalled it was yellow mng device identification of missing drivers for it. I visited site intel and tried to day with the same result. I uninstalled intel since remove computer reboot, always the same. I am at a loss. Any ideas?
I have an acer aspire one A150 windows family xp 32-bit, intel app will not end. At the end of the installation it unknown error occurred and ends up together. This is the one. The vreason I reinstalled it was yellow mng device identification of missing drivers for it. I visited site intel and tried to day with the same result. I uninstalled intel since remove computer reboot, always the same. I am at a loss. Any ideas?
http://www.Intel.com/support/motherboards/desktop/sb/CS-028426.htm
-
my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. up-to-date as the taskbar has disappeared from the bottom of the computer, I get the message error 2018375670 system, which can do it, I can't access anything on the computer
Hello
Here is the Vista Forums, you send messages to.
Vista doesn't do not part of the update free Windows 10, so 10 would not settle.
The free update is for 7, 8/8.1 and 10.
See you soon.
-
where can I get the drivers for multimedia Audio Controller for acer aspire M1100 for Windows Vista?
Tricky
-
Acer aspire 5610z installed windows 7
It seems that there are 2 or 3 attempts installation 7, now I have unallocated space, things hidden, how can I get rid of all versions of windows except vista factory and reclaim the space on my hard drive?
* original title - acer aspire 5610z installed windows 7, do factory restore vista family premium, how can I get rid of the windows7
You should have done a clean install of Vista's Custom, deletion of partition of Windows 7 during the process.
If you use the recovery disk from the manufacturer, contact them as to the correct way.
This isn't their recovery process, Microsoft...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you use a Vista DVD, read on:
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation
See you soon.
Mick Murphy - Microsoft partner
-
I have an Acer Aspire laptop with Windows 7. I have a problem. My "new folder" button does not work when I am on a page blank and do a right click on the page I get only breifcase and no new folder option. How can I fix?
See this thread and respond to Bruce Hagen.
Maybe you are looking for
-
can I use my laptop as a monitor for my g4?
can I use my macbook pro as a monitor for my g4 Tower?
-
Satellite Pro L10: How to arrange a pick up service under warranty
Look, I don't know where to put this, but I'm at the end of my home with it. I know what the problem with my laptop (a Satellite Pro L10) because I've had this is the fourth time it happened.I just need to organise a pick up/repair warranty. I went t
-
which is a transparent lock double 2-bit bistable IC in multisim edition of analog devices
I need an equivalent IC for CD74HC75, which is a double 2-bit transparent latch IC for a simulation project. Can't find it in the reference guide of Multisim. Any suggestions?
-
Order of execution for explicit file dialog boxes and query the user input dialogue
Hello In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify? In fact, I just need the input
-
Size of changing WRT160NL files on data storage
I WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TO I managed with 2 partitions of 1 TB, one of 700 GB not visible in router. I'm okay with that. The problem is now when I copy my files. I try to create the