Aspire mouse usb and 603G problems

Similar Questions

• Mouse USB and keyboard problems in VMWare Workstation / Ubuntu 8.10

  I am running VMWare Workstation for Linux version 6.5.0 build 118166

  My host is Ubuntu 8.10 / 2.6.27 - 7-generic and I am hosting another instance of the same operating system on the same machine.

  The problem I see is that the keyboard and mouse misbehave / erratic from the host machine. It is a multimedia keyboard 1.1 Microsoft wireless

  There are essentially two problems:

  (1) dedicated cursor keys / pageup / to / home / delete do not work properly. For example, PageUp wants to take a screenshot.

  (2) the mouse seems slow to recognize clicks / trolling. For example, if I click on a tab in Firefox and move immediately, the tab starts to drag. Even if I click on an image and then move the mouse - drag is initiated.

  I tried several combinations of keyboard layout in the case of Ubuntu comments does not. No problems of this nature in the host, or an instance of XP comments.

  Any suggestions?

  Workaround KB 1007439 make a difference?

• No mouse usb and kbd work once Windows 7 installed on don't aspire z1 602

  When installing windows7 on aspire z1 602 kbd and mouse usb stop working and I am unable to finish installing.

  Windows 7 is not supported on your model and probably missing some drivers of Intel chipset.

• Problem with cursor and software problem (hard to explain)

  I have a very strange problem and forgive me because I try to explain it.

  For some reason any every so often that I could be typing or doing whatever it is and the application stops responding and a sound will play whenever I press a key. It's almost as if someone clicked on the desktop, so when I type it does nothing. As soon as I click on the program, he responds once again, and I can't begin to do what I want with it.
  This happens about every 2 minutes or so, sometimes more, sometimes less. It can be completely random.
  I tried different mouse and try to use another USB port. Still without success!
  Once again I apologize for the awkward explanation, but I don't really know how else to explain it.
  Thanks in advance!

  Hello

  1. the problem occurs with a particular program or programs?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• USB and ext.hd does not, but the mouse is?

  Windows Edition home premium 2
  Acer aspire 5930 portable

  A few days ago I tried to connect an old usb that worked for 2 weeks with no problems... The computer says there was an error on the disk, then windows Explorer froze and had to reboot.  Later I "fixed" error, after many gels, but still the usb wouldn't work.  I ended up formatting the disk.  Although a still takes a long time to open and recognize the usb, windows Explorer.  My mouse is very well (connected to a port targus 4usb thing), my printer is fine.  All my usb and hard drives refuse to connect to the computer.  USB device manager says they are all "unrecognized devices" yet less than a week ago that they were all works well without any problem.

  Usb had some .f90 (fortran) files relating to certain University evaluations, excel (including some activated macro for vma), power point, word, and pdf files.
  It seems that all of my USB with fortran files most of the problems, but they all had some one way or another.

  before you say MY FILES to UPDATE... ILS ALL ARE updated TO THE FULL they may be... This is what I did the last few days.  In addition, as I'm using a proxy, this auditor boring device DOES NOT WORK on my computer.

  Also when I try to format or delete the files from fortran, it comes up with the error:
  0x8007045D i/o device error
  any ideas?

  Thanks in advance

  Hi Alexander,.

  1. what format did you try? What is a NTFS format?

  Since it is a recent issue, you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• The USB receiver for my wireless one mouse overheating and now unusable

  Original title: what's happening with my mouse?

  My wireless Microsoft 5000 mouse: the usb piece has overheated to the point, you can actually burn your fingers on it and now it won't work.  It's the second mouse what has happened.  I had the same exact type of mouse before and it did the same thing, I thought it was a fluke and I love that mouse, so I bought another.  Of course, now it overheats too.  It is not my computer because I use other usb mice, and they do not overheat.  Is this simply faulty mouse, because I read of others having the same problem.  I spent $80 for 2 of them last year, can it be replaced?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you follow the link and check.

  I also suggest you to contact the manufacture of your computer and your mouse to check.

  http://www.Microsoft.com/hardware/en-us/support

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.

  Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?

  try to reinstall the Intel chipset drivers:

  http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%

  Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.

  or

  Press the logo windows + x

  Choose Device Manager

  Click controller series universal

  Right-click on the Intel USB controller, and then choose uninstall

  Once done, reboot and wait windows re - install the drivers

• Keyboard and mouse USB freeze after sleep

  Hello

  every time my pc from sleep, I wake up the keyboard and mouse freeze and stop working. They only way to do their job is unpluging and pluging the usb cables. I use windows vista 64 - bit SP2, rx250 mouse logitech and microsoft keyboard comfort 2000. The drivers and software are later. (Downloaded from the site Web from Microsoft and Logitech).

  All the solutions for that?

  Thank you!

  Hey guys, I solved the problem with the mouse.  I have the keyboard and mouse plugged into the back.  Initially, I had the mouse and keyboard connected, in this configuration to include only the mouse was frozen.  I went there where their vertical connected to each other, that is to say the keyboard on top of the mouse on background.  that resolved the =)

• Microsoft wireless mouse 1000 and receiver Wireless USB keyboard 800 has been damaged

  I had brought the combo of Microsoft Wireless Mouse 1000 and Microsoft Wireless Keyboard 800 a few months back, but accidentally my Receiver USB got damaged (physically) then, of course, he will not be replaced under warranty then please tell me how can I get new receiver for my mouse and keyboard. If it is not possible to get the receiver just tell me that if I buy the new keyboard 800 then receiver will work for my old mouse and keyboard or not. Any help to solve my problem will be highly appreciated.

  Logical greeting,

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Before contacting the Microsoft Hardware support, you can check the link below.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  I hope this helps.

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Windows vista and the problem with the window updates more computer or mouse freezes

  I have window vista system.

  Impossible to update versions of window

  mouse/computer frequent freezing problem

  have installed McAfee total protection

  Hi DilipAssar,

  ·         What happens when you try to run windows update?

  ·         You receive an error message/code?

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What exactly is the computer or the mouse gel?

  Search for the error message for the updates that have failed to be updated.

  To check the update fails, follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot State before proceeding with the installation of windows update.

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  How to activate a strategy disable Usb drive but the keyboard mouse printer and the usb datacard work machine Windows 7.

  Hello

  In order to get better assistance to the group policy setting to block the use of a material to a computer, you should post your query in group policy on TechNet forums. I provided the link below, please use it to more assistance with Group Policy:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  I can't create a new thread there matching your query will help you to better understand the implementation of group policy.