Portege R700 - the display hinges are loose

Similar Questions

• Re: Satellite S2540-101 - the display hinges are dead

  Anyone know where I can get a new screen for my Toshiba Satellite S2540-101 hinges. Flip flops on screen at 180 degrees!

  I tried eBay and nobody seems to have any!

  See you soon

  Dave

  Hi Dave

  I can imagine that it can be difficult to find these pieces for this older model laptop. eBay is the right place to search for such parts. You can try to contact the service provider allowed in your country, but I'm pretty skeptical, they will be able to order these parts.

  But I think they can help you and give you the exact order number. Using this issue maybe you will be lucky and find this Googling pieces around.

• HP Envy 6 1080 ex the display hinges

  Left hinge of my laptop screen is broken. It wasn't any kind of improper handling. He's just on a part-by-part.

  I contacted the HP's Service Center and they said that this is the protection against accidental damage and unsecured. To apply for this, you must go to your retailer.

  I bought this laptop from Saudi Arabia in Oct 2012 Extra stores. I am currently in India.

  The warranty expires October 18, 2013.

  I contacted HP guaranteed people in this regard. Apart from the generated response automatically is there was no response from the people of HP. I sent their 6 Oct. Stores Extra pair did not.

  I googled "hp envy 6 1080ex the display hinges" and the first result I got was some complaints in the hp forum about hinge problems all over the world.

  I came to the conclusion than that a flaaw design. If HP must take care of this, even if it's not under warranty.

  I hope that someone from HP will help me.

  

  

  I have forwarded your message to the right people for their review. You should hear from someone bit via private Message on this forum.

• my desktop icons have turned all of a sudden really big, but the display settings are still normal?

  my desktop icons have turned all of a sudden really big, but the display settings are still normal? is there something more, what can I do?

  Displaying the desktop, hold down the CTRL key and rotate the mouse wheel to adjust the size.

• Repairing damage dv6: the display hinges

  Well, to put it simply, my screen DV6 was open beyond its limit and ripped off.  This thing was sitting for a while, I didn't want to mess with it, until yesterday, I found that it still works fine, except a small gouge in the corner of the screen... so... I would like to see if I can get this thing back together.

  The hinges out of the laptop and have a plate towards the inside and the outside. Flanges from the outside have been uprooted and still attatched to the screen itself. More thick, inner flanges torn bosses screw out of the rear plastic shell.

  I tried to climb through JB weld, but the plastic is simply too weak to hold even temporarily the screen long enough to try and epoxying the other side of the hinge back together.

  At the flanges of hinge outward that the screen itself is around not broken, I'd get a new rear cover of the screen and swap everything out. But, as the metal hinges themselves need to be replaced, I'm lost.  Could I do it myself? I don't know if I'm sailing around I can find a diagram or something that could give me some clue. Someone did he do this type of repair before?  I'm not really that worried for the plastic hinges covers, but it can be other welded parts bradded or plastic, I'm not able to replace...

  You figure now, man would hide their valuables before you broke up with the girlfriend of crazy...

  Hey AndrewH85,

  I see that you have a problem with the screen and hinges.

  The best way to go here is probably find a technician to replace it for you.

  It's much more complicated than many people think, especially if you have a problem with the LED/LCD screen inside the screen.

  Now, I recommend to replace it yourself. You can call HP @18004746836 and see if they have an option to help you fix it.

  THX buddy!

• Satellite 2450 - the display hinges loose

  The screen on my Satellite 2450 lost its resistance on the hinges, its either fully open or fully closed and will not be held in position.

  The speakers or the other side of the hinge have lifted a bit, I can get in and repair the damage?

  Hello

  I'm sure that it is possible to fix it. But I think you need new hinges.
  These parts, you can order from Toshiba service partner in your country.
  But without any experience, it is not very easy to replace.
  I recommend you ask guys to service for advice and guidance.
  Do not remove anything, if you n? t know how to do this.

• Options output/display the display log are redirecting to browser automatically in Oracle 11i applications

  Hello

  Can someone let me know the what is the option to change the popup options in oracle applications 11i.

  My requirement is when I click on the options output/display the journal should it appear he himself, rather than redirect to the browser.

  Version of the application is: 11.5.10.2

  Thank you

  Govind

  Hello

  Clear the value of the following profile option:

  Viewer: text

  Kind regards

  Bashar

• display hinge screw dv9200 ez345av

  I need screws for hinge bar that attaches to the display (many are missing). This is for EZ345AV laptop (Pavilion) dv9200 CTO.

  Thank you

  JLO

  I have provided a few photos of locations and a description of the screws and screw.  You might try HP PartSurfer to find the screws, or another place that sells the equipment.

  two screws Phillips 7 mm P1 staring right at the bottom of hinge
  the base box.

  Then, the two 4 mm P1 Phillips screws that attach the left and right hinge covers

  

  Everything into the display panel, remove the two (he could have four) screws screwdriver 7 mm P1
  fix the left hinge:

  I hope that these images and descriptions of screws.  The images should be good.

  Thank you

• Equium A200 - how to remove the display?

  Hello.

  I need to remove the screen on my Equium A200 but there seems to be no screws to enter.
  None of the guides I found works for this model.

  No one knows how to do?

  Thank you
  Dan

  Hello

  Disassembly of the laptop is not really easy it s really complicated.
  If you have no experience so you should not do this, you may damage other parts

  But as far as I know to remove the keyboard and the top cover Assembly.
  Then you can remove the four screws under the rubber covers. This allows you to remove the LCD screen bezel.
  New measures, you will need to remove the screws from the display hinges.

  As I mentioned above; It's not so easy and be careful if you would remove anything

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• Windows display settings are not optimized

  I tried to fix it and he said that the display settings are not optimized that means

  Hello

  This fixit?

  Have you tried to make the resolution equal to the native resolution of your screen?

  Right-click on an empty part of your desktop, and then click Properties. Click on the settings tab, drag the slider to the right. This should give the native resolution of your monitor. If not you may need to get the latest drivers for the graphics card.

  If that makes things too small, you can try to slide to the left to get a lower resolution but I suggest using only a resolution that maintains the same ratio as the native resolution of your screen.

  Tricky

• When Vista (Home premium) end its commissioning, my switches in black and white color scheme. I can't go back to the color. I looked at the display settings and they say all in colour, however, I am always shows black and white.

  Color screen is permenantly black and white. cannot change color and all the display settings are in color. Monitor is always on the color, its just something that vista went to. At the start of vista, it's after start of switches in black and white and color. I can't see where it get back to normal.

  Hi shamorau,

  Welcome to the Microsoft Answers site!

  (1) do you have because of recent changes, after which the problem occurred?

  The first thing I would say is to update or rather uninstall and reinstall display drivers and who might have to deal with the issue.

  Also I suggest you try to use another monitor to see if it is not a problem with the monitor.

  Let us know if the problem persists after the driver updates.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Position of the display value box

  Hello
  I can't find anything on google or here on the forum who can help me to set the right position for the display of my checkbox value.
  
  current appearance:
  Checkbox
  
  As you can see the position of the display value is not the same level with the element.
  
  Is it possible to get them to the same level?
  
  I am using APEX 4.0 on 10 g.
  
  I forgot: the display of the checkbox value is located in the text of item Post. Is not a static LOV display value (I'am using the LOV static to return the value "1"). Reason for this is that the display value for a static LOV will ignore their HTML (HTML is displayed as normal text). This is the reason why I put the display value are in the text of message item.
  Besides, my display value includes html and regular text.
  
  NEDO
  
  Edited by: Mr.Nedo the 27.05.2011 12:01

  Hello

  According to my knowledge, that this problem is related to the model you have chosen, then change the model and check the output.

  Thank you
  Stefan Bosamiya,
  + 91 76000 23053
  http://jbosamiya.blogspot.com

• The display is loose on my Portege R500 - how to tighten the hinges?

  The display is loose on my portege r500.

  Does anyone know how to tighten the hinges?

  Hello

  I think that this procedure is very delicate and in my opinion it s a job for a technician.
  I m don't know if you can tighten the hinges if necessary he s need to replace the old hinges

  Is it the hinges are hidden under the plastic around the screen frame.
  The LCD mask is fixed with screws I m but not quite sure how much could be three screws. They are hidden under the mask of small cushions.
  You will need to remove and the tightness of the extra mask.
  Then you can remove the LCD mask. The hinges should be visible now

  But there s more complicated as it may seem the R500 is a nice unit, and it would be a shame that you would damage the LCD screen. The LCD screen is an expensive part, and in my opinion it is worth to ask a professional for help

  Welcome them

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).